Friday, May 13, 2022

How To Use Mold Control Spray

What Is Concrobium Mold Control

Concrobium Mold Control | The Home Depot

In several articles on the web, readers have been advised on how to create their own mold killerproducts from natural ingredients, such as borax or essential oils. There is even advise on how to concoct a DIY laundry detergent, as well as some insight into the effectiveness of antifungal supplements and antifungal diets. This is quite possibly because many commercial mold removal products are ineffective and equallyif not morehazardous to the consumers health. Over the past few years, however, one product in particularConcrobium Mold Controlhas held the attention of mold remediation experts. Could this product be as effective against mold as it claims to be?

Currently, Concrobium offers three mold removal products, two of which target superficial and embedded mold stains, as well as provide a mold-preventing layer on a variety of surfaces, including decks and housing exteriors. While all three products contain the same chief ingredients and serve similar purposes, the only product being explored today is the one thats been specifically hailed as a mold killer: Mold Control.

The validity of their claims and the foundation of your trust as consumers in this specific mold killer and Concrobiums other mold removal products must be based on the efficacy of their ingredients, which is precisely what will be discussed next.

Best Preventative: Mold Armor Rapid Clean Remediation

This EPA-registered mold remover doesnt just single-handedly eliminate mold and mildew, it also inhibits the growth of new spores. MoldArmor Rapid Clean Remediation is a mold preventative thats safe for use on a long list of non-porous surfaces, including laminate, sealed fiberglass, acrylic, glass, sealed grout, glazed ceramic, sealed granite, vinyl, and more. This makes it a great defense in damp or humid areas of the home, such as the bathroom, laundry room, or a screened porch. Its safe for both outdoor and indoor use, but be sure that you have adequate ventilation since the fumes of this mold preventative can be powerful.

The formula is a one-step sanitizer, disinfectant, and mold and mildew remover. Just spray it on the surface that needs to be treated, follow the directions for wait time depending on your application use, and then rinse or wipe it away. This makes it super easy to deal with your existing mold and mildew problems, while reducing future growth.

Mistakes To Avoid While Mold Cleanup

When doing mold remediation on your own, make sure to avoid the following mistakes:

  • Choosing the wrong mold cleaner. Again, bleach is not what kills mold. Cleaning mold with bleach is not going to help. The best way to clean mold is by using natural products like the ones mentioned above.
  • Not addressing cross-contamination. Heres one important thing you should know. Once you start scrubbing off the mold from the surface, some of the spores will become airborne. This means that your entire home can be exposed to mold infestation. Thus, it is essential to containing the area. Dispose of all the cleaning materials and clothing you used to prevent cross-contamination.
  • Not eliminating the moisture source. No matter how hard you clean the parts of your home infested by mold, it will just keep coming back until you address the moisture problems. After the cleanup, speak with a mold remediation professional to determine the causes of water problems or leaks in your house.

Don’t Miss: How To Remove Mold From The Ceiling

What Is The Best Mold Killer For Carpet

The best mold killer for your carpet is either distilled white vinegar or hydrogen peroxide. Both of these wont stain the fabric, making them great choices. Plus, they can be absorbed into the fabric, killing the mold deep inside the carpet.

The Micro Balance EC3 Laundry Additive is made for clothes, but works well on all kinds of fabric, including carpets. Made of natural oils, this mold killer will keep your carpet looking and smelling fresh.

Get The Right Cleaning Products

mold_control_spray_bottle

First things first prepare what you need. Basically, you need a reliable product in cleaning mold. Many household owners think that bleach is an effective mold treatment. But contrary to the popular view, it isnt. Bleach is a strong chemical which can harm your health. Also, it does not get rid of the mold. It only changes its color from black to white or grey. After a few weeks of bleaching, there is still a big possibility that the mold will come back.

A DIY mold remediation product that mold specialists usually recommend is borax a white powder which you can purchase from the grocery, at the detergent or laundry section. To clean mold using borax, mix the powder in one gallon of hot water. Apply the solution on the surface affected by mold and scrub the area with a rug or brush until the mold disappears. Theres no need to rinse it off because borax will keep the mold from coming back. However, do not use this cleaner on porous surfaces like drywall. Such materials absorb water easily. This could aggravate the problem because as you know mold loves moist environments.

