Friday, November 18, 2022

How To Clean Mold Out Of Toilet Bowl

Best Way To Remove Mold From Your Toilet Tank

How To Clean Mold out of a Toilet (HowToLou.com)

A thorough solution to cleaning black spots from the toilets tank is to pour distilled vinegar into the tank and allow it to sit for about 20 minutes. Then flush the toilet a few times. Avoid using bleach in the tank as it is corrosive to some parts. If the problem persists, use a brush to scrub at the black mold when the water is down after flushing. Repeat until it is clean.

How To Clean Stubborn Stains Using Toilet Bowl Cleaner

There are hundreds of toilet cleaning products that can be used to clean stains off your toilets. Several household commodities can be almost as effective and will rid your toilet bowl of the dreaded ring without strong chemicals. Baking soda and vinegar, as explained above, can be viable alternatives for commercial toilet cleaners.

Bleach should not be used as a standalone solution because it merely whitens up the stains and not removes them. You should only use bleach with other toilet cleaning products.

How To Keep Mold From Returning

No matter how diligent you are about removing visible mold, if you donât address the underlying issue, it will come back. Where theres mold, theres moisture, says Larry Zarker, CEO of the Building Performance Institute, which trains and certifies professionals who specialize in creating healthy, safe and efficient homes. Here are some common mold hangouts in homes, along with ways to eliminate their moisture source.

Also Check: How To Get Rid Of Mold Bathroom Ceiling

Don’t Miss: How To Get Rid Of Airborne Mold

Vinegar And Baking Soda Scrub

If you don’t have 12 hours to wait for your porcelain goddess, then you can give this quicker method a try. Grab the Dawn, vinegar and baking soda.

  • Drain the water out of the tank.
  • Add 2 tablespoons of Dawn, a cup of vinegar and ½ cup of baking soda.
  • Use the toilet brush to swish it around.
  • Scrub down the sides and bottom.
  • Let it sit for about an hour.
  • Give it another good scrub to get any new stuck-on sediment, algae, rust, and mold.
  • Turn on the water and flush out the tank.
  • Enjoy your clean and fresh smelling tank.
  • Throw the lid on, gently, and you are good to go.
  • How To Remove Mold From Toilet Bowl Tank And Seat

    No More Stubborn Rings On Your Toilet Bowl With This Eco

    At some point, black mold in toilet happens to everyone. You lift the lid on a toilet bowl only to be greeted by a ring of black mold. It could be in your home or in a friends. You stare at it, wondering if you want to do your business, after all. You question if its even safe to squat down. If youre at a friends house you have to deal with it, maybe by using excessive amounts of toilet paper. But if youre at home, this is your wake-up call. You have to handle the problem and fast. In addition to its unsightly appearance, toilet mold can be potentially hazardous to your health, especially if you have allergies or are exposed to it for long periods of time.

    Don’t Miss: How To Get Rid Of Mold On The Bathroom Ceiling

    What Is Black Mold In Your Toilet

    Before we show you how to fend it off, its important to understand what toilet mold really is. Its a discoloration indicating that you have mildew and fungus in your toilet.

    Although mainly black, it can also be green or orange. You shouldnt confuse black mold with brown water in the toilet because they dont share the same source.

    Dampness in your toilet sets the breeding ground for mold spores and fungi, especially when you pair it with darkness and warmth. Your bathroom is the best place for forming black mold, along with sink drains, showerheads, curtains, etc.

    Black Mold In Toilet Bowl Diabetes

    Theres no direct link between mold and diabetes. It, therefore, means mold doesnt cause diabetes. However black mold could highlight certain symptoms of diabetes in your body.

    Well, mold is known to thrive in sugar, when one is suffering from diabetes, the body doesnt adequately hold on to enough glucose but rather releases it through urine.

    Hence, when you notice a reoccurrence of mold in your toilet with all other factors constant, it could mean your urine contains too much sugar meaning you may be suffering from diabetes even without your knowledge.

    The link then appears in that mold infestation could be a major indication of your blood sugar levels in sweat and urine, warranting the need for a checkup.

