Monday, June 17, 2024

Why Does Mold Grow In My Toilet

The Best Way To Remove Mold From The Toilet Bowl

How To Clean Mold out of a Toilet (

Steam clean it! Yes, you read that right! Bust out your handheld steam cleaner and steam the mold right out of your toilet. Heres how to do it.

  • Place the angle nozzle attachment on the hose of your steam cleaner. This is the steam cleaner I use.
  • Steam the toilet bowl and underneath the rim at high pressure to loosen the stains.
  • Direct more steam on the hinges and the toilet seat edges to loosen rust on screws.
  • Using the stream setting on a spray bottle filled with vinegar, wash off the loosened dirt into the toilet bowl.
  • Flush the toilet.
  • If you still see mold, repeat this process a second time.
  • When all the toilet mold is removed, wipe off any remaining drops of water or steam with a microfiber cloth.
  • Yep it is just that easy!

    What Causes Black Mold In Toilet Bowl

    Mold spores thrive in dark, damp places so its only natural to find mold in your toilet. However, some toilets can become moldier than others depending on your water or if you have calcium deposits built up in your toilet.

    Ive even heard that if your body has higher glucose levels from diabetes, your excrement can cause additional toilet mold!

    I Would Like To Know If This Is Due To Condensation Or Maybe A Issue Inside My Ceiling Also Is It Dangerous To Breath In And How Should I Get Rid Of It Thank You

    This is very likely due to condensation. Assuming this is an exterior wall, this is the coldest part of the room. The insulation in the ceiling above is often pulled back from the perimeter to allow air to enter through the soffit vents . This creates a cold spot. Condensation occurs when the warm & humid air interacts with this cold surface. In time, mold growth occurs.

    The amount of growth appears fairly small and can likely be cleaned with a detergent/water solution. Some staining may remain which will require repainting.

    Preventing regrowth can be accomplished by lowering the humidity in the home and installing more insulation in this portion of the attic. If soffit vents are present, be careful not to block these with the insulation.

    Also Check: Remove Mold From Canvas

    I Noticed Mold On My Daughter Bedroom Ceiling What Is Likely The Cause The House Is 5 Years Old And Fully Insulated And Vents In The Windows Any Solutions

    This is likely due to insufficient ventilation in the room. While the holes in the windows can help, most homes require more active ventilation. If you live in a climate with cool winters, simply running the bathroom exhaust fan can help quite a bit. A modern, well sealed home requires quite a bit of ventilation. Youll likely need to run an exhaust fan 12 hours per day. Ideally, this should occur periodically throughout the day, rather than 12 hours straight. A programmable timer can help achieve this.

    If the fan is old or loud consider replacing it with a Panasonic WhisperGreen unit. These run constantly at half speed and ramp up to full speed when the bathroom is occupied.

    If the mold growth reappears, check the attic space above. Often mold growth on outer edges of the ceiling is due to insufficient insulation in those areas. The cold air entering the soffit vents causes condensation to occur on the ceiling below.

    Pay Close Attention To Shower Curtains Floor Mats And Other Pieces Of Cloth

    Mold found during Phoenix Mold inspections

    Almost any place in your bathroom is a potential mold-growing place walls, windows, shower curtains and floor mats. Every time you step out of your bath or dry yourself, what you leave behind is actually a wet piece of food for mold. That said, it is very important to pay attention to pieces of cloth and additional equipment often found wet in a bathroom.

    Since shower curtains are in direct contact with water and often get wet without getting enough time to dry, you should change vinyl or plastic shower curtains for those you can actually wash in a washing machine. Look for cotton, hemp or nylon as you can easily wash them in hot water. Having done that, you can simply run them through the spin cycle of your machine to remove excess water. Leave it to dry, preferably outside, and you are one step closer to preventing mold from growing on your curtains.

    In addition, make sure your bathroom mats are washed regularly in case you have the non-slip kind. Use very absorbent floor mats that will help ensure the water splashed during showering doesnt find its way onto your tiled floor. Dont forget to dry the floor properly each time you clean or shower.

