Saturday, May 18, 2024

Is Dry Fog Mold Removal Safe

The Importance Of Cleaning Before And After Fogging

Phoenix Mold Removal – Demolition Free, Wall Cavity, Dry Fog Demo

The primary purpose of a disinfectant or botanical fogging is to remove mold from the home. Unfortunately, soil and dust can protect the mold, circulate it in the air, or disinfecting without prior cleaning can give a false sense of safety. Clearing the room of all extra items that can collect dust is essential. Disinfecting a room will kill microorganisms on surfaces however, it will not necessarily address the airborne spores. Professional mold remediators who use disinfectants will properly seal the room and use negative air pressure and air scrubbers to remove the airborne particles. More importantly, exterminating the life of the mold organism does not completely eliminate the risk. The debris and mycotoxins, which are toxic chemicals, remain harmful to humans.

If a surface is fogged before it is cleaned, the remaining soils can still contribute to the growth of harmful microbes and lead to further contamination. The residual soils may also serve as a barrier, preventing the disinfectant or botanicals from reaching the surface and doing its job. Lingering soils on the surface may affect the active chemicals in a cleaning product, impacting their efficiency. If the surface is thoroughly cleaned first, the disinfection step becomes much more effective.

Other Ulv Mold Fogging Tips

  • I like to put the handheld mold controlfoggers on the finest mist setting. This offers the most coverage withoutsaturating everything.
  • I literally spray everything in my home. Themist is so fine that I havent had any problems spraying electronics with it.It doesnt leave things wet on this setting.
  • Not only do I spray all the furnishings, Ispray the counters, walls, ceilings, floors, window coverings, beddings, insideclosets, etc
  • Since vehicles can become easilycontaminated, I use my mold prevention and mycotoxin removal protocol in my caras well. It takes about five minutes with the fine mist and my car feelwonderful afterwards!

Pure Maintenance Approach Demolition

Our patented two-step Dry Fog process safely destroys microscopic mold spores both in the air and on surfaces and prevents their return.

The whole process takes a day or less, at a fraction of the cost charged by most competitors. Remove mold and prevent it from returning by spending less time and money.

Don’t Miss: How Long After Water Damage Does Mold Grow

Tip : Make Sure Your Bath Fan Is Big Enough

The next thing to consider for how to prevent mold after water damage is whether your bath fan is big enough. If the fans arent clearing out most of the moisture in your bathrooms after five to 10 minutes, your fans may not be moving enough air. Fans are certified by the volume of air exhausted out of the room. To find the recommended fan capacity for your bathroom, multiply the bathroom square footage by 1.1 . Check the cfm volume of your fan, usually marked on a label under the grille. Replace it with a larger model if its too small for the size of your bathroom. Heres what to do if you spot mold on your bathroom walls.

Serving Brockton New Bedford & All Of Southeastern Massachusetts

Mold Remediation &  Removal

Dry Fog

The tiny particles penetrate porous materials and rebound from surfaces creating a dry vapor. The vapor creates an inhabitable environment that mold and bacteria, cannot survive.

Wet Fog Or Mist

Large wet droplets burst, causing surfaces to become wet. The larger particle size also leaves gaps in molecular coverage. Resulting in poor coverage and a residue left on surfaces.

You May Like: How To Clean Black Mould From Pavers

Longray Basic Ulv Fogger With Adjustable Flow & Flex

This was the first fogger I ever tried and have to say itis one of the best delivery systems I have found for the EC3 Mold SolutionConcentrate. The Longray BasicULV Fogger is designed to be picked up and carriedaround for manual, directed spraying. The bottom of the unit is agenerously-sized, detachable solution tank with an easy-fill valve and acapacity scale. The top of the unit is molded into a grip handle so you can takeyour fogger anywhere.

It is a genuine fogger. Foggers competing in this pricerange are often mislabeled misters. WHO guidelines define a particle finer than100 microns as mist, and finer than 50 microns as fog. The Longray Basic is agenuine fogger, producing a 5-50 micron fog that diffuses faster, penetratesbetter, and has a higher probability of coming into contact with smallparticles like mold spores and mycotoxins.

