Pressure Washing Vinyl Siding
Some vinyl siding manufacturers may advise against using a pressure washer, while others believe its an effective way to clean vinyl siding as long as only a limited amount of pressure is applied. Contact the siding manufacturer for additional information regarding your specific products recommendations.
Ways To Clean A White Vinyl Fence
Washing your entire fence, not just the places that look dirty, is important for proper maintenance of your fence. You dont want to treat only the places that look dirty, only to have the rest of the fence start to mold and mildew a few weeks later.
These non-toxic ideas will easily clean a fence, as well as vinyl siding on your house, too!
How To Clean Vinyl Fence
You can clean vinyl fences using a number of different methods and products such as soap, vinegar or even bleach.
There is no doubt that a white vinyl fence looks great in a lawn or backyard. It is also pretty low-maintenance. Its only downside is that it tends to get dirty very quickly.
Continue reading to find out the various ways you can effectively clean it.
Also Check: How To Remove Molds From Leather
Cleaning Solutions For Mold Removal From Vinyl Siding
Excellent vinyl sidings cleaning solutions are available in the market, and they often attack molds effectively. However, if youre someone whod opt for a more clean and environment-friendly cleaner alternative, weve got something for you as well.
And the best part is that these alternatives are mostly DIY cleaners and impressively cost-effective. Lets jump into this section to have a look at these amazing mold cleaners!
How To Remove Green Mold From A Deck With A Pressure Washer
A power or pressure washer is an ideal tool for cleaning the wood on your deck. However, there are some things you should know to prevent damaging the woods surface while cleaning. The following method requires a detergent for pressure washer.
- Power washer
If you do not own a power washer, you can easily rent one for the day at many home improvement centers such as Home Depot. Begin by removing all furniture from the deck and sweep away any debris. Add the deck cleaner to the pressure washer per the manufacturers instructions.
Begin at the farthest corner of the deck and start up the washer. Make sure you are using the soap dispensing nozzle, and use a sweeping motion to distribute the cleaner across the deck boards. Many people find that is very labor-intensive, unless your deck is a small one.
Use a scrub brush to work the cleaning solution into moldy areas and corners. This method is also highly effective and the best way to clean black mold outdoors. A pressure washer is not usually practical when getting rid of black mold indoors.
Switch to the widest sprayer nozzle on the washer. Hold the nozzle two feet from the surface and move with the wood grain while using a sweeping motion as you move along the deck.
Finish up by giving the deck a thorough rinsing with clean water. After power washing the entire wood deck, you may want to apply a deck sealer if it hasnt already been done.
Also Check: Clean Mold Off Basement Walls
What Materials Do You Need
Power washing is often touted as the way to clean a vinyl fence. However, if you dont have a power washer, never fear. You probably already have the only tools you need to clean your vinyl fence. They are:
- Your garden hose
- A gallon bucket
- Soap If you have the ingredients available, you can make your own mixture of powdered laundry detergent, powdered household cleaner, liquid bleach, and water. Otherwise, you can simply purchase a solution formulated for cleaning vinyl.
- A brush with stiff bristles
Clean Vinyl Fence With A Pressure Washer
A pressure washer is one of the most effective tools you can use to clean your vinyl fence until it is spotless. This device will be your best investment ever as it will clean all the surfaces in half the time needed by the other methods.
You also have the option of choosing between a variety of pressure washers in the market.
Some are gas-powered while others use electricity. There is also a bit of difference between the strengths of different washers.
How To Use a Pressure Washer
We suggest using a nozzle type of pressure washer or one with a wand mechanism for water ejection. Start with a small segment of your fence, moving from top to bottom. Hold the nozzle firmly with both hands at least 3 feet from the fence and direct the beam of water perpendicular to it. By bringing the nozzle any closer to it, you risk damaging the rather fragile vinyl fence.
Wet your fence first then add cleaning solutions to the washer and spray your fence with it. Allow the washing solution to sit on your fence for three to four minutes. This time is needed for the dirt and grime to dissolve properly.
Some annoying stains might also need you to scrub them off using a washcloth. A bristled brush also works great for these stains. Change the mode of the pressure washer to rinse mode and wash the fence with clean water, moving from top to bottom.
Keep doing small sections of the fence in the same manner until the whole fence is clean.
A Word of Caution
You May Like: How To Remove Mold In Bathroom Ceiling
Can You Paint Over The Mold
While many painters suggest painting over to hide the molds and green algae, in my opinion, you should NEVER do that because its not a long-term solution.
If you paint your wood fence without removing the molds and moss, the problem will return soon as it has not killed the exact roots of the fungus.
Even worse if you use water-based paints they can serve as a food source for molds and fungus which will keep on developing even more problems in the near future.
Also, it keeps on damaging your cedar fences, and the cost of fixing will increase gradually.
In the long run, you will be bringing down the value of your property just in case you are planning to sell it in the future.
