Shower Caulk Mold Removal
When black mold is noticeable on the shower caulking, take the following steps to stop the growth process and remove the mold from shower caulking:
Act Now and Remove Mold from your HomeCall a Professional Mold Remediation Specialist or Get Up to 4 Quotes Now.
Step 1: Protect yourself by wearing the recommended gear listed below.
Step 2: Ventilate the area by opening windows and the bathroom door. Turn on the bathroom ventilation fan and open a window, if possible. Keep the bathroom door open.
Step 3: Mix one cup bleach with one gallon of water.
Step 4: Fill a spray bottle.
Step 5: Remove towels from the area to prevent spots on the fabric.
Step 6: Spray the area that has visible black mold.
Step 7: Wait 30 minutes and then rinse with fresh water.
If the mildew does not wipe away, it could be growing within the caulk. If the mold has penetrated the caulk surface, the only answer is to remove the caulk and replace it with mold resistant caulk designed for bathrooms.
During this process, if you begin to feel light-headed, leave the area for a few minutes. For extensive jobs, work in small increments of time to reduce the impact of the cleaning solutions.
How To Remove Mold From The Showerdrain
This is by far the easiest moldremoval task in the shower.
- Remove the shower drain cover if there is one. If not, skip to step two.
- Spray the drain cover and/or the drain rim, inside, and stopper with peroxide.
- Allow it to sit for a few minutes.
- Using a toothbrush or the like, scrub all the mold you can see off the drain and components.
- Rinse well, dry, and replace the drain cover.
- Spray the drain generously with EC3 Mold Solution Spray.
- Allow it to air dry.
And there you have it! Everything you need to know about black mold in the shower! Be sure to check out my post on how to prevent bathroom mold. Its important to take all the steps necessary to keep mold and mildew from sneaking up on you in the bathroom.
In this post I refer to EC3 products. They are one of the only two mold and mycotoxin removal products that I personally use and recommend. Please read my article outlining what makes EC3 superiorwhen it comes to killing mold and mycotoxins. It has been independently lab tested and proven to be 99% effective when used properly. I encourage you to purchase EC3 products directly through Micro Balance. If you prefer to shop on Amazon, Micro Balance has a presence there as well.
Clr Mold Remover Spray Additional Info
CLR Bath and kitchen cleaners remove hard water buildup, calcium deposits, lime, and dirt from kitchen and bathroom, and shower surfaces without scrubbing or using several different products. These versatile Multi-Surface cleaner foams remove even the toughest buildup from sinks, faucets, showerheads, and bathtub surrounds.
CLR Mold and Mildew Stain Remover is a powerful, biodegradable cleaner that uses a unique combination of enzymes and other natural ingredients.
This product is ideal for cleaning mold and mildew stains from hard surfaces such as baseboards, brick, ceramic tile, concrete, fabric, fiberglass, glass , grout , marble/granite countertops , painted walls and wood. Its also great for removing soap scum from tile floors and showers.
Made in the USA with quality ingredients it is certified by the environmental protection agency design for the environment.
CLR is part of EPAs Safer Choice Program recognizing the product as a safer alternative to traditional chemicals. CLR mold remover spray is the right solution for mold and mildew removal.
Read Also: How To Test For Mold Toxicity In Blood
How To Clean Mold On The Ceiling Above The Shower
Cleaning mold along the front surface of the ceiling can be done in a few easy steps:
Step 1: Get a mild detergent or anti-microbial mold cleaner as well as a rag. Turn on the ventilation fan.Step 2: Apply the solution very lightly to the areas you would like to clean and allow to sit for 5 minutes. Do not soak the area.Step 3: Gently dab the affected areas with the rag.
The should be enough to clean mold off the shower ceiling.
If there are still stains, the area may need to be sealed with anti-microbial paint.Using paint with an anti-microbial additive can deter mold on the shower ceiling.
Alternative Ways For Shower Caulk Removal
- Hydrogen Peroxide hydrogen peroxide is an anti-fungal, anti viral and antibacterial solution. Putting some hydrogen peroxide on a sponge or scrub brush and scrubbing the black mold would remove the it from the caulk.
- Vinegar Vinegar can kill 82% of mold species. Vinegar is a mild acid that can be used to kill the fungus. Spray the vinegar onto the caulk sealant and let it sit for about an hour. After the hour has passed, come back and scrub the vinegar from the caulk. This will remove and kill the black mold.
