How To Remove Mold From Silicone Caulk

Best Shower Cleaners For Mold

How to Remove Mould from Silicone

1) Lysol Mold & Mildew Blaster with BleachThis Lysol cleaner is a great option for removing black fungus from the shower. This cleaner kills 99.9% of bacteria and viruses. Its a great option for removing soap scum and it will give a nice shine to the bathroom surfaces. This is a must have cleaner for your shower.

2) Puracy Organic Home Care SetIf you prefer to use a non-toxic all natural cleaner this is a good option. This multi-surface cleaner will clean the fungus from the shower and leave a pleasant smell behind. It is a plant derived cleaner that is the perfection option for non- toxic cleaning.

3) Complete Mold Killer & Remover DIY BundleThis cleaner is very easy to use. There is no scrubbing required, simply spray it onto the caulk sealant and let it sit for 15 seconds. It will remove and kill the fungus. This bundle also comes with the RMR-86 which will remove the stain caused from the fungus.

4) ForceField ScumBlaster BundleThis bundle kills and removes stains from black mold. It works well on hard surfaces, so it is perfect for the shower caulk. Spray this on the fungus, wait while it works some magic, and then rinse. You can spray this on daily to help prevent in the future.

The Process To Remove Mold From Under Silicone Caulk

Removing mold from silicone caulk requires time and technique rather than rushing into it do it when you are fully ready.

Make sure you have everything you need and gather knowledge on exactly what to do at each step. Black and pink mold are the most common colors of mold. If you see a lot of black mold in your shower caulk, it is a sign that something is going wrong with your bathroom surface.

To remove any kind of mold first of all gather the necessary tools and items. Such as:

Take Care Of The Molds Origin

Find out what is causing the mold. Not all mold grows on the top of your caulk. It sometimes grows behind tiles. To get rid of the mold for good, you will have to take off the affected caulk and tiles.

You might use a caulk remover to get the caulk off the tub and tiles unless it does not come off easily. When the caulk is soft, you can use a utility knife to cut it off.

Furthermore, use a hammer and chisel to take out tiles and look for mold or mildew behind them, and after finding them, use vinegar.

Also Check: What Do You Clean Mold With

How To Remove Mold From Silicone Caulksimple And Affordable

You keep the shower clean, but you go inside and see the mold there? Todays article will focus on how to remove mold from silicone caulk.

The first thing that comes to your mind is that its impossible, I keep the shower clean! But in fact, moisture and water are two components that are necessary for its appearance. Cleaning mold really doesnt require much effort.

Does Mold Grow Through Caulk

No, mold does not typically grow through caulk. Caulk is a material used to seal cracks and crevices in various objects, including walls and windows. It creates a seal that prevents water from spilling through and helps to prevent the entry of air and other debris.

In most cases, this prevents mold from growing since most species need moisture and organic material to survive and reproduce. However, caulk can become damaged over time due to age or general wear and tear.

In these cases, it may not provide an effective seal and mold may be able to grow in the area if conditions are right. In conclusion, while caulk is effective in most cases, it is possible for mold to grow if the caulk becomes damaged or starts to degrade over time.

Recommended Reading: How Do You Get Mold Out Of Shower Grout

Shower Caulk Mold Removal

When black mold is noticeable on the shower caulking, take the following steps to stop the growth process and remove the mold from shower caulking:

Act Now and Remove Mold from your HomeCall a Professional Mold Remediation Specialist or Get Up to 4 Quotes Now.

Step 1: Protect yourself by wearing the recommended gear listed below.

Step 2: Ventilate the area by opening windows and the bathroom door. Turn on the bathroom ventilation fan and open a window, if possible. Keep the bathroom door open.

Step 3: Mix one cup bleach with one gallon of water.

Step 4: Fill a spray bottle.

Step 5: Remove towels from the area to prevent spots on the fabric.

Step 6: Spray the area that has visible black mold.

Step 7: Wait 30 minutes and then rinse with fresh water.

If the mildew does not wipe away, it could be growing within the caulk. If the mold has penetrated the caulk surface, the only answer is to remove the caulk and replace it with mold resistant caulk designed for bathrooms.

During this process, if you begin to feel light-headed, leave the area for a few minutes. For extensive jobs, work in small increments of time to reduce the impact of the cleaning solutions.

How Can I Avoid Black Mould In The First Place

Mould loves warm, damp places. While you can remove it using the steps weve mentioned, its ideal to prevent them from happening in the first place.

Keep your bathroom well-ventilated and dry. Regularly clean sinks, bathtubs, shower tiles, and other areas prone to mold with vinegar, which is the most natural and powerful cleaning agent. Other alternatives include hydrogen peroxide or baking soda.

Here are other helpful ways to avoid mould:

Take shorter and colder showers. Hot showers lead to an increase in humidity, which encourages mould growth.

Keep humidity levels between 30-50% daily it would be better if you can keep it as low as possible. Humidity levels change throughout the day because of moisture changes in the air and air temperature, so its helpful to check humidity levels a few times a day.
Allow natural light into your bathroom. Natural light is known to prevent mold while killing many other kinds of microorganisms.
Make it a habit to check for leaks, and fix any dripping taps right away.

