How To Clean Mold In A Shower
This article was co-authored by Mike Kapur. Mike Kapur is a home inspector and the owner of Sonic Home Inspections, a home inspection company in Westchester, New York. With over 15 years of experience in pre-inspecting properties, Mike specializes in mold, radon, asbestos, lead, water, and air quality testing as well as hazardous materials, pest, infrared, and general home inspections. Prior to founding Sonic Home Inspections, Mike worked pre-inspecting apartments. Mike holds a BS in Accounting from Queens College and is a Certified Mold Assessor in the state of New York. This article has been viewed 24,372 times.
To rid your shower of mold, first use a vinegar-borax solution to kill the mold. Alternatively, you can use a vinegar-hydrogen peroxide solution or straight peroxide to kill the mold. Mold stains may remain after ridding your shower of mold. If they do, then use a baking soda paste to remove the stains. Prevent future mold growth by keeping your bathroom well-ventilated and by spraying your shower with a water-vinegar solution after you finish showering three to five times a week.
Concrobium Mold Control Spray Additional Info
Concrobium Mold Control Spray is a revolutionary mold and mildew control that kills mold, prevents mold from growing back, and leaves surfaces clean. Its ideal for use in humid areas such as bathrooms, showers, and kitchens. In addition, it will prevent the growth of mildew or mold on grout and tile. It also works great to remove musty odors from basements after floods or leaks.
It goes beyond just eliminating mold on the surface. While bleach, which can damage clothes and creates fumes, targets only the top portion of the mold, Concrobium goes deeper. Mold Control encapsulates and crushes the whole mold spore instead of leaving the molds roots intact, leaving nothing left to regrow.
An all-natural solution for mold, mildew, and fungus control without the use of harsh chemicals. The spray contains enzymes that work with the environment. This non-toxic formula doesnt contain harsh or harmful chemical agents that can damage surfaces and furnishings.
Concrobium mold control spray requires no scrubbing or rinsing and will not discolor items. The #1 mold control product on the market. Its an easy-to-use spray that kills and prevents mold growth in your home.
How To Clean Mold From Bathroom Ceiling
If you see mold spreading across your bathroom ceiling, you need to do two things. First, identify the source. Is there a leak above the bathroom? If so, eliminate the leak before cleaning mold from the bathroom ceiling. If the mold is caused by moisture in the bathroom, consider adding an exhaust fan or running a dehumidifier to reduce heat and dampness.
The next step is to clean the mold from the bathroom ceiling. Start by spraying the area with a vinegar solution. If the ceiling is coated with paint or another finish that allows for scrubbing, spray the vinegar directly on the ceiling and wipe with a clean rag. If not, you will need to scrape off and replace the affected ceiling area. Removing a textured ceiling covered in mold is a job better left to mold removal specialists, as it requires special ventilation masks and protective clothing.
Recommended Reading: How To Clean Mold From Leather
How To Clean Black Mold Off Silicone In The Shower
The shower is the perfect temperature and as you are about to step in, you see black mold on the silicone in the shower! You think to yourself, How can that be? I keep my shower clean! Well, black mold can grow in the shower because of moisture and water.
How do you clean black mold in the shower on silicone? Try spraying white vinegar on it and then wipe it away. Will this always work? Yes! Vinegar is strong and works just like a chemical without harmful effects. This is the most environmentally friendly and healthiest way to start before moving to harsher chemicals if needed.
Lets take a look at black mold and silicone, how to clean it, how to prevent it, and warning signs it may be getting worse.
Natural Options For Removing Mold
Bleach is great for removing mold, but to be honest it isnt the greatest stuff to expose yourself too. So for those of you that prefer more natural options for removing mold then you can try substituting bleach for any of the following.
White Vinegar: Vinegar is a great natural cleaner and is known to kill most varieties of mold. It can be applied as straight vinegar or diluted slightly if the smell is too strong for you.
Baking Soda: Mix baking soda with small amounts of water to form a paste and let it sit on the mold affected area for 10 20 minutes. Then use a bit of elbow grease and a nylon brush to scrub that mold out of existence! If you want to make a stronger paste, then use vinegar instead of water just dont use too much vinegar as this is also the method to make the famous model volcano.
