Mold Requirements And Standards For Licensed Professionals
Requirements and Standards for Licensed Professionals
Licensed professionals may only perform services they are licensed to conduct. Licensed professionals may supervise the work of no more than ten non-licensed individuals at one time.
All mold professionals must maintain a general liability insurance coverage of at least one million dollars, unless covered under an employers policy. Further information about the requirements pertaining to District of Columbia mold assessors and remediators can be found below.
The full set of regulations can be found here.
A licensed mold assessor is permitted to record observations, take measurements, collect samples, plan and conduct surveys, prepare reports, and develop and evaluate mold remediation and management plans. If the licensee deems it necessary, all those working on the assessment must wear personal protective equipment . An N-95 respirator is considered the minimum acceptable PPE. The licensee is responsible for providing PPE, fit testing, and training to all supervisees. All sampling and laboratory analysis must be done according to industry best practices, and proper documentation and chain of custody procedures must be used.
The individual performing mold assessment must provide the client with a Mold Assessment Report. If mold remediation is necessary, the report must include a Mold Remediation Protocol. This protocol must contain:
Louisiana Mold Remediation Professionals
These classes are designed to satisfy the State of Louisiana requirement for 24 hours of training PLUS 4 hours of “Unfair Trade Practices and Consumer Protection Law”. This proprietary class is unique to NORMI and provides the opportunity for the student to be licensed in the State and NORMI Certified concurrently. Each class requires a proctored examination and active NORMI membership to receive the certificate and a listing on the NORMIPro.com website. Read the description of each class carefully as you, as the student, are responsible for understand how the class is delivered and have the capacity to receive that training in whatever platform is required.
Notice Of Intent To Review Rules
The Texas Department of Licensing and Regulation is reviewing the Mold Assessors and Remediators program rules located at Title 16, Texas Administrative Code, Chapter 78 for re-adoption, revision, or repeal. This rule review is required every four years.
The Notice of Intent to Review was published in the Texas Register on September 3, 2021 , as part of a combined notice with several other rule chapters undergoing simultaneous review. The Department will determine whether the reasons for adopting or readopting these rules continue to exist by answering the following questions for each rule:
- Is it obsolete?
- Does it reflect current legal and policy considerations?
- Is it in alignment with the current procedures of the Department?
The Department encourages anyone interested in the Mold Assessors and Remediators program, under Chapter 78, to review the Notice of Intent to Review and the current chapter rules posted on the Departments website.
Comments may be submitted electronically on the Departments website at .
Deadline to submit commentsOctober 4, 2021.
Recommended Reading: Clean Mildew Off Ceiling
How Does The Law Protect New York State Residents And Business Owners
Work standards now in place for mold assessment and remediation in New York State include protection against fraud, identification of chemicals used , the provision of personal protection equipment for company employees, a posted notice of the project and the contractors licenses at the site and an assessment of completion. The licensed company will also:
- Prepare a work plan that is unique to each project before beginning the job.
- Fulfill all the requirements of the plan as provided to the client.
- Provide specifics as to how mold remediation will be executed.
- Keep a copy of the work plan at the job site at all times.
- Post signs advising that the project is in progress to be displayed at all accessible entrances to remediation areas.
- Assess the job after its finished and confirm the structure is free from mold.
There are some exceptions to the licensing requirements in New York States Mold Program. If you have any questions or concerns about mold testing and remediation, please check with your mold remediation company or the New York State Department of Labor.
Who Should Take This Class
- ANYONE interested in knowing more about mold
- Homeowners who want to make sure the job is done correctly
- Certified Mold Inspectors for more training
- Home Inspectors adding mold aspect to business
- General Contractors doing their own work
- Industrial Hygienists wanting more advanced training
- Environmental Consultants need more information
- Architects concerned about building Mold-Free buildings
- Contractors interested in licensure for Florida
- Contractor’s workers who need to know but do not need licensure
How Do You Get Certified For Mold Remediation
Mold certification requires you to take classes or independently learn about mold remediation and everything you need to know about the industry.
There are many different courses out there, from simple beginner classes to professional mold remediation classes.
There will be courses depending on what you want to go into. A shorter course will suffice for housing officials, building managers, maintenance workers or supervisors, and safety professionals. These will commonly last less than five hours.
Longer courses will last closer to 16 – 20 hours and will be best suited to project managers, property owners, and supervisors. However, its up to you which certification you get and which course you want to use.
There are also smaller courses to teach you more about different aspects of mold growth and remediation.
Once you have learned the correct syllabus and feel confident in your knowledge, you can take a certification exam. If you pass you will get your certification and begin putting your studying to the test.
However, if you fail you will need to retake the course and the exam once you know where you went wrong.
These courses and exams are paid for and therefore multiple failed exams could end up costing you more than it would have been to hire a professional, so get your pen and paper and get to studying!
What Is A Mold Certificate
A mold certification is a qualification that certifies you as a successful professional in the mold remediation industry, showing clients that you have met all of the state requirements.
Your certificate will show potential clients and lenders that you have enough training on mold removal to follow the correct procedures and practices that they will be happy with. With this training you will be able to:
- Remove mold in various structures
- Design and maintain containment options
- Control the pressure differentials
- Understand and implement legal requirements and industry standards
- Recognize different types of mold growth and deal with them individually
- Prevent regrowth
People with mold certification can follow the correct protocols and remove mold without being supervised or told what to do.