A ceiling exhaust fan is great in releasing humid air. Keeping the exhaust on for around 20 minutes dehumidifies the bathroom. If you dont have an exhaust fan, a stand fan will do just fine.
Wash shower liners and curtains regularly. Opt for mould-resistant materials such as polyester and fabric liners.

Also Check: How To Get Rid Of Mold Infestation

Prevent Shower Mold With Professional House Cleaning

Showers demand regular cleaning to save you from expensive mold removal and repairs. But with a hectic work schedule and busy family life, finding the time for any cleaning routine can feel impossible.

When you need a break from the stress of unmanageable cleaning chores, let Anitas find an expert local house cleaning service to take over. It only takes a few minutes to schedule a customized cleaning visit at a time that works for you. Request a booking today for all of your bathroom cleaning needs and more!

S On How To Prevent Mold From Coming Back

Easy way to clean black mould mold from silicone mastic sealant caulking.

1 Wash your bathroom furnishings at regular intervals.

Molds love to grow in damp places. The best thing you to do is keep the bathroom clean and dry after use.

2 Buy a dehumidifier or you can open the window after using the bathroom

These will keep moisture from staying in the humid area of your house, preventing spores from growing.

3 Put a humidity-removing houseplant in your bathroom.

This further prevents moisture from sticking to the caulk of your tiles. Not only will they dehumidify the bathroom but also give it a better-looking aesthetic. Plants that can remove humidity are:

Peace Lilies Wonderful houseplants that absorb water in the air with their leaves. They filter any impurities in the air, leaving a pleasantly refreshing scent. The best part they need little sunlight to survive theyre low maintenance.

Boston Ferns A well-known houseplant that thrives best in moist climates. They are ideal for bathrooms with how much water they can absorb. It will need more sunlight than peace lilies, and its soil must always have water for it to survive.

Palms- Great for hot, humid climates like the tropics, where they thrive. Theyre suitable for absorbing bathroom humidity and cleaning indoor air pollutants like formaldehyde. The best type is the reed palm plant since it can grow indoors with little sunlight.

Maybe you are also interested in How to Remove Rust Stains from Tile & Grout?

Also Check: How To Get Mold Off Of Ceiling In Bathroom

What Is Black Mold

Mold spores form in the air and drop onto surfaces. If they drop on to moist surfaces, they become a breeding ground for mold to grow. This mold is often black but is usually not the same harsh black mold that can appear in other places in the home. There are many different types of black mold and this one can usually be easily removed.

Other Ways To Prevent Mold And Mildew In The Bathroom

Mold and mildew are particularly prevalent in the bathroom because of the large amounts of moisture generated there on a daily basis. Consider taking some of the following steps to reduce humidity and prevent mold and mildew from forming in the bathroom:

If your bathroom is equipped with an exhaust fan, always turn it on before showering, and leave it running for at least half an hour afterwards. The fan will draw moisture out of the room and release it into the air outside.
Consider keeping the bathroom door open when showering to improve airflow and allow the steam to dissipate.

If possible, open the windows after showering to let in fresh air and light.
Clean the bathroom frequently and thoroughly with mold-killing products such as vinegar, bleach or ammonia .
Check the pipes regularly to make sure they arent leaking, as leaky pipes can result in pooled, stagnant water that spurs the proliferation of mold.

How To Prevent Black Mould In The Bathroom

Preventing black mould growth in the bathroom is all about moisture control. This means ensuring the area is adequately ventilated and, if possible, has access to natural light. Black mould growth in silicone sealant cannot always be avoided, however, minimising the humidity levels and moisture build-up can lower the chances significantly.

If you notice large patches of black mould or mould resurfacing frequently, reach out to a professional mould removal service team. Other ways to prevent mould in your bathroom may include:

Regularly ventilate the area with open windows or a dehumidifier
Use the exhaust fan while showering and leave it on for 30 minutes after use
Clean, wipe and dry shower walls and glass regularly

Clean and dry spills or leaks promptly
Do not overfill your bath or shower with products
Avoid leaving damp clothes, towels or bath mats in the bathroom

Clean the bathroom regularly

Tools And Protective Gear

Closely follow these recommendations to protect yourself from mildew spores that will permeate the air during the mold remediation process.

Gloves and eye protection must be worn to protect the skin from cleaning agents and mould spores.

A mask to cover the nose and mouth must be worn to prevent the inhalation of mould spores that are dislodged from the surface of the shower wall.
Place the bleach and water solution in an adjustable spray bottle.
Have a full bucket of hot clear water available to rinse the surface with a clean sponge.

For extensive mildew removal, wear a disposable paper overall that can be discarded when the job is completed.

Also Check: How Can I Find Mold In My House

Making A Mold Removal Solution

1Create a vinegar solution for a safe, non-toxic mold killer. White vinegar is a great way to remove mold from a variety of different surfaces. Pour the vinegar directly into a spray bottle to use it. It doesnt need to be diluted at all, as it is the most effective when it isnt watered down. You dont need to rinse away the vinegar after you have used it.XResearch source

Although the smell can be unpleasant, it usually clears within 1-2 hours. You can open a window or turn on a fan to help the smell disappear faster.