    Read Also: Clean Mold Bathroom Ceiling

    Tips To Keep Under The Toilet Bowl Rim Dirt Free

    Following are tips to prevent buildupof dirt under the rim and other parts of your toilet.

    • Clean regularly, at least once a week to prevent the accumulation of heavy stains
    • Ensure theres enough ventilation in your bathroom to avoid dampness.
    • If your toilet bowl is old, damaged, or worn, make a point of replacing it since worn and damaged surfaces make it easier for stains and debris to build up.
    • Another tip from users around the internet is to leave the toilet lid up. Mold is known to develop when there is too much moisture build-up over extended periods. The toilet lid traps sufficient moistures under it and at the same time enough of the same moisture to evaporate from the bowl

    Further Reading

    Ec3 Laundry Additive Method

    How to Remove Toilet Mold that Keeps Coming Back | LITTLE KNOWN HACK

    Laundry additive in a toilet? Sounds weird I know. You could use EC3 mold solution concentrate. That works just as well. But I like the laundry additive because it is meant to withstand agitation in the washing machine as well as a high volume of water.

  • Fill a small spray bottle with EC3 laundry additive.
  • Pour 1/2 cup of EC3 laundry additive into the toilet.
  • Spray the EC3 under the rim.
  • Let the laundry additive sit in the toilet for an hour or more with the lid closed.
  • After an hour, scrub the mold with a toilet brush or similar non-abrasive material. You want to move the water around the bowl and brush really well under the rim.
  • Let the toilet sit again for about 15 minutes with the lid closed.
  • Flush the toilet.
  • Still see some mold? Scrub any remaining mold stains with a toilet brush or similar non-abrasive material.
  • Still see some mold? Repeat this entire process a second time.
  • After you are mold free, let the toilet sit with the lid closed for 3-5 hours before using it again.
  • To learn why I love the EC3 product line so much as well as HOW it works to kill both mold and mycotoxins, check out this detailed post about EC3.

    Don’t Miss: How Do You Remove Mildew From Leather

    Contact Your Local Puroclean Office For Mold Remediation Services

    We recommend that mold remediation and cleanup should be handled by professionals whenever possible. PuroClean specializes in mold removal and cleanup, as well as remediation of the source of mold odor to return your home or business to its pre-loss condition. Mold remediation may be a time-consuming process, and PuroClean has the knowledge and technology needed for the job. Give us a call 24/7 at 1-800-775-7876, or head to our website to get connected with your local office immediately.

    Tips To Prevent Mold From Growing In The Toilet Toilet Tank And Walls

    If you have a bathroom window, open it during showering.

    Make sure that you are using your exhaust fans when you take a shower or bath and leaving them on for at least 30 minutes after you finish.

    If your bathroom is prone to higher humidity, grab one of these recommended bathroom dehumidifiers and use it during and for an hour after you shower or take a bath.

    Never leave waste sitting in the toilet.

    Clean your toilet bowl once or twice weekly using a scrub brush and the EC3 Mold Solution Concentrate or Vinegar.

    Add 1 cup of vinegar to the toilet tank a few times a week to help prevent the mold.

    For toilets that are not used often, be sure to flush them every other day.

    Fix any bathroom leaks immediately.

    Also Check: How To Clean Mold From Shower Ceiling

    Is Toilet Mold Dangerous

    The black mold growing in the tank, behind it, and under the toilet bowl can be a hazard to anyone, healthy or unhealthy. According to health experts, exposure to mold can lead to a stuffy nose, wheezing, red or itchy eyes and skin, hay fever and shortness of breath.

    It is worse especially for individuals who are allergic to spores. It is recommended that you have safety measures put in place so as not to encourage its growth. You could put on a respirator so that the spores from the mold dont trigger allergic reactions as you clean.

    Why Is There Black Stuff In Toilet After Flushing

    Toilet mold

    If you notice black stuff after flushing your toilet it means that either the pipes that supply water to your house have some rust or leaks. The leaks and rust harbor black mold that is then transferred to your toilet tank.

    At the same time, black stuff could indicate an issue with the water itself. The water may be dirty, with mineral deposits or some unidentified residue that is black.

