Friday, June 14, 2024

How To Remove Mold From Bathroom Tiles

What Is Mould And Why Is It In Your Home

Cleaning Tile : How to Remove Mold From Shower Tile

Mould is a type of fungi and can grow on a range of surfaces both indoors and outdoors. Its a naturally occurring organism. Reproducing by making spores, mould prefers damp and poorly ventilated areas where it has easy access to water, which is its main food source.

Mould in the home can be caused by:

  • Poor ventilation

Why Do I Have Mold In My Shower

Its very common for mold to be found in the shower. There is lots of water and humidity in the bathroom which mold just adores.

Frequently running water in the shower creates wet surfaces and puddles of water. If you dont dry this moisture out quickly it can easily lead to mold growth.

On top of this, when the water in the bathroom does dry out it evaporates into the air and increases the humidity. Steam from the shower or a hot bath also makes the bathroom more humid. Since bathrooms are often not well ventilated the humidity tends to hang around and wet surfaces take a long time to dry out. Enter mold.

Another reason mold grows in theshower is because grime from body oils and soap scum which is washed off andonto the shower or tub create a food source for mold to feed on.

Basically, if mold were to have achoice vacation destination it would be the shower. Soooo inviting.

Is Bathroom Mold Dangerous

Fungus spores quickly enter the air, causing health problems for all residents. The lungs are the first to suffer.

If the foci of mold are small, then at the first stage of contact with its spores, a person may feel:

  • general malaise

If people are forced to live in a building heavily infected with mold, the complications will be very serious.

The fungus can cause allergies, such as persistent rhinitis or dermatitis. Air spores can lead to asthma and even cancer.

Recommended for you how to get rid of black mold around windows?

Recommended Reading: How To Clean Black Mold On Shower Grout

Does Lemon Get Rid Of Mold In Bathroom

The recipe is simple:

  • A teaspoon of citric acid or freshly squeezed lemon juice is added to a glass of water.
  • Apply to all surfaces with and near the fungus.
  • The product is not washed off.
  • The acid will keep the fungus from spreading. This product will perfectly clean the tiles and give them a shine.

    You May Like: How Much Does Mold Treatment Cost

    Scrub Away The Stubborn Stains

    How To Clean Bathroom Tiles Mould With Vinegar in 2021

    If youâre left with a few stubborn stains â particularly in between your tiles where itâs hard for a cloth to reach â try using a thin, stiff-bristled brush. An old toothbrush works really well, but just remember to throw it out afterwards so you donât accidentally use it when youâre half asleep in the mornings. Apply a little more bleach, and use the brush to vigorously scrub at the most problematic areas. In some very bad cases, you may not be able to remove all of the discoloration, but the mold microbes should have successfully been removed from the tiles. Discover here the best way to clean bathroom tiles!

    Safety warning

    Always follow the manufacturerâs instructions when using bleach, and wear protective clothing such as gloves and a face mask if necessary. Itâs a good idea to test bleach on a small area first to ensure it doesnât damage or discolor your bathroom paint.

    Now that you know how to get rid of bathroom mold, itâs also important to understand the best ways to prevent the mold from coming back. In humid areas like the bathroom and kitchen, stopping mold growth completely can be difficult â but itâs not impossible. Keep the bathroom as well ventilated as possible â keep windows open, for example, or install an extractor fan to draw moisture out. Preventing mold growth means you wonât have to clean it up again in the future. Cleanipedia has put together lots of tips on how to clean your bathroom for spotless results.

    Also Check: How To Clean Mold Out Of An Ac Unit

    How To Prevent Mold In Bathroom

    Fighting fungus in the bathroom is much more difficult than preventing it from happening. To keep your bathroom free from mold, follow these tips:

  • Monitor the humidity in the room. Inspect the condition of the pipes and plumbing for leaks. Pipes on which condensation appears should be insulated with an insulating tube or other material designed for this purpose.The air can be made drier by hanging a large heated towel rail in the bathroom or by installing a warm floor.
  • Provide good ventilation. Check how the hood works.
  • Make sure that no cracks appear on the walls and ceiling.
  • Black Mold In The Shower Method And Product : Toilet Bowl Cleaner

    Another product you can try is a regular toiler bowl cleaner. I have had great success using that as well. Use it the exact same way as method 2, in conjunction with a paper towel.

