How Does Mold Grow
Mold needs three things to grow and reproduce in your home.
First it needs oxygen, which there isnt much we can do about.
Second, it needs organic matter to feed off of such as wood, paint, fabric, foods and other materials.
Last, mold needs moisture. Moisture is the key to mold growth in your home. We cannot cut out oxygen or organic materials in our homes, but we can control the moisture found in our homes.
Mold And Kilz Question
A Kilz type product was used over some wood with black stains which we now realize may have been mold. What should we do now? Can we treat the KIlz painted wood with a mold killer now?
- 1I ask because latex is mildly porous – you can bleach right through it. If it’s oil based, you may have to scrape or sand a little first, then bleach.
I would be sure and get rid of the source of the mold as the kilz did not stop it. I am not a handy person, but, for mold I would consider a thorough job is essential to the existing mold not just painting with kilz as there are future unforseen health concerns.
If it was oil-based Kilz, you’ll need to remove it. Rather than the previously suggested sanding, I’d recommend applying turpentine or mineral spirits and scrubbing with a disposable scotchbrite pad. Sanding has a greater risk of spreading mold spores, not to mention being more effort.
Bleach is ineffective at killing mold on porous surfaces such as unfinished wood. Ditto most “mold killers” you’ll find down the cleaning aisle at most stores – most specify this in the instructions, some you have to check the website to find out. Products for porous surfaces exist, but can be hard to find and identify. Foster’s 40-80 is the only one I know of that advertises that it kills mold on porous surfaces, but I’ve read that plain old white vinegar does the job, too .
Safety For Working With Mold
If you have found mold in your home and you plan on remedying the issue yourself, you need to make sure to take the appropriate precautions.
Make sure to wear gloves, a protective suit, a respirator and use a HEPA filter vacuum to make sure mold spores dont escape into your home.
Disturbing mold without a plan for protecting yourself and keeping the spores contained can cause health problems and even help the spread of new mold.
Also Check: Black Mold On Cutting Board
Will Lysol Kill Mold
Cleaning Mold From Bathroom Ceiling
Prep And Prime The Moldy Surface
You wouldnt paint a dirty wall, would you? In the same way, you want to remove the now-dead mold.
It is recommended to continue wearing your mask for this part. Once the mold killer has time to dry, it is time to scrape, sand, and remove the mold. Some people try to use vacuums to remove the sanded dust, but this risks further disseminating the fungus spores into the air.
A rag that has been dampened with bleach water or Windex seems to work well for removing small dust particles and cleaning the area once you have fully sanded and scraped the area.
Once the area has been cleaned, it is time to prime the surface. This is where I like to use Kilz or another mold inhibiting product. These primers are not mold-killers, but they do discourage the recurrence of the mold.
If you are painting a deck, use a mold-resistant primer to help provide an added barrier against future mold problems.
Don’t Miss: How To Remove Hair Dye From Linoleum Floor
Keeping Further Mold Outbreaks At Bay
Once the paint is applied to the wall and is properly dried off there isnt much more you are supposed to do. However, if preventing the future development of mold is a concern, then there are a lot of different actions you can and should consider.
Generally speaking, you need to make sure that the conditions in the room are as unfriendly towards mold as possible. They need to be dry and properly ventilated and you need to remove any form of condensation. If the room is used regularly, then keeping a warm and dry temperature is a good thing to do against the future development of mold, but there are situations when even that isnt enough.
If the mold is extra stubborn and / or the wall it is spreading on is just too susceptive to mold, you might need the extra help of a dehumidifier. Some walls and buildings just cant not develop mold because of their structure and the outside weather. A good dehumidifier can help immensely in situations such as these. A lot of people get put off by the idea of a dehumidifier because they imagine a huge, industrial grade, whole home machine that connects to the HVAC. And while there are, of course, such dehumidifiers, if the problem is localized in one room or your place isnt that big, a small portable dehumidifier can work wonders as well.
Aside from that, you should just keep the levels of moisture and humidity in the room within an acceptable region and routinely check for even the smallest signs of a new mold infestation.
The Best Mold Killing Primer
When it comes to mold killing primers, there arent many products on the market that claim to actually kill mold. As far as wide spread availability, there is only one.
Zinsser Mold Killing Primer is the only product on the market that claims it not only prevents future mold growth but actively kills existing mold.
However there are a few notes to consider before slapping it all over active mold.
First, Zinsser does say that their mold killing primer is meant to be applied on smooth surfaces. If the surface is porous, the primer may not reach the mold in the pores and thus not kill it and allow for future growth.
Other products on the market that claim to kill mold are not available at your local hardware store, and thus dont need to be mentioned here.
You can buy Zinsser Mold Killing Primer here.