    Recommended Reading: How To Remove Mold And Mildew From Leather

    What Causes Toilet Mold

    Since bathrooms tend to have higher humidity levels it is easy for airborne mold spores to take root in a toilet bowl since it is often left open.

    Stagnant water is a great environment for mold. Toilets thatare used infrequently and not flushed often are more likely to develop a moldproblem than those that are flushed many times a day.

    If your toilet tank has mold growth, then it is passingthose mold spores into your toilet bowl. You can have a moldy toilet bowlwithout a moldy toilet tank however.

    Is There A Paint That Resists Bathroom Mold

    The type and quality of paint can make a big difference in bathrooms. Dont use a matte finish, they absorb too much water. The higher the sheen the better. Also, look for paints with an additional mildicide. Exterior paints often work well because they are intended to endure wet conditions. Lastly, installing a constant flow fan such as a Panasonic WhisperGreen can dramatically reduce any mold growth in the bathroom.

    Also Check: Getting Mildew Off Leather

    Where To Look For Bathroom Mold

    The main problem with bathroom mold is that it can appear almost anywhere from caulk to towels. Bathroom is perfect for mold growth due to a constant high level of humidity.

    If you want to check your bathroom for signs of mold, then you should pay attention to these places:

    • Caulk, grout, and tiles
    • Towels and bathroom robes
    • Shower curtains and mats

    Of course, if you are not sure whether or not you have mold in your bathroom , you can always rely on professionals to do all the necessary checks. Furthermore, they will provide insights into how to keep your bathroom mold-free. In case you already have bathroom mold, they will deal with it effectively to prevent it from coming back.

    Hi We Are Looking Into Purchasing This Home In Vt Sellers Say This Addition Was Put On In 2007 No One Has Lived In The Home For 3 Years They Believe The Mold Was Caused From High Humidity And No Dehumidifier Ive Been Researching And Everything I Read Says Not To Use Recessed Lights On Cathedral Ceilings There Is A Newer Metal Roof But I Do Not See Any Soffits Or Vents The Downstairs Now Has Mold On The Furniture And Walls But I Can Wipe It Of With My Hand Any Suggestions Thanks


    The mold growth is quite heavy for humidity alone. Its possible, but it would require an extraordinary amount of moisture i.e. long term water leak below. It would be highly unusual for a vacant home to accumulate this much mold growth without an active water/roof leak.

    One possibility is dripping from condensation in the roof assembly. An unvented metal roof with can lights below can become completely saturated. In severe cases, this can drip down onto the ceiling. Note, this would only occur in an occupied home. Either way, I recommend identifying the type of insulation they used. Also, make sure the can lights are AT rated. Additionally, look for rubber gaskets on the trim rings. This case is significant enough to warrant a professional inspection.

    You May Like: Get Mold Off Leather

    We Have Mold Growing On Our Bathroom Ceiling On The Outside Wall

    This growth is likely due to excess humidity and poor insulation. The warm, humid air from the home is contacting the cool spots in the ceiling. This leads to condensation and mold growth. Install a high quality bathroom exhaust fan such as the Panasonic WhisperGreen. Depending on accessibility, add insulation above this area in the attic.

    Using A Handheld Steam Cleaner

    So, a couple of my friends reported great success using their handheld steam cleaners to kill mold. So if I figured, why not share?

    To do this:

  • Using an angle attachment, place the nozzle under the bowlâs rim and steam. Ensure that you have high pressure and spread this all over the bowl.
  • You can direct the steam on the hinges and seat edges to remove rust .
  • Wash the loosened dirt into the bowl using a vinegar-filled spray bottle.
  • Flush.
  • Wipe away any residing water using a clean cloth.
  • Note: You can repeat this process until you get the results that you want.

    Don’t Miss: How To Clean Bathroom Ceiling

    Why Else Can You Have Mold In The Toilet

    Its likely that mold in your toilet is due to the environment of the bathroom itself. Because toilet bowls are perpetually wet, the growth of mold is encouraged. Bathrooms can also contain sinks and showers that contribute to moisture as well.