    But instead of soaking it, just pour the toiler bowl cleaner right on the spot, and then add the paper towel to kind of keep it in place.

    There you go, three methods and products that you can try to clean that black mold in the shower or bathroom or even kitchen tile.

    Happy cleaning!

    NOTE: For extremely tough moldy spots you may need to use a combination of all three of these methods and products. Start with the cheaper methods first, like bleach and toilet bowl cleaner. Again the gel works amazingly on grout on tiled walls.

    Read Also: What Kind Of Sickness Can You Get From Mold

    What Didnt Remove Mold

    When we first moved to our current house, I did a little research and experimented with a number of methods touted to remove mold from shower caulk. Im sure there are even more techniques than the ones listed below, but heres what did not work for me:

    • Saturating the affected area with straight ammonia. This may be incredibly effective, but personally, I detest the smell too much to even try. And since I often use bleach when cleaning I figured it was better just to stay away from this one completely since combining bleach and ammonia produces toxic gas.
    • Spraying with vinegar. This method proved completely worthless for my situation, although I believe it has some merit as a mold preventative. I do love vinegar for glass cleaning though! Take a look at this DIY cleaner I use.
    • Making a baking soda paste with water. I found this only minimally effective on tough mold. Baking soda is a great natural cleaner, though, and the gentle abrasiveness was good for cleaning the tile and some mildewy spots.
    • Combining baking soda and vinegar. Lets talk about this for a minute because I see this combination recommended all the time online. Baking soda and vinegar cancel each other out. This is just basic chemistry, yall. Combining baking soda and vinegar produces carbon dioxide and salty water .

    Planning a home sale soon? Our online home staging consultations give home sellers positive, practical, one-on-one guidance on how to prepare for a faster, more profitable sale!

    Ways To Prevent Shower Mold

    How to remove mould from the bathroom tiles using natural products
  • Practice good ventilation. Open the bathroom window when showering. Turn on the exhaust fan when showering and leave it on for 30 minutes afterwards. Keep the bathroom door open when showering if possible.
  • Shower drains contain biofilm and cellulose materials such as soap scum, body hairs, and oils and lots of moisture so they can be a breeding ground for black mold. It is important to keep drains open and clear of cellulose materials. Remove any hair after showering and pour a little vinegar down the drain weekly to keep the drain clean and prevent mold spores from developing.
  • After showering wipe down the entire shower including all your shampoo and soap bottle.
  • Once a week spray the shower with EC3 Mold Solution Spray or Remedy Mold Treatment Spray to kill any new mold spores that may be trying to root.
  • Clean your shower from top to bottom every 14 days at a minimum. Weekly is better but no one has time for that! So shoot for every two weeks.
  • If possible, DO NOT USE one of those suction cup non-slip mats in the shower. Those are a mold magnet.
  • Treat your shower with Superstratum Mold and Mildew Protectant every 6 months to prevent mold growth. You can read how and why Superstratum works here.
  • Read Also: How To Remove Black Mold From Concrete Basement Walls

    How To Remove Mold From Showercaulking

    The ideal thing you can do to remove black mold in shower caulking is to remove the caulking altogether and apply new high-quality mold resistant caulking like this one. This is important because a good mold resistant caulk will help prevent water damage and mold from happening behind your tile and shower walls.

    This is actually easier than itsounds. Even I can handle doing this. While it doesnt take long to actuallyremove and replace the shower caulk, it does require you to let it dry properlybefore using your shower again.

    Dont want to remove and replace the shower caulk? You can try this mold removal method but it is time consuming and usually doesnt get more than 50-60% of the mold.