    Recommended Reading: Mold Or Mildew On Bathroom Ceiling

    Clorox Toiletwand Disposable Toilet Cleaning System

    The Clorox cleaning system comprises of a toilet wand, a storage caddy and original disposable refills plus 10 Rainforest rush scented refills that kill 99.9% of bacteria and viruses in your bowl.

    The hexagon shaped sponge heads clean in hard-to-reach places under the bowl rim and drain for a deeper and faster clean to remove rust, calcium and lime stains.

    It is an all-in-one bathroom household cleaner. No need for scrubbing brushes and other cleaning items.

    Health Risk Of Black Mold

    Mold is gross to look at but what is the real risk? It turns out that mildew and mold growth in the bathroom does not pose a serious health crisis unless the mold spores begin to spreadthrough the rest of the house.

    Some types of mold become a danger when allowed to spread on surfaces with cellulose, which is found in wood and wood-derived materials such as paper and fiberboard.

    If the mold penetrates the walls, floorboards, and rafters, the toxic mold may develop.

    In bathrooms, the mold is more likely to cause minor respiratory issues in some individuals. Potential symptoms include:

    • Itchy eyes
    • Rashes
    • Skin irritation

    During a severe reaction, you may also find it difficult to take deep breaths. If you detect these signs, remove mold and consider having your property inspected for the spread of moldthrough other areas.

    While mold is rarely a danger, remove it before it has the chance to spread. It can easily travel through air ducts and settle in rooms throughout the house.

    Don’t Miss: How To Get Mold Off The Ceiling

    What Causes Black Mold In A Toilet Bowl

    First, we need to understand that mold is a fungus. Mold and mildew thrive in dark and humid areas . Black mold can be found in your toilet bowl or tank when you have been away for even a few short days on vacation. It can also happen if there has been waste left in the bowl for a while.

    Since humidity and dark places are where mold thrives, your toilet bowl and tank are a prime breeding ground for it. Bathrooms are generally a big mold spot if you dont have proper ventilation. It is common to see this type of mold when you are cleaning a hoarders house in our experience.

    Prepare The Toilet And Manage Stains

    Removing mold from bathtub using toilet bowl cleaner

    First, you need to remove water from the toilet bowl to achieve excellent results.

    To do this, you can simply use a toilet plunger or brush to push the water down and make the bowl empty.

    Wear your rubber gloves and flip up the toilet seat. Next, apply your toilet cleaner around the rim and on the sides of the toilet bowl. Generally, a bleach-based cleaner such as Domestos Thick Bleach works great at tackling germs and dirt. However, if your toilet bowl is engulfed in limescale stains, you should choose a cleaning solution with limescale-fighting abilities. Be sure to follow the user instructions on the product label.

    After applying the cleaner, scrub the toilet bowl with a toilet brush, making sure the cleaner reaches every nook and cranny of your toilet, including the u-bend. Leave the toilet cleaner to settle and get to work for about 30 minutes. As you wait, you can put your feet up and get a few sips of your favorite beverage or clean other areas of your bathroom, such as vanities, bathtubs, and showerheads.

    You May Like: Uv Lights To Remove Mold

    How To Prevent Mold Growth In The Toilet

    For peace of mind over mold in your toilet, preventing the spores from spreading is the ideal thing you should do. The following tips will help you prevent mold growth in your toilet.

    • If your toilet has a window, always open it for ventilation or leave your exhaust fans to refresh the air after using the toilet.
    • Always flush and avoid leaving waste sitting in your toilet.
    • Do a thorough toilet cleaning at least once a week.
    • Add vinegar to your toilet tank two to three times a week.
    • Infrequently used toilets should be flushed at least every other day.

    Tankless Style With High

    In 1906, William Sloan first made available his “flushometer” style toilet flush valve, incorporating his patented design. The design proved to be very popular and efficient and remains so to this day. Flushometer toilet flush valves are still often installed in commercial restrooms, and are frequently used for both toilets and urinals. Since they have no tank, they have no fill delay and can be used again immediately. They can be easily identified by their distinctive chrome pipe-work, and by the absence of a toilet tank or cistern, wherever they are employed.

