Sunday, March 10, 2024

How To Install Vinyl Stair Nose Molding

How To Install Vinyl Planks On A Landing

Vinyl Overlap Stair Nose Installation Video | Zamma Corporation

If you want to install vinyl planks on a stair landing, you can follow the same directions that you would with a standard floor. The only change is that you need to add a stair nose along the edge first.

  • Measure the dimensions of the landing. Based on this, calculate how many rows you need, and determine if you need to rip cut the final row of planks to fit along the wall.
  • Cut the planks to fit and do a dry lay to make sure everything fits together nicely before permanently installing.;
  • Start by installing the first full plank and the stair nose at the edge of the landing. Then work your way back to the wall. These planks should be glued down, and not floated.
Related Content >>How to Install Vinyl Flooring

Essential Stair Nosing Installation Tips For The Meticulous Contractor

Posted byAngela Blair on Oct 27, 2016 12:50:47 PM

No matter what type or brand of stair nosing you have chosen for your project, you will want to make sure that you get off to a good start with proper installation techniques. In this article, I will share some key tips and instructions that we have acquired over the years that are designed to help your installation process.

Clean Up Is Important

After you have secured the stair nosing to the step, go back and remove any excess adhesive while its still wet. This will be a lot easier than trying to get it off after it has dried. ;

Its a good idea to have a suitable wipe or cleaner on hand when you begin the project, so that youre not looking for something to use for clean up at the last minute.

Once youve completed these steps, your stair nosings will be installed safely and properly. If youd like to learn more about stair nosings, check out the articles below:

Don’t Miss: What Kills Mold Spores On Wood

Install The Stair Nosing

A stair nosing strip made of plastic or aluminum protects the edge of the stairs if theyre not covered by a rounded edge, bullnose, or flush stair nose yet. A laminate or hardwood stair nose is important because it protects the steps from possible damage and acts as an anti-slip surface.

A stair nose molding may come in different types and shapes. It might fit into the tread and over the risers top, but it may also fit over the tread with a metal bracket that needs to be screwed into the subfloor.

Regardless of its installation method, the laminate stair nose is the most vulnerable to damages, so make sure to glue and nail it properly onto the floor. Some stair noses also come with special instructions so make sure to read them well before installation.

Stair Nose Molding Shaw Floorte Pro Blackfill Oak Vsst6

Zamma Brazilian Cherry 3/4 in. Thick x 2

FREE SHIPPING on orders above: $1,500Free shipping tooltip.Free shipping tooltip.Free shipping tooltip.Free shipping tooltip.

Ends : 07/01/2026

Stair Nose moldings are vinyl wrapped and feature a waterproof plastic core. The moldings are 2.07″ on the top and 0.75″ on the overhang and are 94″ long and easily snap into the included plastic strip.

These moldings are made to complement flooring tones.

Warranty:

Floorte moldings have the same warranty as their paired floor. See Floorte flooring for manufacturer warranty details.

The warranty remains valid if the molding is installed properly and maintained according to the manufacturer’s installation and maintenance guide. The warranty is only valid for the original end-consumer and is not transferable.

Read Also: Can Black Mold Be Removed From Wood

How To Install A Stair Riser

A stair riser is the vertical surface of each stair. The first thing you need to do is determine if you want to install vinyl planks on this surface, or if you want to give it some other treatment, like staining or painting it in a coordinating color.;

If you choose to install vinyl flooring on each stair riser, heres what youll need to do.

  • Measure the length and height of the riser and cut a vinyl plank to fit.
  • Spread adhesive on the back of the plank and firmly press it against the riser.;
  • Fasten the corners and edges with screws or nails, so the plank stays secure as the adhesive dries. Dont install fasteners in the middle of the plank, where they are easier to see.

Allow Adequate Curing Time

Although curing time for adhesives varies depending on the manufacturer, a good rule of thumb is to allow 1 hour after securing the stair nosing to an absorbent surface and 2 hours after securing to a non-absorbent surface.

Always check the specific recommendations on the adhesive that you have chosen to use.

Read Also: Can Black Mold Cause Irregular Heartbeat

Vinyl Plank Installation Tips And Tricks

While the process of installing LVP on stairs is easier than installing hardwood or laminate, there are still some tips and tricks you can use to make your install go more smoothly.

  • Use a stair gauge, especially if you have an older house or stairs that are not uniform.
  • Ensure there is no space between your nosing and riser. Rough fit pieces before gluing.
  • Sand the underside of nosing and tops of vinyl tread edges and risers if installing overlapping nosing as it will improve adhesion.
  • Use a vinyl cutter. You can rent one cheaply and it cuts better, straighter, and faster than other options.

Report This Adstep 2 Adjust Existing Stair Nosing

INSTALLING A VINYL STAIR NOSE WITH PERGO FLOORING

Depending on your subfloor, you may have a subfloor with a tread that overlaps the riser. If not, you can skip this step. If you do have a nosing, youll make your life way easier if you remove the overlap, so you have a nice right angle between your tread and riser on the stair subfloor.