    Additionally, molds feed on nutrients that they get from plant and animal matter. Within a toilet bowl, they can have access to these nutrients in the form of urine and feces.

    Many times, toilet rings can develop when water is allowed to stand for a long time. This is why you typically see toilet rings close to the water line in the toilet bowl. Stains may also appear in the area when water flushes along the sides of the bowl.

    You can do several things to prevent mold from growing in your toilet. These include:

    • cleaning your toilet regularly using a brush and a toilet bowl cleaner
    • flushing toilets daily that are used less frequently
    • running the bathroom fan while showering
    • keeping your bathroom ventilated

    While symptoms of type 1 diabetes may come on quickly, the symptoms of type 2 diabetes can develop more slowly. Therefore, you may not know you have diabetes until you have diabetes-related health problems.

    Most people who develop type 2 diabetes have prediabetes. This is when blood sugar levels are higher than normal, but arent high enough to diagnose diabetes. Prediabetes typically has no symptoms.

    Could This Be The Roof Or Window Issue Recently Had Windows Changed And Came Back Again

    Why Am I Getting Black Mold On My Bathroom Ceiling

    Are you seeing condensation on the windows? Does the home suffer from poor ventilation? Mold growth along the wall/ceiling junction is often due to a combination of poor ventilation and missing insulation. This leads to a cold spot where the ceiling meets the exterior walls. Over time the condensation will lead to mold growth.

    The easiest way to verify this is with a moisture meter. Way until youve had significant rain, then run a moisture meter over the area. Moisture from condensation will typically not show up on a moisture meter. However, if its from an actual leak, it should register as wet.

    Don’t Miss: How To Get Rid Of Mold Spots On Bathroom Ceiling

    Hellowe Had Insulation Blown Into Our Attic We Are Concerned If There Was Mold Before The Insulation Was Installed How Do We Check That

    Its very unlikely mold would grow beneath the insulation. Condensation is the most common cause of mold growth in an attic. Condensation occurs on the underside of the roof sheathing, not beneath the insulation. Mold growth beneath the insulation would require a roof leak, which youd typically notice on the ceiling inside the home before any real mold growth occurred.

    Preventing Condensation On The Toilet

    In all three cases described above, condensation is the primary cause of mold growth. Thus, prevention must hinge upon preventing or lowering the condensation. If you have a working bathroom fan already installed, the solution is simple. Run the fan. If necessary, a push button timer with 20, 40, 60 minute increments can help ensure proper ventilation occurs. Bathroom fans often lack sufficient power. Youll know this if youre still seeing condensation even when running the fan for 60 minutes after each shower usage. Time for an upgrade.

    If your bathroom does not have a fan currently installed, your options are much more limited. Opening the window can help, but this isnt comfortable in January. And realistically, most people wont keep the window open long enough to achieve proper ventilation rates.

    You May Like: How To Clean Mold Off Bathroom Ceiling Naturally

    Mold In Toilet Removal

    The steps listed below will arm you with a plan for safely removing mold from the toilet. You will need rubber gloves, safety goggles and mask , a spray bottle, a mild household cleaner, a toilet brush, bleach, and distilled vinegar. A toilet brush is ideal to protect your skin from chemicals. However, if you dont have one, a rag will work.

    How To Avoid Future Mold Growth In Your Toilet

    How to Remove Toilet Mold that Keeps Coming Back | LITTLE KNOWN HACK

    To avoid future mold infestation in your toilet, these are some things youâll have to do:

  • Always open your bathroom window when showering.
  • Always turn on your exhaust fans during a shower and leave them on for 30 minutes when done.
  • Consider installing a dehumidifier if your bathroom has higher humidity levels. Leave it on for an hour after a shower.
  • Always flush after using the toilet.
  • Scrub your toilet at least once a week using a brush and vinegar/bleach/peroxide solution.
  • Always flush less frequently used toilets at least once a week to prevent mold build-up.
  • Take care of any bathroom leak as soon as possible.
  • Read Also: Mould In Bathroom Ceiling

    Clean It With Vinegar And Baking Soda

    The next task is to clean all the mold from the porcelain with white vinegar and baking soda. Mix the two elements using a small cup of each product apply it to the stains and scrub them softly.