    Some flushometer models require the user to either depress a lever or press a button, which in turn opens a flush valve allowing mains-pressure water to flow directly into the toilet bowl or urinal. Other flushometer models are electronically triggered, using an infrared sensor to initiate the flushing process. Typically, on electronically triggered models, an override button is provided in case the user wishes to manually trigger flushing earlier. Some electronically triggered models also incorporate a true mechanical manual override which can be used in the event of the failure of the electronic system. In retrofit installations, a self-contained battery-powered or hard-wired unit can be added to an existing manual flushometer to flush automatically when a user departs.

    Recommended Reading: How To Clean Mildew From Leather

    Alternative Cleanerswhen Everything Fails

    If the above DIY methods fail to work, you can try commercially available cleaners that are specifically formulated to clean toilet bowl stains.

    Note that some of these products may end up damaging your toiletthey are not meant for all types of toilet bowl surfaces. Be sure to go through the manufacturers instructions before use.

    The Best Way To Remove Mold From The Toilet Bowl

    Get Rid of the Lime Scale Ring in the Toilet Bowl

    Steam clean it! Yes, you read that right! Bust out your handheld steam cleaner and steam the mold right out of your toilet. Heres how to do it.

  • Place the angle nozzle attachment on the hose of your steam cleaner. This is the steam cleaner I use.
  • Steam the toilet bowl and underneath the rim at high pressure to loosen the stains.
  • Direct more steam on the hinges and the toilet seat edges to loosen rust on screws.
  • Using the stream setting on a spray bottle filled with vinegar, wash off the loosened dirt into the toilet bowl.
  • Flush the toilet.
  • If you still see mold, repeat this process a second time.
  • When all the toilet mold is removed, wipe off any remaining drops of water or steam with a microfiber cloth.
  • Yep it is just that easy!

    Recommended Reading: Remove Mold From Shower Ceiling

    How To Clean Toilet Bowl A Step By Step Guide

    Cleaning a toilet bowl can be an exhausting process, especially if it has been unused for an extended period. However, it is a task that has to be done. A dirty toilet bowl harbors harmful bacteria and ugly mineral or soil build-up. Regular cleaning can help eliminate this.

    The general toilet cleaning supplies include rubber gloves, bleach, water, disinfectant spray, pumice stone, toilet cleaner solution, toilet brush, vinegar or baking soda, scrub sponge, and paper towels.

    Always wear rubber gloves to protect your skin from bacteria and the chemicals in the cleaning agents. You should also be sure to disinfect them after usage. Always check the user instructions before using any toilet cleaners. Some materials require adequate care when mixing with other substances.

    Serratia Marcescens Toilet Cleaning

    To clean the bacteria from a toilet, start by disinfecting the bowl. Add ¼ cup of chlorine bleach to the bowl and scrub off all visible infection with the toilet brush. If you need to scrub an area, Bob Vila.com recommends using a mixture of baking soda and dish detergent to scrub away all visible pink mold then rinse it thoroughly with water before washing down the entire surface with a bleach-and-water mixture.

    Add an additional ¼ cup of bleach to the tank and allow both tank and bowl to sit for about 20 minutes. After time is up, flush the system a few times to clear out the toilet and run the bleach through the pipes. Be sure to wipe down the toilet rim, seat and lid with a bleach mixture or a disinfectant wipe as well.

    This bleach-and-water mixture can also be used in a spray bottle to soak areas outside the toilet like the walls of a shower or grout on the floor. Leave the bleach mixture to react for about 10 minutes then rinse with clean water. Preventative cleaning will help you stay ahead of this bacterial growth. Be sure to use appropriate products on a regular schedule and take action to reduce overall humidity in the bathroom.

    Things You Will Need

    • Disinfect your toilet bowl and tank weekly or at the first signs of pink mold.

    Warnings

    • Do not leave bleach in the tank for longer than 20 minutes. It can damage the rubber valves and seals inside.

    Writer Bio

    Also Check: How To Get Rid Of Mold On The Ceiling

    Popular Articles
    Related news