You can add lumber of the thickness of the overlap over the existing riser to eliminate the nosing on the subfloor. Any lumber you add to your stair riser subfloor will have to cover the entirety so that the vinyl plank has a complete surface to adhere to.

If you leave the subfloor nosing on your stairs, you will not be able to use the nosing that goes with your LVP flooring. Some DIYers have found ways to bend their planks over the subfloor nosing, but there is no evidence that those solutions will stand up over time to the punishment a set of stairs takes.

You May Like: Who To Contact About Mold In Your Home

How To Install Vinyl Plank Flooring On Stairs

If youve installed vinyl flooring in your home, you may want to;consider extending it to your stairs. Updating your landing can give your home some more freshness, and matching the stairs to the room they are in;keeps your design cohesive. Additionally, many homeowners use vinyl flooring on their stairs as well as elsewhere because its easy to install and clean. Before you buy more vinyl pieces for your home, take these items into consideration:

Narrow Width Vinyl Planks On Stairs

Some LVP products are narrow, requiring more than one plank per stair tread. One thing to avoid in this situation is a tread or riser with one full piece and one very narrow width piece to fill the remaining narrow void.

For instance, lets say you have 8 wide planks and you have a tread that is 8.5. Youll end up with a tiny strip of ½ plank. This will more than likely come loose over time.

You can avoid this by cutting your first piece narrower in half and then using another piece to make up the difference. You can then use the waste of either for the next tread and move down your stairs using the waste on each subsequent step.

Also Check: Will An Ozone Machine Kill Mold

How To Install Vinyl On Stairs With Nosing

Updated By Michael O’Connor

We use affiliate links and may receive a small commission on purchases. Learn more

If you have a set of stairs that you use on a regular basis, you will want to protect it.;

One of the best ways to do this is to install vinyl plank flooring on the stair treads. Not only will it protect the tread of the stairs, it will also make them safer.;

To enhance the look as well as the safety, install nosing on the stairs as well.;

This helps protect the edge of the stairs if they get a lot of traffic. It will also give the stairs better grip and prevent tripping as people are walking up.;

Which Armstrong Flooring Products Have Coordinating Trim

Zamma Nashville Oak 1 in. Thick x 2

Armstrong Flooring offers a wide selection of coordinated trim and molding to complete almost any hardwood, laminate, luxury vinyl tile or engineered stone tile look. To find the coordinating trim and molding we recommend for your particular flooring, look at ‘Trim and Moldings’ under the ‘Installation’ section on the flooring product detail page.

To add visual space to a room, choose trim and molding that closely matches your flooring in color and style. For example, if youre going for a rustic look with Oak hand-scraped hardwood flooring, youll want to select trim and molding that complements the Oak species with a scraped surface treatment.

We offer coordinating trim and molding pieces for most of our floors. Many are an exact match, which means we’ve created a digital 1:1 match of the color and style, providing a seamless transition between flooring and trim.

Here are our products or product lines which offer coordinated or matching trim and molding. The specific types of trim available will vary depending on the product.

Don’t Miss: What Do You Do To Get Rid Of Mold

Now Install The Stair Tread

Once you are sure that everything and measures fit well, its now time to install them. Start by applying the glue or adhesive behind each stair plank tread and put them in a good position by pressing them using less force. Remember, it will help your new stairs be strong if you apply the glue using an s-pattern.

Dont forget to use the nails and screws to hold the treads as you continue your installation process. Put them in the corners and along the edges where you will not notice them when you cover them with a riser if you use them.

How To Install Vinyl On Stairs With Overlapping Nosing

The above directions include information for flush stair nosings. However, some LVP products have nosings that overlap the ends of the tread instead of sitting flush. This style is much simpler to install and makes tread measurement easier, too.

When installing overlapping stair nosings, cut your LVP stair treads and risers to sit flush with the edge of the step. Your nose piece will sit on top of both the tread and riser and youll glue it to both pieces. Apply a heavy s-shaped application of glue to the flat part of the nosing and a straight bead along the part that will contact the riser.

You May Like: How To Remove Mold From Blankets

Cut First Riser Tread And Nosing

Use the flooring cutter or a utility knife to cut your first tread, riser, and stair nosing piece. If your stair tread requires more than one piece of plank, then youll need to use a spare piece as a guide for cutting the length of the other piece. You could also use a level or any other tool with a long, straight edge.

Using a flooring cutter for lengthwise cuts is not an option as most cutters only cut from 12 to 20, so even if you have one, youll still need your utility knife. A table saw works too, if you have a fine-toothed blade.

If using a utility knife, a speed square works best for crosscuts. Put the T end at the top of your plank and cut downwards against the other side of the square. Adequate pressure will do, as you only need to score the top. After scoring, bend the piece of vinyl at the point where you used your knife and it should snap nicely on your cut.