The units vortex nozzle is designed to be clog-resistantand after using it for 2 years now, I have never experienced any issues withit.

What I Like About The Longray Basic ULV Fogger

  • It is very lightweight and easy to move around.
  • The mist settings are perfect. There is a setting forevery area I need to get to.
  • It is one of the more affordable mold foggers.
  • The nozzle never clogs.
  • You can useany mold control solution in it.

Any Cons?

Recent Reviews From Amazon

You can purchase the . It is usually under $200.00.

Biocide Mold Bomb Fogger

The 3rd mold fogger we are going to recommend is a little different, it is called the BioCide Mold Bomb Fogger.

The Mold Bomb is a little different in the way that the product itself is single use and contains the delivery method and the mold killing agent.

It works in a way that is very similar to the fogger mentioned above:

  • Place the mold bomb in the center of the affected area or near the mold infestation
  • Remove the cap and push the trigger down until it locks into place
  • Leave the area for 2 hours
  • Thats it!

    BioCide advertise that the mold bomb itself kills 99.9% of all mold, mildew and bacteria. It even kills the dreaded black mold.

    Customers report that the mold bomb fogger works wonders it kills all traces of mold and even gets rid of the distinctive smell that mold can leave behind.

    Don’t Miss: Wet Mold Leather Holster

    What Is Propylene Glycol Is It Safe

    Propylene Glycol is a viscous, colorless liquid, which is nearly odorless and possesses a faintly sweet taste. It belongs to alcohol groups of substances however, it should not be mistaken for ethylene glycol . It is very mixable with a broad range of solvents, including water. In general, glycols are non-irritating, have very low volatility and very low toxicity.

    Propylene glycol is also used in various edible items such as coffee-based drinks, sweeteners, and soda. It is a thickener for ice cream, whipped dairy products and doughs. It is used in lotions to prevent the skin from drying and as a carrier in alcohol-based hand sanitizers. Propylene glycol is also used as a solvent in many pharmaceuticals, including oral, injectable, and topical formulations.

    Most fog machines use a propylene glycol mixture to produce special effects . Many commercial smoke machines use fog juice that consists of food grade propylene glycol with varying amounts of distilled water. The glycols are heated and forced into the atmosphere under pressure to create a fog or haze. Inhalation safety has been demonstrated over 70 years of use in commercial and entertainment activities.

    What Makes Us Different

    10 Steps for Dry Fog Mold Removal Treatment
    Our dry fogging technology is what makes us so unique apart from the competition. Also we take a full remediation approach instead of only focusing on the visual mold. Getting rid of the all the mold in your home, not just the mold you can see is our goa. it doesnt always take destroying it with extensive demo either. Dry fog will allow each and every mold cell to be completely destroyed. With our dry fogging technology, our micron particles are able to bounce around the walls and rooms of your home for several minutes before dissipating. Dry fogging does not allow any part of your home to get wet or damaged, aside from killing mold!

    Don’t Miss: How To Remove Mold From Pavers

    The Benefits Of Dry Fog Mould Removal Vs Traditional Means

    Mold is never a welcome discovery in your home, especially when it can cause health complications and costly repairs. Removing mold quickly is essential, which is where Dry Fog removal is so beneficial. Its fast, thorough and less invasive to your home than traditional means.

    EnviroFog Solutions in Calgary is a professional mold inspections and removal company. EnviroFog is happy to share what makes their patented Dry Fog removal technique so much more effective in giving families a true mold-free environment.

    Signs of Mold

    Catching mold early on is a critical step in preventing the issue from worsening or spreading throughout your home. Generally, mold likes to grow in damp and dark areas like in bathrooms, around windows or near a leaking pipe. Unless you can visually see a spot of mold, early signs will be a musty, earthy smell or warping or peeling paint on walls. If there is visible staining or discolouring this is due to water damage which translates into mold if not discovered within 48 hours of the initial leak.

    Other signs could be health-related, like eye irritation, sore throat, skin rash or lung irritation unrelated to a cold or another known illness. Always leave the inspection to a trained and experienced professional and who can handle the removal.