    Do You Wish To Look A Shiny Shower In Your Bathroom

    As the bathroom is a place that remains wet and moist every time and so becomes the perfect home for molds. You can follow the above 3 tips for cleaning mold from the shower grout of your bathroom. Also, these tricks can be used for cleaning other grout tiles of the bathroom.

    As sometimes it becomes a tedious job to clean mold from small pore areas, so get a professional touch with My Cleaner. Avail the expert tile and grout cleaning service for removing mold. Book your appointment now at . Get new short updates on our , , and pages.

    Read Also: Can Black Mold Make You Sick

    Diy Mold Removal Cleaners For Tile And Grout Include:

    1. Chlorine bleachYou can use chlorine bleach undiluted or you can make a bleach and water mixture to spray on the grout. Never mix bleach with any other cleaners or agents as this can create toxic, life-threatening fumes. You also wont want to use bleach if you have colored grout, as it can cause discoloration.Work in small sections, applying the bleach, and scrubbing it in with a grout brush or toothbrush. Allow the bleach to sit for 30 minutes. Rinse with warm water, and repeat if needed.

    2. White VinegarVinegar is non-toxic and wont cause discoloration of colored grout. Spray undiluted vinegar on the grout and let it sit for 30 minutes. Scrub the grout with a grout brush or toothbrush. Spray more vinegar on the area, let it sit for another 30 minutes, and rinse with warm water. Repeat this process if necessary.

    3. Baking SodaMake a baking soda paste by adding a few tablespoons of water to a cup of baking soda, until youve reached a spreadable consistency. Using a grout brush or toothbrush, apply the paste to the grout and scrub it in. Let it sit for at least 10 minutes, or up to a few hours, before remoistening and scrubbing away the mold. Rinse with warm water and repeat if necessary.

    How To Clean Mold And Mildew Off Painted Walls

    This homemade tile floor cleaner will get your floors clean and save ...

    Related Articles

    Mold and mildew a form of mold in its early stages grow easily in damp, warm and humid or water-damaged areas. Not only are mold and mildew unsightly, but certain strains can cause allergies and serious respiratory conditions along with the damage they can cause to your walls. Safely clean and disinfect painted walls with common household supplies such as detergent and bleach.

  • Check for mold and mildew damage underlying the drywall before you begin. If the drywall crumbles to the touch or has large cracks in it, consult with a professional on how to proceed, otherwise skip to Step 2.

  • Prepare for cleaning and disinfecting by removing furniture or decorative items from the affected area. Wear protective rubber gloves, goggles and a mask to protect yourself. Lay plastic sheets down on the floor, over windows and vents and secure with tape.

  • Mix 3 parts warm water to 1 part detergent in a spray bottle. Spray the solution on the affected area. Scrub mold off with a rag or towel. Fill the second spray bottle with clean water and spray to rinse the area. Wipe dry with a rag or towel.

  • Make a solution of 1 part bleach to 2 parts water in the third spray bottle. Spray the mixture onto the affected area. Leave for 10 minutes, then rinse with the spray bottle filled with water. Dry with a clean towel, cloth or rag.

  • Things You Will Need

    Read Also: How To Get Mold Spores Out Of Air

    Read Also: How Much Does Plastic Injection Molding Cost

    What Youll Need To Remove Bathroom Mold

    These are just a few of the products and tools that can help you get rid of mold in bathroom areas.

    • Antifungal cleanser: Clean off black mold from grout and tiles with a product like RMR-141 RTU Funcigide.
    • White vinegar: Kills mold spores and slows down potential regrowth.
    • Soft cleaning brush or toothbrush: Use to scrub away black mold stains.
    • Standard spray bottle: Fill with homemade cleaning solutions.
    • Bleach: Brightens and disinfects surfaces after removing black mold.

    How To Remove Mold From Grout With Bleach

    Chlorine bleach is the most commonly used cleaning agent when it comes to DIY mold grout removal. It works well and not only kills the mold spores, but also disinfects the area and removes the buildup of soap residue from the tiles and grout.