Cleaning Organic Stains Like Mold And Mildew
Bleach is an excellent product that can be used to clean mold and mildew from vinyl fence. Weve already discussed how to go about that.
And weve already established that organic stains and cleaning them with bleach takes effort. To avoid having to take that effort, it is better to prevent mold on vinyl fence in the first place.
Algae, mold, and mildew grow on your fence if it doesnt get sunlight. The sun is a natural vinyl fence protector. In humid weather, the sun isnt as effective. So you can use store-bought protectors or use vinyl-safe paint to avoid the growth of these water-hungry organisms that leave green or yellow hues on your white fence.
Read Also: How Do You Remove Mildew From Leather
The Best Way To Clean Vinyl Siding
The best vinyl siding cleaning solution uses gentle products such as dish soap and water, or vinegar and water. Or, you can purchase a commercial vinyl siding cleaner to do the job. Apply the solution and clean the siding using a soft-bristled brush or microfiber cloth, then rinse off with a spray hose. Start from the bottom, working your way higher.
Rinse Away Cleaner With Water
To ensure a truly clean vinyl fence, allow the detergent to remain on the surface breaking down dirt for 2-5 minutes. When the time is up, return to your pressure washer or hose and rinse the fencing panel. Use a light spray with the 40-degree nozzle tip or your host. Any water pressure too hard may damage your fence.
You May Like: Cleaning Mildew Off Bathroom Ceiling
Borax Solution For Cleaning Mold Off Vinyl Siding
Another cleaning recipe that is highly effective at cleaning mold and mildew from vinyl siding is a Borax solution applied with a soft brush. Borax can also be part of a permanent remedy for black mold treatment on vinyl siding or to clean mold from wood on your deck.
- 1 cup Borax
Mix household Borax in hot water and use it to clean and scrub areas with mold or mildew.
As a spot treatment, this Borax solution quickly kills mold spores and prevents the mold from returning to the area if used regularly. Keep a box of Borax around the house to use for cleaning or for a great natural remedy to get rid of ants.
The homemade siding cleaner and homemade mold cleaner for siding recipes Ive given you here should work for cleaning even the toughest vinyl siding messes.
The real trick is to clean your siding regularly, about once a year or more often if needed. By cleaning the siding regularly, stains dont have time to soak into the vinyl and dirt and grim clean up much easier.
A Fresh Layer Of Paint
If after all that cleaning and restoring you are still unable to achieve the clean white vinyl fence of your dreams, then repainting is always a viable option. Learn the basics of painting a fresh layer of vinyl in this section.
How to Paint a Vinyl Fence
Clean your fence thoroughly and dont allow any dirt or grime to stay on it. Apply an acrylic binder material to your fence and allow it to dry. Now apply fresh paint using a roller or a paintbrush. We recommend applying two coats of paint.
Allow one coat to dry first before applying the next layer. Take note that it will take at least 24 hours for one layer to dry thoroughly.
Don’t Miss: How To Clean Up Mold In Basement
S To Cleaning Your Vinyl Fence
- Mix your cleaning solution in your bucket.
- Using your garden hose, wet one section of your vinyl fence.
- Soak your brush in your cleaning solution, and scrub any areas that show staining. You do not have to scrub every inch of the fence!
- Rinse off both the soap and the residue youve removed with your garden hose.
- Repeat this process section by section until the entire fence is clean.
Thats it! Simple, right? If you regularly hose down your fence, the less scrubbing you will need to do. Caring for vinyl is remarkably easy, and thats exactly why vinyl has become such a popular fence material. With vinyl, you can just relax and enjoy your fence with only minimal effort.
Do you agree that its easy to take care of vinyl? Whats your favorite method for cleaning vinylpower-washing or scrubbing? Do you have any tips for removing algae from vinyl fences? Feel free to share in the comments below!
To order fence parts or schedule professional installation, call or contact us online!
A Basic Maintenance Is A Must
Fences dont appear to be something that needs continuous care in your yard, but they surely need. This is particularly important when it comes to avoiding the growth of mould.
As above, there are some advice on how mould can be removed from a vinyl clasp, but some of the same things also apply to mould prevention.
The provision of a once weekly vinyl valve with a tubing and water will assist wash out any of these germs even before there is a sign of mould growth.
Mold does not necessarily develop on vinyl itself, but is usually attached to other vinyl substances: water, tree sap, mildew, dust, and other waste. The sprinkling of the fence and the removal of all the other things will thus assist to avoid the growth of the mould.
Now make sure its a bright sunny day when you spray down your fence. You may provide an even better place for the mould to develop on your fence if you give the vinyl fence a good wash and there is no sun to dry it. Do this only if you know the sun is going to shine.
Most microorganisms, including mould, are killed by Bleach Bleach. It removes mould while it is already developing, as described above. But it prevents it from forming in the first place if you wash your fence with a bleach solution before you see a mould!