Some other safe yet effective products you can use to kill mold are baking soda, vinegar, Tea tree oil, hydrogen peroxide, and detergent. If youre using vinegar, simply put it in a spray bottle. No need to add water. Spray the vinegar on the surface and leave it for an hour.

You May Like: Removing Mould From Bathroom Ceiling

Fast Steps To Get Rid Of Mold In Your Crawl Space

Last Updated on August 27, 2021 by Diana Rodriguez-Zaba

The crawl space isnt really inviting. You dont go down there very often. Still, the whole house smells musty, and youve looked everywhere else. You grab a flashlight and take a peek. Right away, you can see the source of that unpleasant odor. Its there in the crawl space.

You know how to deal with the stuff under a sink. Do you know how to get rid of mold in a crawl space?

As a DIY project, crawl space mold remediation is usually manageable, but you have to be very careful. You need personal protection gear, the right cleaning products and plenty of patience.

Dont Risk Your Health

As sure as you are of your DIY talents, dont risk taking on a job thats too big or too dangerous. We strongly recommend calling in a mold remediation service if:

  • Affected areas include damaged or rotted wood.
  • Mold covers multiple areas larger than 3 square feet.
  • You or any family members deal with allergies or respiratory problems.

Bringing in a mold remediation specialist also addresses issues like identifying and eliminating mold sources and repairing and replacing affected materials.

Recommended Reading: Removing Mold On Bathroom Ceiling

What Is The Best Mold Killer For Cars

The best mold killer for cars is distilled white vinegar. Youll want to spray the distilled vinegar in the areas the mold is growing, being careful not to leave any stains. Vinegar wont stain the interior of your car, saving you from having to clean the car twice.

If your car has a lot of fabric in it, the Micro Balance EC3 will work the best for you. Simply spray this mold killer around your car and wait for the mold to die.

Best Natural: Benefect Botanical Decon 30 Disinfectant Cleaner

Getting Rid Of Mold With Concrobium MoldControl Spray-EASY DIY

For a more natural approach to removing mold and mildew that doesnt require strong chemicals, consider the plant-based Botanical Decon Disinfectant from Benefect. Some mold removers contain strong chemical agents that call for you to wear PPE and produce strong fumes that require ventilation. On the other hand, Botanical Decon is a more gentle formula that has no chemicals, dyes, or health warnings. It requires no rinsing and is safe for contact with skin, food surfaces, and more.

At the same time, this product proves effective in the war against mold and mildew. Its registered with the EPA as a mildewstat and fungicidal product, and also kills bacteria and viruses. The proprietary formula uses Thymol, derived from the essential oil of Thyme, to produce results. In addition, Benefect incorporates chemistry techniques to create a long-lasting surfactant system that assists in preventing the growth of mold and mildew.

Naturally porous, woodan organic materialmakes a natural host for substances like mold and mildew. However, the discoloration and rot that they cause can bring serious headaches for homeowners. Treat exposed wood surfaces, such as deck material, fences, and outdoor furniture, with Wet and Forget Mold Remover, which is EPA-registered.

Read Also: Clean Moldy Leather

I Found A Hard Black Coating Under Painted Concrete In My Basement If After Cleaning Can I Paint Over It It Did Not All Scrub Up Does Mold Get Imbedded In The Cement

Based on your description, this does not sound like mold. On concrete, mold will appear in either a fuzzy format or a stain like appearance. It would not feel like a hard coating. In either scenario, it is fine to paint the concrete after youve thoroughly scrubbed and cleaned the area. Anything remaining is simply the pigment from the prior mold growth, which cannot regrow.

How To Use Disinfecting Sprays

To Sanitize and Disinfect:

Hold can upright 6″ to 8″ from surface.

Spray 3 to 4 seconds until covered with mist.