    Method 1:

    • Mix one part bleach to four parts water in a spray bottle
    • Spray the affected area, wait for about 30 minutes, then scrub vigorously with a brush
    • Rinse with cool, clear water. Repeat the process, if necessary.

    Method 2:

    • Use a stiff bristle toothbrush to scrub bleach directly onto the moldy grout
    • Let the bleach sit for about 15-30 minutes, then rinse with warm water. Repeat as needed.


    • Bleach causes fading and discoloration, so it should not be used on colored tiles or colored grout
    • The fumes from bleach can be irritating to the eyes, skin and respiratory tract, so you need to wear a mask, safety glasses, and rubber gloves when using it. Keep the room well ventilated during the cleaning process and let the windows open for a couple of hours afterwards to make sure that all harmful fumes have left the room.

    You May Like: Why Is There Mold On My Plant Soil

    Remove Bathroom Mold With Mixture Of Water Peroxide Vinegar And Boric Acid

    Each component of this product will easily cope with mold, and together they will give an unsurpassed result on all types of surfaces.

    To obtain a working solution, take:

    • 4 tablespoons of water
    • 1 tablespoon boric acid

    The mixture is sprayed onto a mold-infected surface.

    We remove mold in the bathroom with a mixture of vinegar, peroxide, boric acid, and water:

    Looking For Cheap And Effective Household Cleaning Products Find The Best Offers By Visiting Here:

    Cleaning Mold: How to Remove Mold From Shower Wall Grout

    Looking for a new home, or just fancy a look? Add your postcode below or visit InYourArea

    Others advised adding baking soda to the mix. Trish Turner-Ryan wrote: Bicarbonate of soda mixed with bleach to make a paste. Put it over the grout with an old toothbrush. Leave for five minutes then rinse off.

    Paula Sherratt said: Bicarbonate of soda and white vinegar mixed to a paste on a toothbrush.

    Vinegar is another natural product that can be used to clean grout, and one cleaning enthusiast recommended using it on its own.

    Karen Anscombe wrote: Distilled white vinegar.

    Don’t Miss: What Kind Of Sickness Can Mold Cause

    What Are The Health Risks Of Black Mould

    According to the NHS, mould can cause various health problems, the most likely being breathing problems. These would include infections, allergies or asthma attacks.

    Health risks associated with mould include allergic reactions, such as sneezing, a runny nose, red eyes and skin rash. This is especially true if you touch or inhale any spores, which can cause an asthma attack.

    Therefore, those most likely to be affected are children, the elderly and anyone with existing skin problems and respiratory issues.

    According to Asthma UK, 42% of respondents to their 2019 annual survey said mould can trigger their asthma. They advise that if you experience cold-like symptoms in warm, damp environments, you could be allergic to mould.

    Furthermore, the World Health Organisation believes that many of the 300 million cases of asthma cases among children have originated or been worsened by mould exposure.

    How Do You Get Rid Of Mold In The Bathroom With Vinegar

    To do this, fill a spray bottle with white vinegar, spray the areas that are covered with mildew and let the white vinegar sit for a few hours. Once the vinegar has sat for a couple of hours, use a moist cloth to scrub the mildew off of broad areas and a toothbrush to remove it from hard-to-reach spaces like corners.

    Don’t Miss: How To Get Rid Of Black Mold In The House

    Preventing Condensation On The Toilet

    In all three cases described above, condensation is the primary cause of mold growth. Thus, prevention must hinge upon preventing or lowering the condensation. If you have a working bathroom fan already installed, the solution is simple. Run the fan. If necessary, a push button timer with 20, 40, 60 minute increments can help ensure proper ventilation occurs. Bathroom fans often lack sufficient power. Youll know this if youre still seeing condensation even when running the fan for 60 minutes after each shower usage. Time for an upgrade.

    If your bathroom does not have a fan currently installed, your options are much more limited. Opening the window can help, but this isnt comfortable in January. And realistically, most people wont keep the window open long enough to achieve proper ventilation rates.

    Popular Articles
    Related news