Rather than wash your fence with a scrub brush, put the solution in a spray flask and spray the fence using bleach as a preventive precaution.
Don’t Miss: How To Get Rid Of Mold On The Ceiling
How To Remove Mold From White Vinyl Fencing
Mold removal can be an incredibly difficult process. Its best to get professional help, but if youre really dedicated to removing your moldy fence yourself, there are a few things to keep in mind.
Here are the steps I recommend:
1) Scrub the moldy area with bleach or vinegar and water. Make sure you wear gloves and do this outside or in a well-ventilated space.
2) Take off any sealant layers.
3) Apply your cleaning solution generously over the area where the mold is .
4) Let it sit for 5 minutes before rinsing it off with clean water.
5) After that, go ahead and reapply a new sealant. Make sure to let the fence completely dry before you do this!
6) After the sealant has dried, you can then go ahead and paint your fence.
But in all seriousness, unless you have experience with removing mold from vinyl fences, I would really recommend getting an expert to take care of your moldy fence.
Use A Simple Cleaning Solution
This is one step up from using a Mr. Clean Magic Eraser. It will clean most of the same basic stuff as a magic eraser, but it will do a better job of getting into cracks and crevices. For this method:
- Combine a small amount of dish soap with a bucket of warm water
- Agitate the water until its nice and sudsy
- Dip an old dish towel or washcloth into the water and then scrub away
If youve got a few stubborn stains that are hanging on, try using a non-abrasive scrubber.
Recommended Reading: Get Mold Off Ceiling
How To Keep Mould From Growing On A Vinyl Fence
A vinyl fence requires almost little upkeep. It will never need to be refinished, painted, or sealed. Even our rainy Pacific Northwest weather will not harm one of these tough fences.
What may dull the gleam of a white vinyl fence? White vinyl fences, like cedar wood fences, are vulnerable to mould development and can discolour over time. In truth, while many people believe that white vinyl fades and changes colour with time, the colour is usually caused by something growing on the surface of the material.
Fortunately, a dirty fence is a transitory issue that is simple to resolve.
You can remove nearly any degree of stain and keep your vinyl fence looking like new with little effort and no harmful chemicals.
Mold can be an issue with any fence, but with vinyl, there are a few simple fixes and ways to avoid it.
Wash or spray down a vinyl fence at least once a week to keep mould at bay. Mold may be a persistent problem if the weather is wet or the air is humid. If this is the case, spray the fence with a mold-resistant spray every season.
There are some simple fixes for mould on your fence, and we have two for you.
Use A Specialized Cleaner
Some stains can be stubborn, and the worst ones are iron and mold. For red iron stains, try using a specialized vinyl fence cleaner. We dont have a particular one we recommend, but you can find many effective options online or at a home improvement store. For all other tough-to-get-out stains, try using a xylene cleaner. Youd be hard-pressed to find a more powerful treatment.
You May Like: How To Clean Mold Off Canvas
From Durables Vinyl Railing To Illusions Vinyl Railing Keep Your Deck Railing Design Stunning
Vinyl and composite deck railing systems are a beautiful addition to any home and is a low-maintenance method for increasing security around your family’s outdoor space and highlighting the architectural beauty of your home with timeless, traditional looks. With no need to paint or readjust your deck railing ever again, vinyl deck railing lines will last for decades and allow you more time to relax on your deck rather than working on it.
While being an incredibly effortless deck railing design to love, the occasional cleaning will help keep your vinyl deck railing system looking like the clean, pristine dream deck railing you’ve always wanted.
Common Soap With Water
Cleaning vinyl fence with good old soap and water will forever remain our favorite method. It will remove most dirt stains if applied regularly enough.
How To Clean With Soap and Water
Take at least a gallon of water and add one tablespoon of dish washing soap to it. We suggest you use biodegradable dish soap to protect the plants around your fence.
Fill a bucket with the water and mix the dish soap in it. Use a hose with a nozzle to spray this mixture on the vinyl fence.
Next, take a cleaning microfiber cloth to remove stains from the vinyl fence. Apply enough pressure that all the fence panels are cleaned properly. Rinse with clean water afterward.
Also Check: Remove Mold Bathroom Ceiling
Clove Oil For Killing Mold Spores
If you have tough areas of mold that dont respond to bleach or vinegar, this environmentally friendly method kills the spores so that you can wash them away. It also prevents the mold from coming back by killing the embedded mold spores.
You can also use this clove oil mixture on lawn furniture and cushions that have become moldy. Try it before you spend the money to buy new furniture.
- ½ teaspoon of clove oil
Clove essential oil needs time to work. For this method, spray the mixture onto spots of mold and leave it overnight to kill the mold. Rinse the area the next day and use one of the detergent-based cleaners above to scrub the spot.
The mold should be completely eradicated. This method uses only a tiny amount of clove oil, but it is powerful.