Remove the exposed tongue from the edge of the riser and tread pieces. This ensures it wont be visible and that the finished part of the planks sits flush against the edges of each riser and tread. Use your blade and the visible part of the vinyl as a guide. You may need to take two passes to get the entire tongue removed.

Finally, when cutting the nosing, use a hacksaw or other fine-toothed saw. Clamp your nosing to a table and cut slowly to ensure a straight cut. Cutter will bend the nosing out of shape and a blade wont work. Alternatively, you can use a saw box to help you achieve a 90-degree cut.

Finishing Touches And Cleanup

How To Install Metal Stair Nosing for Vinyl Flooring on Wood Stairs

Once everything has been installed, make sure that all the nail or screw holes are filled up with putty. Clean the stairs immediately before the putty dries because this material is difficult to remove once it has set. Sweep the dust from the staircase and leave it overnight to let the new flooring settle.

You May Like: Does Black Mold Cause Seizures

What Is Vinyl Plank Flooring

Vinyl flooring is vinyl planks that click together, which allows them to be connected in a similar way to laminate flooring. They come in many different designs and patterns, mimicking the look of laminate or even hardwood floors.

Planks are made primarily of PVC with a high-res image put on top, often of some type of wood look, but there are also stone, ceramic, and other images that mimic other flooring types. The top is the finish layer which prevents scratching and stains. Some brands come with cork or foam on the bottom, negating the need for underlayment.

Vinyl planks are very easy to install and very durable, making them an ideal option for use on stairs. Manufacturers of vinyl planks have their own nosing pieces that you can purchase to adapt your planks for installation on stairs.

How To Transition Vinyl Plank Flooring To Stairs

Many homeowners prefer vinyl tiles for stairs because they are;smaller and therefore simpler to lay. However, sheet flooring may be ideal if you need to wrap the vinyl around the edge of the stairs. Consider the look you want for your stairs and the installation process that will be easiest for you when deciding on a type of vinyl flooring.

Furthermore, you can purchase stair treads, or the pieces that go over the edge, made of vinyl. Instead of cutting tiles to cover the front of your stairs, just;use the treads.

Don’t Miss: How To Clean Mold Off Plastic Cutting Board

How To Install Laminate Flooring On Stairs With Stair Nose

Laminate floors are a popular flooring option for many homeowners for several reasons theyre cheap, durable, and easy to install. Theyre also made to fit the conditions of almost any room or part of the house, including the stairs. However, placing them on the stairs requires special installation instructions.

So whats the right way to install laminate flooring on the stairs with a stair nose? Every home renovation project should start with a clear pre-installation plan. The laminate planks are glued together and cut at the right size. The right order of installing the material on the stairs is riser first, tread next, and nosing last.

Measure Top Tread And Riser

Zamma Biscayne Oak 1 in. Thick x 2

Measure the top riser and tread, working your way down the flight of steps. You must work from the top step since you must let the adhesive set for several hours before using the stairs. Thus, once you glue it on, you cant stand on it and glue the next stair down.

If you are using your stair gauge, adjust it, so either edge sits flush against the edges of the wall. Then remove it, set it atop your first vinyl plank, make a mark, and cut it.

When measuring your tread, youll need to account for the width of the flush stair nosing. Measure the width of the nosing, and place it on the subfloor tread. Make a mark along the tread where the nosing ends. Then measure from the back edge of the tread to the mark you just made. This will be the width of your LVP tread.

Risers should be measured from the top edge, flush to the edge, to the bottom where they will sit on top of the tread. Use a spare piece and place it on the tread. Then sit your measuring tape on top of it and measure to the top of the riser. This is how wide your tread will be.

Read Also: What To Do If You Have Been Exposed To Mold

S To Install Vinyl Plank Flooring On Stairs

Are you thinking of making your staircase more beautiful using a new vinyl plank flooring, but dont know how to do it yourself? Well, dont worry because there is good news for you. In this guide, we will explain installing vinyl plank flooring on stairs using simple steps.

Although it can seem challenging for you at first, please dont lose hope; its not hard to install flooring on stairs. We are here to make it easier than you think. So, we will begin with what materials and tools you will need and then look at easy-to-follow steps. Ready? Lets dive in!

Can You Put Vinyl Plank Flooring On Stairs

Yes, you can put vinyl plank flooring on the stairs. Careful measurement of risers and treads will allow you to adhere planks to your stairs accurately. Install the appropriate nosing piece flush or over the stair tread nose to transition between the tread and riser.

When purchasing LVP for stair installation, do your research to determine what type of stair nose piece is available for the type of vinyl plank you want to buy. Some will have nosings that overlap the end of the tread, while others offer flush versions.

If you like the look and feel of flush nosing, then be sure your LVP brand offers it. Installing flush nosing is more time-consuming than overlapping nosing but can make a smoother walk up and down the stairs.

Many people prefer to have vinyl planks on stairs due to its durability and relative ease of installation. It relies on ultra-strong adhesive and the application of the planks is very straightforward.

Recommended Reading: What Mold Does To Your Body

Popular Articles
Related news