- Baking Soda Baking soda will not only kill the black fungus, but it will absorb some of the moisture to help keep it from coming back. Simply put a quarter teaspoon of baking soda into a spray bottle with water. Shake the bottle until it has dissolved. Spray onto the sealant and scrub with a scrub brush until it is removed, then rinse with water. Then spray the area again and let it dry to help prevent it in the future.
Don’t Miss: How To Get Rid Of Mold On Bathroom Walls
Ways To Prevent Shower Mold
Dry Every Surface You Can
After youre done showering, look for areas where water likes to linger, such as shower tiles. Make sure to dry off the excess water this stops mold from being able to grow. On tiles and glass doors, its best to use a squeegee. You can use a dry cleaning cloth for narrow areas. Even a small puddle of water can encourage mold to grow.
You May Like: How To Remove Mold From Canvas Tarp
Mold Cleaning Trick #: Vinegar
Vinegar has been found to kill 82% of mold species! Plus, it is great at preventing mold in the first place. Vinegar contains no toxic fumes like many other agents used to kill mold, such as bleach.
- Pour mild white vinegar into a spray bottle, do not dilute with water. Vinegars acidic qualities make it quite deadly to mold, thats why you dont want to water it down.
- Spray affected surface areas with straight vinegar solution and then wait one hour. If your bathroom has windows, open them up and let it air out during this time.
- After an hour passes, use hot water and a clean towel to wipe the area. Make sure surfaces are dry to prevent mold from coming right back.
Vinegar isnt always strong enough to get rid of mold on its own, but it is great at preventing mold from growing in the first place. Keep that spray bottle of vinegar in your bathroom at all times and use it to spray surfaces prone to mold whenever they get wet. This makes it difficult for mold to grow, which means you wont have to waste time removing it in the first place.
How To Remove Mold From Shower Grout
Now, you might be wondering how toclean mold in shower grout naturally. Valid question seeing that everyonerecommends bleach. This is where there is no one size fits all shower moldcleaner so let me share my three methods.
For each of these methods you will need this electric scrub brush. Trust me. It cuts your cleaning time down by hours. You are welcome to put some elbow grease in there and use a scrub brush like this but be sure you have a lot of free time.
Make sure you are wearing gloves when you remove mold from shower grout.
Also Check: How To Tell If You Have Toxic Mold
How To Remove Mold From Grout
Fortunately, there are several cleaning agents that work to remove mold from the grout between tiles. When cleaning the grout between tiles, first check to make sure the cleaning agent you use won’t cause any damage to that specific kind of tile. Some tiles should not come into contact with bleach or abrasive agents like baking soda.
Cause Of Black Mold In Bathroom
The main reason black mold infests your bathroom is due to the humidity and plentiful supply of water. Such condition provides the perfect ground for mold development.
Water coming out from basin, bathtub, and shower will create wet surfaces that are claimed by black mold as the place for it to live in.
In addition to water supply, another cause of black mold infestation in the bathroom is related to the steam evaporation. If you like using warm or hot water in the shower, the chance of black mold growing in your bathroom increases.
The bathroom does not have well ventilation system compared to other rooms in the house. It also becomes the cause that can increase humidity from the steam and water circulation inside the bathroom.
Also Check: How Do You Get Tested For Mold Toxicity
Use A Toothbrush To Scrub The Mold From The Caulk Or Grout
To remove mold from caulk or grout, scrub the area with a toothbrush using a back and forward motion. To prevent the mold from spreading to other areas of the shower, rinse the toothbrush with water after every few motions.
If you dont have an old toothbrush, a larger scrubbing brush will do. You can also buy a specialty grout scrubber, they usually sell them in hardware stores.
Does Bleach Kill Mold
In and of itself, bleach is a highly toxic substance. It should never, ever be mixed with ammonia as it produces toxic and even deadly fumes. Does bleach kill mold? Yes and no.
Bleach does work on killing mold on non-porous surfaces such as tile or porcelain. It does not work on porous surfaces like wood or drywall. It also only kills the mold on the surface. Bleach does not reach the roots, which means the mold will grow back.
According to the EPA, The use of a chemical or biocide that kills organisms such as mold is not recommended as a routine practice during mold cleanup.
Read Also: Is It Bad To Breathe In Mold
And Product : Mold Mildew Cleaner Gel
Here is a very common thing to see. My old mid-80s white tile in my guest shower and bathroom has accumulated black mold over the years. And of course, I have been lazy at cleaning it, and my roommates I had didnt clean it either.
Normal shower and bathroom cleaning mold and mildew removable sprays would not work. All the scrubbing in the world wouldnt work.