You May Like: How To Clean Mold Off Plastic Cutting Board
Will Mold Killing Primer And Mold Resistant Paint Be Enough To Protect Me
We recommend this mold resistant paint by a very trusty brand, Zinsser .
Mold inhibiting paint will not kill mold! . The general name is mildew, and it will grow right through ordinary house paint: you must mechanically remove all you can, then SEAL it with a mold killing primer such as Zinsser mold killing primer. Its not the nightmare you were expecting, and we simplified it all here.
If you are in doubt as to whether you can use anti mold paint or not, I highly recommend that you call a professional mold remediation company to evaluate what needs to be done. A company like FDP Mold Remediation can handle the worst cases.
A product new to me is Siamons Mold Control. Like BioBarrier, it leaves a film that is hard for mold to grab. If you have a recurrent mold problem and nothing works, get the large bucket and clean with it every time. Considering the health risk, the cost is quite reasonable.
Does Mold Killing Paint Work
Zinsser Mold Killing Primer can be used to paint over and kill existing surface mold, mildew and odor-causing bacteria. It may look clean once youre done, but the mold will grow back within weeks. Bleach is also particularly ineffective at treating mold on porous surfaces such as drywall, lumber and grout.
You May Like: Remove Mildew From Boat Seats
How Do I Prevent Mold After Remediation
After professional remediation, youll want to do everything you can to prevent the problem from returning. There are a variety of ways to prevent mold. They will require continued diligence and maintenance. Ultimately, the work put into your home to keep mold away will keep yourself, family and household safe.
- Mold-resistant primer
Before embarking on your painting journey, be proactive and use a mold-resistant primer. This is especially important for rooms where moisture is prevalent, like the bathroom or kitchen.
- Take control of your humidity
- Properly dry and clean spaces where leaks or floods have occurred
- Making sure all spaces are completely dry is a huge step toward preventing mold. If you have spaces in your home that are notorious for leaking or flooding, regularly check in on them and dry the area with a towel, as needed.
Can You Or Should You Paint Over Mold Or Mildew
While paint itself will not get rid of mold or mildew it is important to find the source of why and where the mold is coming from. Ignoring the issue of the root of the problem of finding out where the mold originates will only continue to cause you grief and even after failing to try to hide it by painting over it with a moisture resistant paint primer or other paint product, mold will continue to find its way back to the surface and continue to reappear.
By simply painting over it will not alleviate or rid you of the problem and painting any over mold or mildew should only be done after taking the necessary precautions and recommended steps to reduce your risk of mold and mildew health problems.
In this article we will help you learn to identify if you have mold or mildew problems in your home, the difference between mold and mildew, what the possible causes might be, and how to eliminate it and paint over it safely and prevent it from returning.
You May Like: How To Clean Mold Off Plastic Cutting Board
Mold Is Not Dirt Or A Stain
This is something else that a lot of people forget. Mold is an actual microorganism that grows on your walls and other surfaces. It is a fungus and it doesnt really mind paint. In fact, mold eats through painted surfaces without a problem. Thats why mold causes discoloration its the result of the chemical reactions between the mold and the painted surface.
Which Is Better Kilz Or Zinsser
Zinsser offers more consistent quality across its range of mold and mildew-resistant paint primers than KILZ. There are some excellent products from the KILZ ranges of paint primers, but when compared side by side with Zinsser products, they are not as effective.
The Zinsser Bullseye 1-2-3 paint primer offers excellent coverage and doesnt allow colors of mold underneath the paint to bleed through. It can also be used on a wide variety of surfaces including wood, drywall, and even masonry and dries within 30 minutes of applying it.
Read Also: How To Clean Black Mold On Shower Grout
What Makes It So Dangerous
What makes mold so dangerous is the mold spores it releases in order to reproduce. The spores become airborne, especially when disturbed by rubbing or cleaning, and they can be breathed into the lungs. When these spores are inhaled, serious lung infections may occur. Black mold spores are especially dangerous and they can cause lasting health conditions.
Furthermore, mold can cause skin and eye irritations. It can worsen or even cause the symptoms of asthma and allergies. It is therefore important that mold is eradicated from the home before it could take a hold on your health. It is also imperative that a mask is worn when working with mold.
The Best Mold Resistant Paints
For mold resistant paints, you have a much larger selection than with mold killing primers!
Most paint brands offer at least one mold resistant paint with antimicrobial properties.
If you look around here at DIY Painting Tips, you may notice that I am quite fond of Behr products. This is because they are high quality, readily available and not only state a great warranty, but my experience with their warranty is better than any other paint brand. So once again, Behr tops my list.
