Two: Assemble Your Supplies
While some people use bleach to clean up mold, we recommend purchasing a fungicide like Foster 40-80. Youll also need sheets of heavy plastic and tape to seal off your work area, heavy plastic bags for removing moldy materials, an N-95 face mask, gloves and other protective clothing, a spray bottle of water, and a scrub brush or rag for cleaning moldy surfaces. You may also need disposable paint brushes and a product for encapsulating mold, like Foster 40-50. We also recommend a vacuum with a HEPA filter, especially if youre performing mold remediation over a large area. In addition, youll need whatever tools and materials are necessary for removing and replacing moldy materials that cannot be cleaned, such as new drywall or new carpeting and the tools to install it.
How Does The Mold Remediation Process Work
Its Tuesday night, and your partner utters those four little words no one ever wants to hear: Honey, we have mold. What should you do? First, you should photograph the damage for insurance, record keeping, and any mold fans on your Christmas card list. Then you should contact a professional mold remediation and repair company. The mold remediation process is a job that should almost always be completed by trained professionals. These are the five steps those pros will likely take when they show up to rid your residence of mold.
Can You Stay In Your House During The Mold Remediation
We recommend leaving your house during the mold remediation process.
If that is not possible, the professionals working to remediate the mold will contain any areas that have mold present, so depending on the location and severity of the mold it may be possible for you to stay in your home during the process.
Mold spores are the most active and dangerous during the mold remediation process because they are inadvertently brushed into the air. The mold remediation professionals wear sufficient protective gear during the mold remediation process to protect them from health hazards.
This protective gear includes glasses, gloves, booties, and face / breathing masks.
The professionals will filter the air in the home when finished, so it will be completely safe to return to your home after the mold remediation process is completed.
You May Like: How To Get Your House Checked For Mold
Gear Up For Protection And Observe Safety Precautions
More than anything else, when you are dealing with mold, it is important that you protect yourself from its harmful effects. A thin mask will not help. You will need to wear clothes that you can immediately wash or better yet, you can just get rid of after using them. Remember that the mold odor can be strong especially if the mold is thick and clustered. You dont want to be smelling that, right?
Mold can stick on your clothes and may spread to your other clothes if you wash them together with other clothes in the washing machine. So instead of washing it, wear clothes that you can throw away after you soil them. You will need to wear goggles and gloves. You need to protect your eyes from these particles. It is dangerous for them to reach your eyes and not wearing protective gloves when cleaning might allow mold to stick to other parts of your body. May we suggest you do not eat if you have not showered after general black mold remediation.
Do not remove this in the process of cleaning. Turn off your furnace and air-conditioner when you are dealing with molds. We dont want those spores spreading all over the room or even the house and causing some breathing and respiratory problems. You can also seal the door gaps to prevent any particles from spreading to the other room. Prepare your bleach, brushes, rags, gloves, disinfectants and everything you need for the cleaning process.
What Is Involved In The Process Of Mold Remediation
Home » Blog » What is involved in the process of Mold Remediation?
Contents
Mold remediation is a process of containing the affected area to prevent cross-contamination, following step-by-step processes that are proven to return the affected environment back to a healthy and safe environment, and then obtaining 3rd party post-remediation test results to guarantee a successful mold remediation was done. If you are considering starting a mold remediation project in your home or business, be sure to consult with a professional first.
Don’t Miss: Who To Call For Mold Issues
How Do I Fix Mold In My Home
If you think there might be mold growing in your home, its important to take steps to identify and then remove it. However, mold remediation isnt something you should do on your own.
If mold levels are abnormally high as determined by indoor air quality testing or an inspection, remediation is recommended. This should be carried out by a professional remediation company with certified, trained professionals who have experience removing and cleaning-up mold from an indoor environment.
Who Can Be Affected By Mold In Their Home
Children: Little ones are still growing and are more susceptible to the toxicity in fungi.
Elderly: As people age, their bodies break down and their immune systems deteriorate, which makes it difficult to fight mold toxicity.
People with compromised immune systems: This could be a result of a disease or condition, or even poor health due to lifestyle choices.
Individuals with existing respiratory conditions, such as allergies or asthma
Pets: Yes, even your family dog could be negatively affected by mold in your house.
Don’t Miss: How To Get Tested For Mold Exposure
Disposal Of Mold And Supplies
Mold can easily spread by coming into contact with other organic material. Proper disposal of cleaning materials as well as protective gear is another essential step in true mold remediation.