2Use a Borax solution for a natural mold remover. Borax is a natural insecticide and fungicide. Mix together 1 cup of Borax with 1 US gal of water and then pour the solution into a spray bottle. Simply spray the solution directly on the surface you want to clean. Borax doesnt need to be rinsed off, as it can prevent more mold from growing in the future.XResearch source

You can find Borax in the laundry section of grocery stores. It is a white mineral powder.

Borax is dangerous to consume, but unlike bleach, it doesnt release toxic fumes.

Always wear gloves when working with bleach and keep the area well-ventilated to avoid inhaling the fumes.

Bleach can cause eye, lung, and skin irritations.XResearch source

Recommended Reading: How To Clean Mold Off Bathroom Ceiling

So How Do You Fix Mold In Shower Caulk

Your shower provides the perfect environment for mold spores, which is why mold in shower caulk is a common complaint amongst homeowners.

Fortunately, there are plenty of DIY solutions that you can try to help you remove any mold that may pose a threat to you and your family. It may be best to call in a mold removal professional for a safe and effective solution for severe infestations.

You Might Also Like:

Don’t Miss: How To Get Mold Out Of Air Ducts

How To Prevent Mould Growing In First Place

There are a few preventative measures you can take to try to prevent the growth of mould on your silicone sealant.

Use The Extractor FanSome extractor fans come on at the same time as the light, others you need to manually turn on. Whichever way yours works, its important that you do turn it on to help remove steam and humidity. Clean the fan regularly to remove any dust build up so that it works correctly and efficiently. If you want to go the whole hog, why not buy an extractor fan which detects the humidity in the air and will always ensure humidity is controlled.

Open The WindowAlthough the job of the extractor fan is to remove the steam and humidity, you can speed this process by opening a window for a short period of time after you bath or shower. If this still isnt working, try a dehumidifier. Although an electric one will need a power source , absorbent dehumidifiers wont and can be utilised to good effect.

Wipe All SurfacesWiping down the surfaces to a dry finish after youve had your bath or shower can remove the environment that mould needs to thrive and grow.

Try An Anti-Mould SealantAlthough we make no claims as to whether they work, several anti-mould sealants exist on the market claiming to be able to prevent mould growth. Removing the old sealant and replacing with one such product could help to at least discourage the growth of mould.

Cillit Bang Black Mould Remover

Removing Black Kitchen Sink Mold from Silicone Caulking Sealant

Probably the biggest cleaning name out there, we all know Cillit Bang, and this particular cleaner has been made to remove black mould.

The strong chemical formula is able to obliterate the mould in your bathroom, without leaving any stains behind, and it will even work to remove them from your shower room walls and surfaces.

The results are visible within a matter of seconds because the solution works incredibly quickly to break the mould down, and there is no need to scrub it in you just rinse it off gently with a cloth.

It comes in a pack of three bottles, making this an incredible bargain you wont want to miss out on.

Also Check: How To Get Rid Of Mold In Refrigerator

How To Remove Mold From Shower Caulk

If you discover that mold has infiltrated your shower caulk, its important to know how to deal with it properly. Mold is tenaciousit has roots that can tunnel far past the surface of a material. That means that its not enough to just scrub it awayit needs to be destroyed completely to prevent it from returning.

To remove mold from shower caulk:

Vacuum or sweep up any dust or debris that has accumulated in or around the caulk.

Create a bleach solution and pour it into a spray bottle.

Spray your shower caulk with the bleach solution, paying special attention to the affected areas.

Let stand for at least five minutes.

Gently scrub the caulk with a sponge or soft bristled brush and then wipe it with a clean wet cloth.

If you find that the caulk is cracked, discoloured, or has been taken over by mold, its best to remove the sealant entirely and recaulk your shower.

What Causes Black Mould To Form On Silicone

Dampness is the main cause of black mould on silicone. Mold spores travel through the air, and they can stay alive even in extreme conditions. Mold will grow much faster in areas of high humidity, heat, moisture, low light, and oxygen.

Black mould tends to grow on shower caulk because this area is vulnerable to accumulating soap scum and water these are the cellulose that mould love to feed on. If left untreated, black mould will germinate especially in warm, dark bathrooms. Other causes of extreme mold growth are lack of maintenance, wet clothes, humidifiers, leaks, and condensation.

Be cautious to prevent inhaling the spores while cleaning it because exposure to mold is dangerous for your health. Some people are more sensitive to the harmful effects of mold than others it can lead to wheezing, a stuffy nose, respiratory problems, and itching in the eyes or skin. Individuals with asthma or allergies to molds will experience more severe reactions such as shortness of breath and fever.

Studies have also shown that children who are exposed to mold at an early age are more prone to developing asthma. Aside from children, even healthy people are at risk for acquiring health problems because of mold exposure. Other high-risk groups include those who have lung diseases and chronic respiratory disease, as well as seniors.

Removing mold from silicone and the rest of your bathroom is a simple yet effective way to protect your health from the dangerous effects of mold.

Recommended Reading: How To Mix Bleach And Water For Mold