- Valspar Reserve
Read Also: How To Clean Mold From Leather
What Is Kilz And What Does Kilz Do For Mold
Kilz is a company that makes paint primers designed to prevent black mold and other types of mold, mildew, stains or odor in your property. Kilz makes an aerosol spray paint primer for mold and a regular paint primer for mold. The spray paint primer is designed for small and hard to reach places while the regular paint primer is good for larger surfaces that are easy to reach. The Kilz mold and mildew products are water based primer-sealer-stainblockers that are made for building surfaces that are at high risk for mold and mildew growth due to high levels of nearby humidity or moisture. They provide good adhesion on both interior and exterior surfaces and offer a good paint anchor like primers are typically supposed to do.
How To Remove/clean Black Mold
What is the best way to remove black mold from wood?
Specifically, the mold on my back porch is black mold. Is the best option to use something like Kilz over it?
- 2Do you have a respirator? This is nasty stuff you don’t want to breath. If you don’t have a respirator get one, or call a professional to do the work.Sep 15 ’11 at 12:04
- 3Have you had this “Black Mold” identified by a lab? I seriously dought you have toxic black mold on an outdoor porch, it is probably common plant mold. You must have it tested to know, the color doesn’t mean a thing.Sep 15 ’11 at 22:41
This is a problem best suited to the professionals, but if you must do it yourself the number one priority is the safety of you and those around you. This can be a very hazardous task, if you do not take every precaution to contain and remove the spores properly.
The first thing you’ll have to think about is containment, you don’t want to spread the mold spores while you clean the area. You’ll want to seal off the area with plastic sheeting, making sure all seams are properly sealed.
Once the area is sealed off, you’ll need the appropriate clothing.
- Tyvek suit .
- Rubber gloves.
Recommended Reading: How To Get Rid Of Mold On Ceiling In Bathroom
Does Borax Kill Mold
Most, but not all types of mold preferan environment where the pH is somewhere between 3 and 7, which is more on theacidic side . Some molds even like tolive in pH environments below 3.
Remember how I said that borax isquite alkaline with a pH of 9.3? Applying borax to mold creates anenvironment that is not suitable to additional mold growth. In many cases boraxkills mold spores by turning up the pH levels and making their environmentalinhospitable.
Borax wont always kill mold but inmany cases it will.
Kill And Clean The Mold
The first step is to kill the mold and clean the surface.
This is most commonly done by washing the area with bleach and water mixture.
Mix 3 parts water to 1 part bleach. The bleach mixture will kill the surface mold and help remove the stain color from your walls.
Make sure to wear a respirator and rubber gloves when using bleach as the fumes are toxic and bad for your skin.
Rinse the area with a wet rag to remove the bleach and allow the area to dry 100%. A fan and/or dehumidifier will help significantly.
Read Also: How To Clean Mold Off Bathroom Ceiling
How Can I Paint Over Mold To Prevent It From Coming Back Again
The source of the leak has been fixed, however the old mold keeps showing though the new paint.
Don’t try painting over mold. Use bleach to get rid of it first. Make sure the entire area is completely dry. Then use a special anti mold paint.
- 8This. If you paint it over your mold will never go away. This is your best bet. If you just cover it up you will get some serious problems later. Mold in homes can really mess up your health too.Aug 19 ’10 at 13:31
- what kind of bleach do you use ?Mar 27 ’12 at 6:04
- 2This site recommends using a 10% Borax solution instead of bleach. They claim it works better and is less hazardous to you. According to that site, bleach releases carcinogens when it makes contact with mold.Mar 10 ’13 at 23:07
- 2Bleach is not the best way to kill mold. Yes it will kill it, but the mold spores will sense the bleach, and migrate. Professional mold products are available but you probably won’t find them at Home Depot. user13230May 28 ’13 at 23:38
- I used bleach and water and it does work user15364
Can Zinsser Mold Killing Primer Be Tinted
ZinsserMold Killing Primercanpaint overkillmoldmildewMold Killing Primer canZinsser
Do Mold Killing Primers Really WorkAccording to Rust-oleum, the maker of Zinsser, Zinsser Mold Killing Primer does actually kill the mold and prevent future mold growth.
Additionally, can you paint over mold with Kilz? Kilz is not anti-mold paint. This will kill the mold as well as prevent new mold from growing. Once that is done you can cover the area with Zinnser Bulls Eye 1-2-3 Waterbase Primer. The bulls eye IS mold and mildew resistant.
In this regard, will painting over black mold kill it?
Painting over mold does not remediate the problem. The paint will not kill the mold, and it will only hide it for a short period of time.
What is the best primer for mold?
Zinsser Mold Killing Primer is a water-based fungicidal protective coating that can be used to paint over and kill all existing mold, mildew, moss, fungi, odor causing bacteria and any other fungal organisms.
Read Also: How To Clean Mold From Leather