Any materials used during clean up should be sealed in a thick plastic bag.
Bags should then be sealed in another plastic bag to ensure the mold spores are contained and then properly disposed of according to your areas recommendations. Professionals will complete this step as a part of the mold remediation process.
What’s The Difference Between Mold Removal And Mold Remediation
Many people often confuse mold removal and mold remediation. While they are both important steps in addressing a mold problem, they are actually quite different. Mold removal is the process of physically removing mold from a surface, while mold remediation is the process of cleaning and repairing the affected area to prevent future mold growth.
You May Like: How To Treat Exposure To Mold
Document The Mold Problem And Create A Mold Remediation Plan
Before you begin mold cleanup and mold removal, document the mold situation with writing, photos, and video. The warranty team supervisor will use the documentation to develop a remediation plan, which typically answers questions such as when work is slated to begin, when that work is scheduled to be completed, who will be performing the remediation, any testing that should be done, and if homeowners will be temporarily relocated.
In the longer term, the documentation can help manage liability for your company or point to larger trends in mold growth.
Why mold in the home is a problem:
Why Choose Puroclean Of South Riverside
If you are experiencing an increase in indoor allergy symptoms or notice the presence of green or black mold in your business or residence, contact PuroClean of South Riverside immediately. Upon arrival, we will evaluate the situation and provide you with the best mold remediation plan for your workplace or household. We will contain the area to stop mold growth, prevent it from spreading throughout your property, and use HEPA filtration and HEPA vacuuming to remove the mold. Our trained technicians will also determine the molds moisture source, deodorize the space and apply preventive measures as needed. Dont hesitate to contact PuroClean of South Riverside today at .
Recommended Reading: Is The Mold In My Basement Dangerous
When Is Mold Remediation Required
Mold remediation is needed when your mold problem is covering a large area. Large quantities of mold are hard to eliminate and can spread to other areas of your home quickly. Mold remediation is required to stop the progression and ensure it has been completely taken care of.
Another reason mold remediation would be required is when the mold has been growing for a long, or unknown, period of time.
If you have recently encountered a large area of mold growing in or around your home, it has probably been there for a long time. This is especially common for crawl spaces, attics, or other locations that you do not utilize regularly.
Mold that has had more time to grow will grow deeper into the surface and be harder to take care of on your own. Professional mold remediation will be able to attack the source of the mold and stop it from causing further damage.
When To Call A Mold Remediation Specialist
Attempting to remove mold by yourself without proper containment will trigger mold spores and cross-contaminate clean, unaffected areas.
For inhabitants safety, it is advised that you leave the handling of mold contamination to experts. Experienced mold remediation experts will conduct a safe process that preserves your propertys structural integrity without jeopardizing the health of its occupants.
Recommended Reading: How To Clean Shower Tile Grout Mold
Four: Set Up Air Pressure In The Work Area
Negative pressure in the work area causes air to flow out of that area, usually outdoors, thereby preventing airborne mold spores from spreading to other areas of the home. You dont have to set up negative pressure in the work area but its a good idea, especially if youre dealing with a large amount of mold. You can create negative pressure with a high performance shop vac. After using sheets of heavy plastic to create barriers around your work area, put the shop vac with intake and exhaust hoses attached in the work area. Make a small hole in one of the plastic sheet barrier walls and extend the exhaust hose through the hole and out the nearest window. Use duct tape to seal the opening around the hole in the plastic sheet barrier wall and around the window.
This article explains the importance of airflow during mold removal.
What Are The Basic Mold Cleanup Steps
For more information on mold cleanup, see:
You May Like: Does Wet And Forget Kill Black Mold
Clean Up And Removal Of All Mold
Next, the mold will need to be removed and cleaned as much as possible.
After scraping off as much mold as possible, professionals will use a cleaning solution and a wire or firm bristled brushes to scrub away the remaining mold. Some staining may remain depending on the size and severity of the mold.
Cleaning up a large mold growth is usually the longest step in mold remediation. Proper mold removal is essential to mold remediation and to prevent further mold growths.