    Traditional Mold Removal

    Dry Fog Mold Removal

    Patented Dry Fog Technology

    AirPURE is uniquely different from traditional mold removal service companies. We use a patented dry-fog technology that safely gets rid of bacteria, germs, and fungi by penetrating every nook and cranny of your home or business in just hours.

    Our dual dry fogging process is non-toxic, family safe, and pet friendly. The patented formula is registered with the EPA, and has gone through rigorous testing, which makes it eco-friendly while being a great solution for mold removal.

    Don’t Miss: Remove Mold From Cutting Board

    The Ultimate Mold Foggers Guide

    If you have ever had a mold outbreak in your house then you probably know that the mold you can see is only the beginning of the problem. Believe it or not, only 10% of mold is visible the other 90% is microscopic. On top of this, there is usually even more mold behind the scenes in the roof space, wall spaces, heating and cooling ducts and many other places that are inaccessible.

    This is where a mold fogger such as the Concrobium fogger can make your life so much easier and have the mold problem under control in record time.

    Disclosure: As an Amazon Associate I earn from qualifying purchases. However, this does not impact our reviews and comparisons. All opinions are our own we pride ourselves on keeping our articles fair and balanced. For more info see our disclosure statement.

    Powered By Our Two Step Advanced Dry Fog Technology

    Concrobium Fogger Instructional Video

    Our proprietary mold removal process uses a two-step system to create a safe, non-toxic cloud that fills and penetrates every critical surface in your home, commercial, or industrial space. This dry cloud is comprised of microscopic particles that kill everything from black mold and fungi to bacteria and viruses on contactwithout leaving any wet residue. After treatment, youll pass a mold test, no problem.

    Step 1 InstaPURE

    First, we apply a Dry Fog of InstaPURE to all areas of the home or office. InstaPURE is an EPA-approved sterilant that instantly denatures and safely kills ALL mold spores, fungi, bacteria, and viruses with which it comes into contact. The InstaPURE Dry Fog disburses billions of 0.75 micron disinfectant particles, which permeate the hardest to reach places without damaging any surfaces. And although InstaPURE is instantly deadly to all molds and pathogens, including the Coronavirus, it is FDA-approved as safe for food contact.

    Step 2 EverPURE

    Once we eliminate all the mold and pathogens present in your home or property, we lay down a microbiological barrier called EverPURE. EverPURE prevents against future mold growth and pathogen. This advanced technology provides long-term mold protection and allows us to give a warranty that no other mold company will or even can offer.

    Don’t Miss: How To Remove Mold From Wooden Cutting Board

    Get A Quote On Dry Fog Mold Removal Remediation Services Today

    At Titan Dry Fogging we will perform mold inspection services, locate eerie mold infestation thats visible, and thats lurking in hidden places, and we will use our dry fogging technology to sterilize your entire living space, killing every last mold spore. In fact, cold sterilization dry fogging not only eliminates mold, it also kills COVID-19 and truly turns any dwelling into a clean room. Call today for a free assessment and quote, and allow our partnership to work for you, your family, and employees to ensure a safe and healthy atmosphere thats mold free.


    About Us

    Located in West Palm Beach County, FL, our company has proudly been in business for more than five years. We have always believed that attending to our clients needs and concerns is paramount to our success ever since.


    What Is A Mold Fogger

    A mold fogger is a device that turns mold remedial solutions from liquid to fog. While one could put such mold-killing solutions into spray bottles and mist the affected areas, foggers are more effective.

    A mold fogger by turning mold killing solutions into vapors evenly distributes the solution. As such, it covers every single inch of the room, including the cracks and crevices we cannot reach manually.

    It works by using heat to vaporize the liquid solution, which fills the room with a thick fog. Or by what is called cold fogging, which simply uses air pressure to vaporize the solution.

    The solution will kill mold and mold spores that you cant see. Damaged material then needs to be removed afterward to prevent the mold from returning.

    You May Like: Black Mold On Cutting Board

    What Sets Us Apart

    • Dry Fog Technology

      Dry Fog technology is what sets Pure Maintenance of New England apart from from other mold remediation options. Tiny particles of a dry fog fill the capacity of your home or office, destroying all mold cells and germs on any surface the air touches in the space. The patented micron particle is so small that it continues to bounce around the room for several minutes before finally dissipating denaturing any mold or bacteria and germs present.