    You can also use the toilet brush to remove sturdy mold marks. Next, you should leave the substance sitting for 20 minutes before scrubbing it with the toilet brush one more time.

    Flush the toilet, wipe the bowl with a piece of cloth, and youll see that porcelain looks like new.

    First Part: Cleaning The Toilet Bowl

  • Flush the toilet and get rid of any excess water, make sure to remove as much water as possible.
  • Get your toilet brush and your spray bottle of vinegar. Spray the vinegar inside the bowl and let it sit for a minute
  • Use the toilet brush to scrub the black ring until it comes off.
  • Repeat steps 2 and 3 a few times to get rid of the ring of black mold and any other spots of mold.
  • Flush the toilet a few times to get rid of any cleaner or vinegar you are using.
  • You May Like: How To Kill Mold In My Basement

    Mold In Toilet Bowl Keeps Coming Back

    Mold notice under toilet bowl rim, beneath the waterline, tank, even behind the tank. How much you have tried but mold in the toilet bowl keeps coming back. Right?

    I had the same problem with my Kohler Elliston toilet a couple of years ago, which is a less-used toilet in my house.

    In fact, after cleaning. I started using it regularly. Still, unreasonable molds keep coming and make it worse.

    I thought, why does my toilet keep getting mold? While applying everything, finally reaching my magical remedies, Mildew is gone forever, still not grow.

    Today you get the permanent solution for Molds and dont have to waste your time searching for so many hacks.

    Read more- What are the main reasons for causing Black mold in the toilet bowl

  • Final Verdict Mold in Toilet Bowl Keeps Coming Back
  • Why Does Mold Grow In My Toilet

    Why Does My Shower Smell?

    It is pretty common knowledge that mold thrives and grows in environments were there is plenty of moisture and darkness. While you probably think of an attic or basement as a great place for mold a toilet also fits the bill. There is a near constant supply of water in the toilet, both in the bowl and in the tank, as well as darkness in a bathroom with the lights usually turned off.

    Although mold could likely grow with no other assistance, the hidden residues left on your toilet are like a buffet for microscopic mold spores. Bacteria left behind by going to the bathroom and mineral deposits from hard water provide an ideal way for mold to latch on and thrive right there in your toilet. Some studies have even shown that mold can grow more easily in the toilet of a diabetic since there is more sugar residue in their urine.

    Read Also: How To Clean Mold Off Canvas

    What Will You Need

    Now, before you engage your gears, you need to have some important tools at your side.

    Some are very important as they will protect you from taking damage from the mold. Some also cover your clothing to avoid taking damage from some of the cleaning agents .

    Therefore, aside from the 3 cleaning solutions mentioned above, youâll also need:

    • Cleaning mask
    • Cleaning rug

    Got all these checked? Great! Letâs get startedâ¦

    Tip: Ensure that you have turned off all water supply into the bathroom. Turn off the bathroom water valve to do this. You can locate it behind your toilet. Afterward, flush and drain all the water from the tank and bowl for easy access and maneuvering.

    Signs That Mold Is Growing Inside Your Appliance Water Lines And Pipes

    Most homeowners in high humidity areas are aware that mold is a risk, and that any amount of flooding or water damage can make it possible for mold to grow in your walls, under your furniture, and in damp piles of laundry. You may have fought mold trying to grow on the bathroom grout just because its always a little damp in your bathroom. Or noticed mold grows all too readily on any bread kept in the house.

    But did you know that mold can grow inside your homes water pipes? While not the most commonplace for mold to grow, it is possible and happens frequently enough that every homeowner should be on the lookout.

    Don’t Miss: How To Kill Mold On Bathroom Ceiling

    Popular Articles
    Related news