To sanitize:

Surfaces must remain wet for 10 seconds then allow to air dry.

To disinfect:

Surfaces must remain wet for 3 minutes then allow to air dry.

To Control and Prevent Mold and Mildew:
  • Apply to pre-cleaned surface

  • Allow to remain wet for 3 minutes

  • Let air dry

  • Repeat applications in weekly intervals or when mold and mildew growth appears

  • Read Also: Removing Mold From Shower Ceiling

    The Best Mold Killer Spray With High Durability

    The durability of the best mold killer spray 2021 is one of the essential things to consider while making a purchase. The best item will last longer and provide better value for your money.

    People always want the best for themselves, including the best mold killer spray. Many people in 2022 are not sure if they should spend money on them. If you can choose between two types of something, one has better quality than another. Usually, it is better to buy the best quality item under $500 because it will last longer than an inferior quality best article.

    People do not want to spend more money when buying a good product, so they review sites before purchasing items. Therefore, you can learn what others think of confident best mold killer spray before deciding if it’s worth spending your hard-earned cash on them or not. Review sites give customers information about the best items.

    Therefore, when shopping in 2020, you should choose the best mold killer spray with high durability to avoid wasting money.

    When it comes to kitchen trash cans & recycling bins, there are several factors you need to consider. Learn more!

    Concrobium Mold Control Ingredients

    Siamons International 025/326 Concrobium Mold Control ...

    Concrobium Mold Control is a patented solution comprised of purified water, sodium carbonate , sodium bicarbonate , and trisodium phosphate. Together, this unique, tri-salt polymer is intensely alkaline , which holds great advantage over mold.

    Mold mirrors the human body in that it prefers a specific balance between acidity and alkalinity. Both thrive between 6.5 and 7.5 on the pH scale, but mold can sustain itself between level 2 and 9. Anything below 6.5 is considered acidic, while anything above 7.5 is considered increasingly alkaline. Concrobium Mold Control reaches a pH balance of 11+, which makes this quite a mighty alkaline mold killer solution. While mold may lie dormant for a time in an acidic environment, it cannot survive long in one of high alkalinity, which is one reason why so many antifungal diets prescribe to alkaline foods.

    Furthermore, once this tri-salt polymer is sprayed on the mold itself, it begins to dry. The solutions molecules dehydrate and pull in on each other, which crushes the existing mold spores and their colonies. Even when the solution has dried and remains in place over the mold-affected area for several months, it continues to leave a lasting alkaline barrier that prevents the possibility of mold regrowth. This aligns precisely with what the company claims.

    You May Like: Best Way To Get Mold Off Bathroom Ceiling

    Where To Find Concrobium Mold Control

    Concrobium Mold Control is available from hardware and farm supply stores, such as Home Depot, Lowes, Ace Hardware, and Tractor Supply. You can also purchase it from a third party on Amazon. Depending on what the size of the infestation and the mold-cleaning methods you choose, you will want to read the instructions carefully. Some areas and methods call for nothing more than a sponge and their 32. oz. spray bottle. Other, more expansive cases, may call for the need for a Concrobium Mold Control fogger.

    We Recently Had A Concrete Shower Installed 30

    Yes, this looks like light mold growth. While this may be aesthetically unpleasant, its not likely affecting the indoor air quality. Concrete can be surprisingly porous, depending on how it cured. This porosity allows water to penetrate and can lead to mold growth. Prevention is best achieved by treating the concrete with a penetrating sealer. Note this should be done relatively soon, as the concrete loses its ability to absorb the sealant over time.

    Don’t Miss: Mildew On Leather

    Does Vinegar Kill Mold How To Use It Correctly

  • Tea tree oil
  • Mold is a natural decomposer that helps in recycling organic wastes, but not good when it grows in your home. The fungus can trigger allergies and other respiratory infections. Mold thrives in warm, dark, damp environments, expect it often in places like bathrooms, basements, and laundry rooms.

    While a widespread of mold is best controlled by professional mold remediation experts, white vinegar is one of the most effective household cleaner for occasional growth of mold in your home. In this guide, learn how to use vinegar to kill mold and mildew.