Read Also: How To Clean Mold From Boat Seats
What Didnt Remove Mold
When we first moved to our current house, I did a little research and experimented with a number of methods touted to remove mold from shower caulk. Im sure there are even more techniques than the ones listed below, but heres what did not work for me:
- Saturating the affected area with straight ammonia. This may be incredibly effective, but personally, I detest the smell too much to even try. And since I often use bleach when cleaning I figured it was better just to stay away from this one completely since combining bleach and ammonia produces toxic gas.
- Spraying with vinegar. This method proved completely worthless for my situation, although I believe it has some merit as a mold preventative. I do love vinegar for glass cleaning though! Take a look at this DIY cleaner I use.
- Making a baking soda paste with water. I found this only minimally effective on tough mold. Baking soda is a great natural cleaner, though, and the gentle abrasiveness was good for cleaning the tile and some mildewy spots.
- Combining baking soda and vinegar. Lets talk about this for a minute because I see this combination recommended all the time online. Baking soda and vinegar cancel each other out. This is just basic chemistry, yall. Combining baking soda and vinegar produces carbon dioxide and salty water .
How To Remove Mold From Grout
Fortunately, there are several cleaning agents that work to remove mold from the grout between tiles. When cleaning the grout between tiles, first check to make sure the cleaning agent you use won’t cause any damage to that specific kind of tile. Some tiles should not come into contact with bleach or abrasive agents like baking soda.
You May Like: How To Clean Mold In Shower Grout Naturally
How To Remove Mold From Tile Grout
The essential items needed to remove mold from your tile grout are a stiff scrubbing brush, baking soda, and water. The removal steps are as follows:
- Step 1: Mix a pasteCreate a paste of baking soda with water, place it on the grout between the tiles and begin to scrub.
- Step 2: Clean moldAfter scrubbing, apply the elbow-grease mold removal tool, let it sit in, and clean the mold away.
- Step 3: Prolong scrubbingYou may need to prolong the scrubbing process so that you wont use much elbow grease the next time.
- Step 4: Rinse the tilesRinse the tiles with clean water.
- Step 5: Dry the areaTurn on a fan or open the window to remove humidity and moisture, which helps to dry the tiles and get rid of bacteria.
- Step 6: Black mold controlYou may need to control mold after every shower, with a natural anti-mold solution, which is a mixture of vinegar or tea tree oil and water.
How To Clean Mold Off Bathroom Walls
Similar to cleaning mold from bathroom ceilings, you can clean mold off walls with soap and water or vinegar in a spray bottle. If you have scrubbable painted walls, you can apply the vinegar directly to the mold and scrub it away. Allow the area to dry, then cover it with a stain-blocking paint. If you have tiled bathroom walls, follow our cleaning instructions in the following section.
If the mold has infiltrated the drywall or spread across the entire wall, it will be difficult to remove it yourself. Hire a professional to remove the mold instead. Disturbing that much mold could pose a health hazard and cause it to spread to other areas of your home.
Also Check: How To Clean Mold From Boat Seats
How To Clean A Shower Curtain Inside
If cleaning your shower curtain outside isnt practical, you can still get mold off your shower curtain by treating it inside. You will use the same cleaning ingredients from above, but play it safe and make sure you have plenty of ventilation.
- Remove the shower curtain and lay it in the tub.
- Spray a solution of two parts hydrogen peroxide and one part water onto the shower curtain.
- Let the hydrogen peroxide sit for five to ten minutes. Rinse thoroughly.
- Use a baking soda paste and scrub the mold until its gone. Rinse and repeat as needed. Since your shower curtain isnt laying flat, pay attention to the creases along the folds and seams.
- Flip the shower curtain and repeat.
- Hang the shower curtain from the curtain rod and let it dry.
Question 4 Of : How Do I Clean Mold And Mildew Off Of Wood
Don’t Miss: How To Remove Mold From Wood Cabinets
Types Of Mold And Mildew
Various mold and mildew can grow in the shower, corroding the bathroom surface and spoiling its appearance. The following are the common types of mold and mildew you must know before choosing the best shower mold cleaner.
- Pathogenic: These molds may cause infections to residents, especially children with weakened immune systems. A cleaner can effectively remove small infestations, while large infestations require professional cleaning agents.
- Allergenic: These molds may cause skin and open wound allergies due to long-term exposure. They are easy to remove with household disinfectants.
