Tips To Remove Mold From The Bathroom Ceiling
- Direct a UV lamp at the affected area for 24 hours after you have eliminated the mold. It will kill off any stubborn spores clinging to areas you may have overlooked, as well as remove leftover moisture.
- Fans can be used to circulate the air and rid the room of any odors from the cleaners or mold.
- Inspect exterior bathroom walls to ensure thereâs no mold growing on the outside wall.
- Never combine bleach and vinegar because it transforms into Chlorine Gas, which is fatal in high concentrations.
Preventing Mold With Dehumidifiers
A sink pipe and drain are common areas for mold to spread because of the intensive moisture. Dehumidifiers are an excellent technique to remove excess moisture from your indoor spaces.
If you utilize these devices on a daily basis, youll reduce your chances of getting a significant mold problem. They can be used in a variety of locations, such as the basement, kitchen, and bathroom.
Dealing With Mold Growing In Your Chicago Bathroom We Can Help
As the citys most experienced black mold removal company, we know the fungus can take hold anywhere. When it happens in your bathroom, follow our guidelines, but always be careful.
If you decide the cleanup job is too big or risky, please dont take any chances. We offer certified mold remediation services across Chicago and the suburbs, so give us a call.
You can always trust ServiceMaster Restoration by Zaba to help you keep your home fresh, clean and healthy.
Give us a call for help with black mold removal: 773-647-1985
Recommended Reading: Cleaning Mold Off Bathroom Ceiling
How To Get Rid Of Mold In Bathroom Swiftly
Here are some tested and proven tips that can successfully make your bathroom mold-free:
1. Use Vinegar
Vinegar has over the years proven to be one of the most effective cleaning solutions for mold. Researches show that it is an effective killer of 82% of all mold species. Thus, if you use it appropriately, it will assist you in getting rid of mold in your bathroom.
This is a step-by-step guide on how to use vinegar to effectively get rid of mold that is growing and constituting a nuisance in your bathroom:
- Get a spray bottle and pour some mild white vinegar into it. Leave the vinegar in its concentrated state without diluting it with water. Vinegar is naturally acidic, and that explains why it is an effective anti-mold agent. Diluting it will water down its effectiveness and defeat the purpose of using the cleaning agent.
- Spray the affected areas with the vinegar and then wait for about an hour. Then, open your bathroom windows to let the vinegar smell go out and allow fresh air to come in.
- After the expiration of an hour, wipe the cleaned area completely clean with hot water and a towel. Make sure that you wipe the cleaned are dry as a preventive measure against the mold growing back again.
You can keep a bottle of the spray handy for use on surfaces that seem prone to mold. That will prevent them from growing and reduce the need to remove mold from time to time.
2. Bleach and Baking Soda
How Dangerous Is Mold In Your Bathroom
Mold in the bathroom is a hazardous problem that should be addressed as soon as possible. Mold is infamous for producing spores that, when inhaled, can cause anything from rashes to headaches to respiratory problems. At-risk groups such as the very young or old and people with compromised immune systems, mold sensitivities and allergies, or asthma can have severe reactions to mold.
Bathroom mold occurs primarily because of high humidity levels and poor ventilation. This creates an environment ripe for mold spores to grow and reproduce. Mold loves damp areas, and bathrooms are some of the dampest if not the dampest areas in your house. The bathroom ceiling, bathroom walls, shower tiles, grout, shower curtains, and the vents of exhaust fans are the most common locations for mold to accumulate because of the moisture that accumulates on or near them.
Mold comes in a variety of colors. For example, Stachybotrys, a black mold, is notorious for being highly poisonous. Nonetheless, it doesnt matter what type of mold youre dealing withall molds found within the house carry the risk of health issues. Exposure at any time puts you at risk for respiratory ailments, headaches, skin irritation, and more. For these reasons, we recommend that you move to eliminate the mold in your bathroom as quickly as possible.
You May Like: How To Clean Mold Around Air Vents
Moisture & Mold Damage To Floor Beneath The Toilet Tank
If condensation is severe, water will drip from the holding tank and saturate the floor. The level of damage, if any, depends entirely on the flooring material. Well sealed tile will withstand constant water exposure. Hardwood or laminate flooring will fail relatively quickly.
Mold Under Toilet
Mold Under Toilet on Flooring
Contact Puroclean For Professional Mold Remediation Services
Mold issues can pose a challenge to homeowners, but thankfully, you dont need to go about it alone. As The Paramedics of Property Damage®, PuroClean is ready to assist you with professional mold mitigation services. Our technicians have extensive training in the most effective strategies to get rid of mold safely and efficiently. So if you spot mold in your bathroom or anywhere on your property, contact your local PuroClean office immediately. Our office locator can get you easily connected, or call us at .