    My House Was Flooded From A Broken Water Pipe Resulting From A Freeze Is The White Snow Like Substance On Concrete Mold Or The Beginning Of Mold And I’ve Been Putting Rubber Mats On The Floor So That I Don’t Have To Walk On The Huge Amounts Of Dust From Replacing Drywall Please Tell Me How I Should Be Handling This Situation Ive Also Been Rnning Fans Thinking I Was Drying Out The Surface Of Concrete But I Turned Off The Fans After Reading The Fema Pamphlet

    Concrobium Mold Control: Indoor Mold Fighting Guide

    White growth on concrete is nearly always efflorescence, not mold growth. You can verify this by spraying a bit of water on the suspected growth. If its efflorescence, it will disappear as the crystals are dissolved by the water. If its mold, it will flatten, but remain visible.

    I recommend removing the rubber mats for now. The impervious nature of the mats will prevent the concrete from releasing the moisture. After a week or so, put a couple of mats back down. Peel them back a few days later and look for signs of moisture on the underside of the rubber. If you see moisture, pull them off and allow the concrete more time to dry.

    Also Check: Mold On The Bathroom Ceiling

    The Biggest Threats To A Healthy Home

    Areas that you suspect may trigger mold growth should first be inspected for any leaks or excess moisture. Once any existing leaks have been repaired, mold susceptible areas can be kept dry with a dehumidifier, which should reduce the incidence of mold growth.

    Treating areas of existing mold growth should always be done while wearing a respirator or mask rated for work with mold spores, and arms, legs and hands should be covered to prevent an allergic reaction. After removing any moldy debris such as sub-flooring or drywall, hard surfaces can be treated with commercial mold control products containing bleach or ammonia, which can help to eradicate any surviving mold.

    For continued mold prevention in problem areas, you can apply vinegar one to two times a week. Vinegar makes areas too acidic for mold growth, and can prevent moldy buildup in areas like showers and sinks. A regular scrub of the area with borax and water will also help to prevent and control mold growth. Always follow the manufacturer’s directions for the correct mixture ratio.

    Mold in homes can cause significant damage and even health risks, but by understanding the range of mold control and mold prevention products available, you’ll be equipped to keep your home mold free.

    Concluding Thoughts On Concrobium Mold Control

    While there is no guarantee that you will have success with Concrobium Mold Control on every mold situation you encounter, the ingredients and testimonies themselves support the idea that this is the very first commercial mold killer that can live up to its claims. As mold removal products go, the simple ingredients in Concrobium Mold Control far surpass any others that have been reviewed by mold experts who care not only about eliminating mold, but also protecting their readers from the harsh effects of mold-killing chemicals. Not only are they less harmful than other mold killer products that usually only combine bleach, theyre effective where it matters mostthe very cells and roots of the mold.

    If youre willing to give Concrobium Mold Control a try on your mold problems, please share your experience in the comments below. Your testimony with this and any other mold-fighting solution on MoldBlogger is very important to other readers who are suffering from mold.

    For more information regarding mold, mold prevention, and mold solutions, please check out the rest of MoldBlogger.com.

    Article by Amanda Demsky from the Moldblogger team.

    Recommended Reading: Best Way To Kill Mold In Basement

    How Does Concrobium Work

    You see, the active ingredients in Concrobium create a tri-salt polymer that is very alkaline. Mold does NOT like an environment with high alkalinity. When the formula is sprayed onto active mold growth, the solutions molecules dehydrate and pull in on each other, which crushes the existing mold spores and their colonies. Even when the solution has dried and remains in place over the mold-affected area for several months, it continues to leave a lasting alkaline barrier that prevents the possibility of mold regrowth. Once the mold is dried, it can no longer continue to grow.

    Concrobium works on drywall, wood,composite wood, plastic, concrete, siding, shakes, metal, brick, stone, tile,grout, stucco, fabric, furniture, upholstery, flooring, and many more surfaces.

    You can use it as a spray or in a fogger.

    Popular Articles
    Related news