- Aspergillus: Exposure to aspergillus molds may cause extreme allergic reactions. They are usually found in humid places, such as showers.
- Toxic: Toxic molds generally produce toxic chemicals, which may cause severe effects on the human body, requiring medical attention.
Cleaning Tiles And Other Smooth Surfaces
To remove mould from smooth bathroom surfaces, including tiles or a basin, spray a cleaning solution onto the affected area and wait for it to soak in. There should be a visible coating, but try not to over-saturate the affected area.
Using a cloth or sponge, wipe the mould away, remembering to use a new side of the cloth when the first side becomes too saturated or dirty. You may need to use more than one cloth or sponge if you are cleaning a large area. If the mould isnt coming away, use a dedicated scrubbing brush.
Also Check: Moss Prevention On Pavers
What Is Black Mold
Mold spores form in the air and drop onto surfaces. If they drop on to moist surfaces, they become a breeding ground for mold to grow. This mold is often black but is usually not the same harsh black mold that can appear in other places in the home. There are many different types of black mold and this one can usually be easily removed.
How To Get Rid Of Mould In Shower Silicone
Need to know how to get rid of mould in shower silicone and other areas?
Mould in shower recesses, on shower walls or growing on the shower tile grout can be annoying, look terrible and cause health problems. Mould loves warm humid conditions so the bathroom in general and the shower in particular are very conducive to growth. Treating,removing and preventing mould in shower areas can be quite time consuming and labour intensive. So be prepared to expend some elbow grease.
You May Like: How To Clean Mold From Leather
Using Toilet Paper To Clean Mold Say What
Yes! Toilet paper can help clean mold! You use it to soak up the moisture and keep the vinegar on it so it doesnt have a chance to grow! If you have an area on the bathtub or shower that continues to see mold, try the following
Rmr 86 Mold Remover Additional Info
RMR-86 Instant Mold and Mildew Stain Remover Spray. It has a Scrub-Free Formula! Best cleaner for mold in shower, shower curtain mold, bathroom, kitchen, toilet, and mildew remover. Great for your kitchen to wipe countertops, sinks, stovetops, ovens, and more.
This instant stain remover cleaner will remove stubborn stains left behind by black mold that are often deep below the surface of your walls or other surfaces. It also removes unwanted odors while leaving your home smelling clean.
All you have to do is spray the cleaner directly onto the surface you want to treat. For example, this cleaner will instantly target deeply embedded stains that linger between bathroom tiles, in grout lines, under the sink, and on shower doors.
Just spray this cleaner for mold in the shower on the affected area and watch as it works! Youll be amazed at how easy it is. This cleaner is incredibly effective at removing the mold and mildew stains that have been plaguing your bathroom for years.
RMR-86 mold remover spray has the formula to eliminate these stubborn stains without leaving behind any harmful residue. The formula is also safe on virtually all surfaces. The RMR 86 is a revolutionary mold remover with the ability to instantly clean surfaces without scrubbing.
Read Also: How To Clean Mold Off Canvas
Question 5 Of : How Do I Get Mold And Mildew Out Of Furniture
How To Clean Mold From Bathroom Tiles
Scrubbing with vinegar or a borax solution is a great way to clean mold from bathroom tile. For small applications, mix 2 tablespoons borax into 2 cups warm water and funnel into a spray bottle. Spray the solution on tiles and let it sit for a few minutes. As noted earlier, you can also make a large-batch tile cleaning solution with 1 cup borax and 1 gallon of warm water. Use a mop or sponge to scrub away the mold. Whether you use vinegar or borax, there is no need to rinse the solution. However, you will want to dry the floor so the moisture doesnt encourage the mold to return.
To clean mold from bathroom tile grout, use the same borax or vinegar solution as before. Apply it directly to grout lines and let it sit. Use a toothbrush or another small bristle brush to clean mold from bathroom tile grout. For hard-to-remove stains, mix two parts baking soda with one part vinegar to form a paste. Apply it to the grout and let it sit a few minutes before scrubbing away mold. If desired, you can also use a commercial grout cleaner.
Editor’s Tip: Check your tile material before using one of these solutions. Vinegar can be damaging to some tile materials avoid if you have marble, slate, granite, or stone tiles.
You May Like: Mold Pros