Recommended Reading: How To Remove Black Mold From Ceiling
How Do I Get Rid Of Mold In My Bathroom
How do i get rid of mold in my bathroom? Combine 1 part bleach with 2 parts water in a spray bottle and spritz the affected area. Let the solution sit for 10 minutes. The mold should start to fade away on its own, but if areas of stubborn mold remain, use a coarse brush or old toothbrush to scrub the mold away.
Is mold in the bathroom harmful? For some, it can irritate allergies and asthma. Mold is relatively harmless, but given the right circumstances it can definitely cause some irritation, Tolliver said. People who are affected by bathroom mold will most likely experience runny noses, coughing and scratchy throats.
What kills mold on bathroom walls? Mix one part bleach with three parts water in a bucket. Using a scrub brush or heavy-duty sponge, vigorously scrub the mold-affected wall with the bleach/water solution until the mold spots have disappeared.
Why does mold keep coming back in my bathroom? The major reason why molds keep coming back after being removed is excess moisture and failure to cut off all favorable conditions for their growth. Replace old windows that let in moisture and make sure professionals seal your leaky pipes.
How To Get Rid Of Black Mold In Shower Grout
I also previously wrote a post about the best way to clean grout by using and comparing Magic Eraser on grout, baking soda to clean grout, and a steam cleaner for grout. They all worked fairly well!
I didnt at the time have black mold growing in my shower grout though.
One of the best things you can do when battling black mold in shower grout is to replace the grout completely and re-grout. Mold often seems to grow on grout as it starts to age and crack as it is porous.
No, this is likely not an easy or cheap process, but this will ensure the grout is indeed mold-free. Just be sure to use top-quality grout!
Plus, you may also discover a water issue behind the tile or grout that you can better address so as to prevent it from growing again.
But, if your grout still looks like its in good shape, then try one of the following methods:
Once you remove black from shower grout, be sure to use a squeegee to remove excess moisture and water from your tiles and grout after showering to prevent it from coming back.
You May Like: How To Clean Mold Spots Off Bathroom Ceiling
Mold On The Underside Of The Toilet Tank
Occasionally, toilets will suffer from condensation on the back and bottom side of the tank. The vast majority of toilets are constructed from porcelain, a durable, non-staining, non-porous material. These qualities not only make the material perfect for handling lifes biological unpleasantries, they also make the material highly resistant to mold growth. Due to this, mold growth on toilets is unusual.
For growth to occur, it must find another food source settled dust. Often invisible to the naked eye, a thin layer of dust settles upon every surface of a home, including vertical and even inverted surfaces. This microscopic layer of dust provides sufficient organic material to propagate mold growth.
Remember, mold growth requires both a food source and available moisture. Just because the settled dust has provided a food source does not necessarily mean that mold growth will inevitably follow. Moisture must be present as well. On a toilet this primarily occurs through condensation. When the shower is used, warm, humid air is introduced into the environment. This moisture laden air hits the cold toilet and condenses. If the condensation is severe, drips will form and damage the floor below.
Address Any Water Issues
Water can be the big culprit behind that nasty smell. You can get a mildew smell if you have a slow drain leak under a sink or around a drain, says Frazier. He says the same thing can happen with toilets if a wax ring seal, which seals the toilet to the flange, has a slight leak that is allowing small amounts of water to seep out under the toilet.
The fix is to repair the leak promptly and wipe the area that got wet down with a strong, bleach-based cleaner, Frazier says.
Bathtubs can also occasionally get a mildew smell if theyre not properly sealed and if small amounts of water get between the wall and the tub. A bleaching solution can scrub away mildew on top of caulk, but if its underneath, it will need to be completely removed and properly recaulked.
Recommended Reading: Remove Mildew From Leather
How Should I Stay Safe When Removing Mould
If you are trying to remove mould yourself, there are certain safety precautions you should take.
Protect yourself from spores with eyewear, long rubber gloves and a mask that covers your nose and mouth. Remember to open the windows for ventilation and keep doors closed to prevent spores from spreading to other parts of your home.
As previously mentioned, do not try to remove any mould that’s been caused by sewage or contaminated water.
Put any clothing youve worn while cleaning straight into a bucket with warm water and some mild detergent to hand-wash them.
Any rags, cloths or sponges youve used should be put into a plastic bag and thrown away.
How To Clean Black Mold In Shower Ceiling
Like all of the other molds, you again need to fix the cause of the mold , before you tackle the mold itself or youll just have to do it again soon!
If it is on porous materials like a popcorn ceiling, wood, drywall, and so on, youll need to remove that portion of the ceiling and replace it.
If it isnt severe, and your ceiling is made of a non-porous material, and you are looking to remove the black mold in shower ceiling, youll want to:
Don’t Miss: Black Mold On Ceiling In Bathroom
How To Clean A Black Mold Shower Curtain
I am going to state the obvious and tell you that a simple way to get rid of black mold on a shower curtain is to just get rid of the shower curtain and buy a new one! They are not very expensive usually and ensure there is no more mold in your shower.But, if you dont like to replace items , cant afford to do so, or like a cleaning challenge, then there are some tutorials for removing black mold from shower curtains. Weve been able to remove some pink and black mold from our shower curtains through the years and it isnt all that difficult.