Then I found this Mold MildewCleaner Gel from Gelivable. It was a bit expensive but worth it. I liked the idea of the cleaning gel staying put on the grout instead of running down and not staying on the actual black moldy grout lines.
To use the gel, remove the cap, and then squeeze a bead of gel over the moldy areas. The gel will stay put. Then all you do is allow it to work its magic. Allow it to stay on the black mold for at least 5 hours, you may need to let it stay even longer.
This black mold spot on my shower tile had been there for many years. So I left the gel on for about 8 hours.
The results were absolutely remarkable. Years of caked-on hard-to-clean, stubborn black mold, gone. Next, all you do is wipe it off with a damp paper towel or washcloth and then rinse it really well.
There you have it, method 1 is a super success for this particular type of black mold situation.
Mold Removal From Fabric
Its easier than you might think for clothes to attract mold and mildew. A forgotten load of laundry in the washing machine, the pile of clothes at the bottom of a closet, or even the armchair in a humid room can all quickly become overrun with mold. However as long as you catch the problem early, your fabrics can still be saved.
If you can apply bleach to a fabric without worrying about discoloration, do it. Thats the fastest and most effective way of getting rid of mold. Many laundry bleaches can be used on white and colorfast fabrics, although you should always check the instructions, and never use bleach on wool or silk. Simply apply a solution of one part bleach to three parts water and let it absorb into the fabric for a few minutes before laundering as usual.
For fabrics that cant be bleached, use white vinegar instead. Either apply white vinegar to a cotton pad and place it on top of the stain for five minutes before laundering, or briefly soak in a solution of ¼ cup vinegar to one gallon water. Rinse through to remove the vinegar and launder as normal.
Related: All about cleaning fabrics
You May Like: Can Black Mold Be Removed From Wood
Mold Armor Spray Additional Info
Mold Armor is a water-based, odorless, and non-toxic cleaner that kills mold and mildew. Its safe to use in any indoor or outdoor environment.
The EPA has tested the product for effectiveness against all types of mold and mildew at an EPA-approved laboratory.
This product has been tested and proven to work in places of high humidity and deep penetration, like under kitchen sinks, bathrooms, basements, and more!
The most satisfying part? MOLD ARMOR kills 99% of all mold spores within 24 hours AND leaves behind a protective barrier against future growth, so now you can say goodbye to those pesky black spots on your shower curtains!
Unlike other products, you dont have to scrub your shower with this cleaner! This formula kills mold and mildew on contact. No scrubbing is required! Spray it on the surface you want to clean and let it do its thing!
For best results, apply every two months after cleaning with the Mold Armor Mildew Stain Remover.
How To Clean Bathroom Mold And Mildew With White Vinegar
Mold, and its early-stage counterpart, mildew, are forms of fungi that grow in damp areas and replicate quickly. Mold and mildew can cause allergies and respiratory conditions, and sometimes more serious health problems that affect the nervous system. Therefore, you need to get rid of mold and mildew quickly. Bathroom surfaces, particularly tile around the tub and shower, tend to be mold and mildew incubators because of the heat and moisture that accumulate there. But you can usually remove the unwanted substances easily using white vinegar in combination with baking soda as a scouring agent.
Fill a small spray bottle with white vinegar.
Spray the affected areas — including tile, grout, painted walls, and any porcelain or ceramic surfaces — liberally with vinegar. Let it sit for one to two hours.
Scrub the mold and mildew away with a damp microfiber cloth. Scrub tiling grout or hard-to-reach corners and crevices with a stiff-bristle toothbrush. Rinse with water.
Make a paste of 3 parts baking soda to 1 part water. Apply the paste to any hard-to-remove traces of mildew or mold. Spray with vinegar, and scrub with a damp microfiber cloth, scouring pad or stiff-bristle toothbrush, depending on the severity of the mold or mildew.
Rinse the affected areas with water. Repeat Step 4 if necessary.
Things You Will Need
Scouring pad or microfiber cloth
Stiff bristle toothbrush
Read Also: How To Properly Remove Black Mold
Black Mold Removal Using Vinegar
White vinegar is a mildly acidic product that cleans, deodorizes, and disinfects. It can also kill 82% of mold species, including black mold, on porous and non-porous surfaces. You can use it safely on most surfaces, and its offensive odor goes away quickly.
Pour undiluted white vinegar into a spray bottle. Because white vinegar contains only about 20% acetic acid, adding water makes it less effective. Spray the vinegar onto the moldy surface and leave for an hour. Finally, wipe the area clean with water and allow the surface to dry. Any smell from the vinegar should clear within a few hours.