    • Safety

      The process is safe, non-toxic and leaves no residue.

    • Verification

      We provide value-added follow-up ATP testing and documentation for additional peace of mind.

    • Our Guarantee

      We provide a certificate of application of a 90-day anti-microbial protection for pathogen removal treatment services and a 1-year guarantee for mold treatment services.

    *Pre-cleaning is required before any dry-fogging treatments. POST TREATMENT Surface cleaning to remove particulate should remain a best practice in your building space.

    Why Should You Use A Mold Fogger

    Pure Maintenance -Mold Killing w/Dry Fog Technology

    When you finally notice mold growth anywhere, sadly, its only the tip of the iceberg. Mold spores are microscopic, which means that you dont see them.

    Also, since mold spores are in the air, using a spray bottle is ineffective. It will definitely not kill them all.

    To exterminate them, therefore, you must evenly distribute the mold-killing solution. This ensures that it fills the room, including the air where mold spores might be.

    Recommended Reading: How To Clean Mold From Boat Seats

    We Service The Greater Orlando Area Including Seminole Orange & Lake Counties

    Our customers can be found from Southchase all along Florida’s Turnpike up through Gotha to Winter Garden, FL . The Orlando team spends most of its time in downtown Orlando and along interstate highway 4 This includes College Park closer to Orlando, then Winter Park, and north up towards Altamonte Springs. Out west we service Paradise Heights, Apopka and its surrounding neighborhoods. Along the east side of Orlando, we service customers in Oviedo along route 417 to Azalea Park.

    We have a team of mold remediation specialists in Daytona Beach that services Volusia and Flagler counties, from Palm Coast, FL to New Smyrna Beach. This area also includes Deland and Deltona to the west. For those that live in the greater Jacksonville including Ponte Vedra, Atlantic Beach and Amelia Island, and the surrounding area, we have a separate team of mold remediation specialists in Jacksonville that will take good care of you.

    Clients that periodically want to dry fog their homes, once or twice a year, to ensure there is no mold growth, can do so at any of these locations.

    If your home or business workplace is not found on the map above, give us a call or fill out the form at the link below. The rule-of-thumb is if you live in Orange County or Seminole County there is a good chance our team can take care of your needs. Given your situation, we may be able to make the drive and if not, we have other locations throughout Florida that we can refer you to.

    Mold Removal Service From Pure Air

    Pure Air is the most affordable and most effective mold removal company in Utah. Using a patented two-step system, Pure Air has managed to perfect the dry fog process to rid your home of mold forever. Pure Air can tackle even the most difficult mold problems in only a few hours. Dry fog technology is not only quicker and more effective than old outdated remediation methods, but it also saves you money. If you have an old home taken over by mold, or a small problem behind a wall, Pure Air has the solution.

    You may have high mold counts in your home and not even know it. Mold can grow behind walls, in washing machines, under cupboards and can even be clear after being washed with bleach but can still be very dangerous. If you have felt sick in your home or have had a water leak, call Pure Air to receive an evaluation by a certified mold inspector.

    You May Like: How To Clean Mold From Boat Seats

    The Physical Or Mechanical Challenge Of Remediating Airborne Mold

    To completely remediate a home, mold must be removed from building materials as well as the breathable air. Decaying materials cannot be salvaged and must be removed all together. The near impossible challenge is that in order to clean mold, it must be disturbed during the removal process. When this occurs, airborne molds have the ability to contaminate other rooms in homes and possibly the HVAC system. Professional remediators will often have to completely seal portions of the home and HVAC systems using specifically installed taped-down plastic sheets. They also either create negative pressure within the contained area funneling exhaust outside the home, or filter the air through a HEPA air scrubber. Air scrubbers can only clean what goes through the HEPA filter, so disturbing mold while removing spores will not remove all spores. It is for this reason that we suggest hot fogging a home after remediation to polish areas in which all spores could not be removed, as well as to treat hidden mold sources that were not found during remediation.

    Over the years, the use of fogging has been both studied and practiced in a variety of efforts.

    Popular Articles
    Related news