If you have a plastic or vinyl shower curtain liner, simply use a baking soda and water mixture and gently scrub it off then rinse with water. Then you can spray some vinegar on it to help inhibit more growth and remove any watermarks.
If you have a cloth or fabric shower curtain or shower liner, you will do something similar. I suggest heading to this post or this post for a good tutorial on how to do it indoors and outdoors
Lastly, you can throw your shower curtain into the washing machine with some laundry detergent and 1/2 cup baking soda , run on the gentle cycle . Or Ive done it with just a straight vinegar wash before too.
What Is Black Mould And Why Does It Form
Mould is a fungus that grows in damp, warm conditions, such as a bathroom, where there is very little airflow. It can start as mildew, a white form of fungus found on a flat surface.
The growth of black mould on bathroom walls and ceilings is due to excess moisture, which may start with condensation building up over time following a shower or bath. The warm, moist air meets a cold surface and clings to it, like windows.
Mould can build-up for many reasons, apart from a lack of ventilation in your bathroom these include leaking pipes, poor insulation or if condensation has not been removed following a shower.
You May Like: How To Remove Black Mold From Bathroom Ceiling
Tips For Treating Mildew With White Vinegar And Baking Soda
Luckily, treating mildew with some common household items is normally a pretty quick and easy task. If youve noticed mildew in your bathroom, you can typically get rid of it using some white vinegar and baking soda. To do this, fill a spray bottle with white vinegar, spray the areas that are covered with mildew and let the white vinegar sit for a few hours.
Once the vinegar has sat for a couple of hours, use a moist cloth to scrub the mildew off of broad areas and a toothbrush to remove it from hard-to-reach spaces like corners. When youre done, rinse the entire area with water.
If any mildew still remains, make a paste that consists of three-parts baking soda and one-part water. Apply the paste to any remaining mildew and spray the affected areas with more white vinegar. Use a bristled brush to scour the area, and then rinse off any residual paste. If mildew is still present, use more paste and vinegar to treat the affected area again until the mildew is gone.
Cleaning Tiles And Other Smooth Surfaces
To remove mould from smooth bathroom surfaces, including tiles or a basin, spray a cleaning solution onto the affected area and wait for it to soak in. There should be a visible coating, but try not to over-saturate the affected area.
Using a cloth or sponge, wipe the mould away, remembering to use a new side of the cloth when the first side becomes too saturated or dirty. You may need to use more than one cloth or sponge if you are cleaning a large area. If the mould isnt coming away, use a dedicated scrubbing brush.
Also Check: Mold On Grout
How To Get Rid Of Black Mold In Shower Caulking
I wrote a whole post about removing black mold from shower caulking, though my bleach method has been critiqued for not actually doing more than removing the stain and color of the mold. And the mold did come back 6-9 months later.
You can see my video tutorial about how I did it though:
This is because bleach is no longer considered to be the best way to remove mold. It is only effective if the mold is on a non-porous material like tile, bathtubs, glass, and countertops. It doesnt reach the mold growing underneath the surface. Also, bleach can damage the materials it is used on as its a harsh, corrosive chemical. The fumes are strong and harsh and it must be handled with gloves.
But, it does do a great job at removing the mold stains, but the mold isnt truly killed.
You can instead use vinegar, baking soda, ammonia, oxygen bleach, borax or hydrogen peroxide.
I, however, have not been able to find many tutorials on how to use these products specifically for cleaning moldy caulking in bathrooms, so if anyone has tried using them, with success, Id love to know! I tried making a paste of water and OxiClean and slathered it onto the moldy caulking, but it did absolutely nothing. It dried out shortly after application and didnt remove the mold or the stains at all.
Beneath The Bathroom Sink
Mold growth can occur under a bathroom sink in 3 common scenarios. First, mold growth can appear after a leak from the water supply lines or the drain pipe. Typically a leak in the supply lines will cause mold growth and water damage to the bottom of the vanity/cabinet. A leak in the drain line is less common, but can occur in the cabinet or in the adjacent wall.
Second, mold can occur due to condensation. Typically this happens in a home with poorly or completely uninsulated exterior walls. These walls remain cool, while the interior of the home is heated. This temperature differential creates a surface below the dew point, and thus, condensation occurs. A moisture meter is helpful for differentiating condensation based mold growth from leaky plumbing. Except for extreme circumstances, the condensation based mold growth will not exhibit a measurable level of increased moisture in the wall. However, mold growth from a leaky pipe certainly will.
But looks can be deceiving. Damage from old leaks can leave stains that can appear actively wet. In the image below a moisture meter shows the moisture content of the cabinet is normal.
Notice the damage to the plywood beneath the countertop.
Recommended Reading: How To Remove Mold From Shower Ceiling