Can Mold Be Completely Removed From A House
However, the reality of mold is this: Even though some mold can be removed from the home by cleaning thoroughly and taking out rotten materials,it can never be removed completely, which is why getting rid of it is often referred to as mold remediation. The important thing is to handle a mold issue promptly to help
Read Also: How To Get Mold Mildew Out Of Clothes
Where To Find Mold Remediation In Marietta Ga
If you are in need of mold remediation in Marietta, GA, the right company to choose is Zen Dry. We are specialized in mold remediation and can assist you to get rid of mold and improve the quality of your life. Browse our website for more information and if you require more assistance, contact us, our team is ready to help you 24/7.
Can Mold Come Back After Remediation
Mold growths are mostly due to moisture from water faults or high humidity levels. Also, water from floods or leaks can result in active mold growth in just a few days.
Before you hire a mold remediation service, it is crucial to address any water or moisture problem in the house to avoid mold regrowth after remediation. Leaks such as those from faucets or ceilings should be fixed, and groundwater intrusion should be thoroughly cleaned and dried.
Also, taking the advice of mold professionals for preventing mold growth will help you avoid mold recurrence after remediation.
Don’t Miss: How To Kill Mold On Mulch
What Is A Mold Remediation
You might have wondered: What does mold remediation mean and what is involved?
Mold remediation is the term used to describe all the processes involved in eliminating harmful mold growth. It includes mold testing, removal, demolition, sanitizing, containment, and mold cleaning, depending on the type and location. A professional restoration company that understands mold growths critical nature will offer remediation to get the mold levels in your home back to a harmless point rather than a false promise of complete mold removal.
Summit Restoration Is Here
At Summit Restoration, we know that mold remediation is important to get your life back on track after a water event has occurred. Thats why were here to respond to your emergency 24/7. We specialize in mold and water damage repair and restoration, fire restoration, and more. We serve Utah clients throughout Utah County, including Lehi, American Fork, Orem, and Provo. Contact us today!
Also Check: Are Mold Test Kits Accurate
Theyll Assess The Situation And Form A Plan Of Attack
If theres visible mold in your home, that often means that theres hidden mold as well, such as under rugs and behind drywall. The first step in the mold remediation process will be to perform a thorough inspection of the affected area to figure out just how large the issue really is. If the contamination is minor, this visit will likely be brief. If the mold growth has spread, however, or if those rugs and that drywall need to be removed, this first step can take longer.
A mold sample may be taken, too. In some circumstances, this is a necessary step for pinpointing the level of contamination that the remediation company will be dealing with. If members of your household have significant respiratory conditions or other health concerns that are aggravated by mold, a sample may be in order as well.
Once the remediation team has gathered all the intel and evidence it needs, it will use it to form a plan of attack for removal, cleanup, and repair. This strategy should be explained to you in-depth, and you should feel free to ask the removal team members any questions, or express any lingering concerns, that you have about the process.
How Much Does It Cost
Mold remediation projects can cost quite a bit of money. Having mold in your home is not an ideal situation for anyone. Keeping up with regular home maintenance is key to not having to spend so much money on mold remediation.
The average cost range of mold remediation ranges from $1,370 to $3,325 with $2,347 being the average. This all depends upon the square foot of the home and how much mold has grown in the home. Its possible that you get lucky and the mold is isolated in a small area such as a bathroom. That cost is around $458 and likely wont cause you to leave the home.
Read Also: Can Mold Cause Intestinal Problems
Before Someone Gets Estimates For Mold Removal How Does Someone Determine If It Is Really Mold Without Sampling And Testing
I preform mold testing and other testing. I go to the client’s home and do the visual and the actual sampling. I send the test results to a certified laboratory. When the results come back I go over them with the client. I offer suggestions and advise to them on what to do next. Some mold problems can be resolved by the client. Some mold has to be professionally removed. I help the client make the best decision possible. I do not do remediation for this to me is a conflict of interest. My advice is use one company to do the inspection and testing and another one to do the removal then have a follow up test to be sure the problem is solved.
First of all, let me ask some questions to you.
can you determine if something is mold and are you willing to stake your reputation on something is mold without having it tested by an accredited lab?
I hear quite often that something is mold and only to find out later after having the suspected area tested from an accredited lab, that it is not mold. So, if something is not mold why would anyone want to have a mold removal performed and spend money on something that he or she thinks might be mold without testing?
Also, do you know of anyone who can look at something to determine something is mold without sampling and testing from an accredited lab? Is he or she willing to put there reputation on the line, without testing first?
Smell, black powdery substance, most common.