There are many different organizations that allow you to take the certification exam, each of which will train you and require you to know different practices of the industry.
It is incredibly important to shop around beforehand so that you know youre getting certified by the best.
Recommended Reading: How To Prevent Mold On Bathroom Ceiling
New York State Mold Licenses Who Is Required To Obtain One
Who is required to obtain a Mold Assessor License?
Any business that:
- engages in mold assessment on a project,
- advertises that it is a mold assessment company, or
- holds itself out as a mold assessment company.
AND any individual who inspects or assesses property for the purpose of discovering:
- conditions that facilitate mold, and/or
- any conditions that indicate they are likely to encourage mold.
Who is required to obtain a Mold Remediation Contractor License?Any business engaged in mold remediation. Mold remediation is defined as thebusiness of removal, cleaning, sanitizing, or surface disinfection of mold, moldcontainment, and waste handling of mold and materials used to remove mold fromsurfaces by a business enterprise, including but not limited to, sole proprietorship.
Who is required to obtain a Mold Abatement Worker Supervisor License?Individuals who draft Mold Remediation Work Plans and serve as mold site or projectsupervisors. Mold abatement is defined as the act of removal, cleaning, sanitizing, orsurface disinfection of mold, mold containment, and waste handling of mold andmaterials used to remove mold from surfaces by an individual.
Who is required to obtain a Mold Abatement Worker License?Any individual engaged in mold abatement. Mold abatement is defined as the act ofremoval, cleaning, sanitizing, or surface disinfection of mold, mold containment, andwaste handling of mold and materials used to remove mold from surfaces by anindividual.
Which States Require Mold Licenses
First things first: not every state legally requires mold remediators and assessors to be licensed. It might sound crazy, but the only places where an official license is necessary are New York, Tennessee, Louisiana, Texas, and Florida. That said, a mold license is still a helpful tool no matter what state you live in. It provides some evidence that you know what youre talking about, which in turn provides your customers with peace of mind.
If you plan on going into the mold business, we strongly recommend that you do your research, take the proper classes, and further your education in the field.
Read Also: How To Get Mold Off A Bathroom Ceiling
Mold Regulations In Californiaor Not
MOLD CONTRACTOR REGULATIONS IN CALIFORNIAOR NOT
Neither the State of California nor the California Contractors License Board regulates mold inspectors, mold assessors or mold remediators.
The state of California does not formally recognize any mold certificates including the IICRC certifications, the fact is all mold inspector, assessor and clean-up methods is up to the individual company and technician.
The mold guidelines most commonly used in California are taken from the EPA, OSHA, NOISH, NY DOH, CDPH research and guidelines which are all similar, we disagree with numerous IICRC recommendations and methods.
Even though California does not formally recognize any mold certificates we believe the NAERMC mold study and certificates are the most effective and comprehensive available, Gary Rosen, Ph.D.is the author.
NAERMC the states of Florida stringently regulates the mold industry, being state licensed is mandatory to work and contract in the mold industry, NAERMC is a primary study course for Florida mold inspectors, assessors and remediators, the study and testing are available to any state, we at California Certified Inspections studied, passed and are certified in all six NAERMC mold and water intrusion courses.
Who Is Required To Have A Florida Mold License
This question just cant seem to be answered by those that want to preform mold inspections or mold remediation and are on the hunt for a licensing loop hole.
So who in the State of Florida is required a have license to preform Mold Assessments and/or Mold Remediation. The answer is simple.
Anyone who advertises themselves as a professional providing mold assessments and/or mold remediation.
If you provide mold assessments and you advertise your company or yourself as a mold inspection company or inspector you must be licensed by the state as a mold assessor.
- You cannot add someone elses license number to your business card. Thats not legal, honest, or ethical. These actions will be reported to the State as unlicensed activity.
- You cannot call the collection of air samples for mold spores an indoor air quality test to avoid the need to obtain a mold assessors license. The collection of air samples for mold spores is a mold sample not an indoor air quality test so lets just be honest with our clients and call it what it is and get licensed.
- You cannot assess the extent of mold damage on a home where you intend to provide the remediation. The law is very clear on this and is one of the primary reasons for the law, conflict of interest. Just call an independent licensed assessor to provide an assessment and then you can provide your estimate.
So why did the state of Florida decided to require a license for mold related services?
You May Like: How To Remove Mold From Bathroom Ceiling
Mold Remediation In California
In California, the CDPH provides information on best practices for mold remediation in a workplace setting.
When it comes to actual training and certification courses, the most widely respected non-government affiliated association is the:
Mold Inspection Consulting and Remediation Organization
- For years they have set standards and offered courses for inspection and removal.
- These standards have been established by the nations most experienced and reputable mold removal experts.
There are several schools and associations around the country that offer mold remediation courses and certifications, find out which course makes the most sense for you depending on where you live.
Louisiana Mold Training Faq
Do I have to take a proctored exam with this class?
Yes, and the proctored examination is offered in a few different formats, online and onsite, at an additional fee.
Does Louisiana accept any other State’s Mold License
No, there is no reciprocity between Louisiana and any other state in regards to Mold Licensing. Also, under normal conditions, any contractor living in another state must wait sixty days before working the State of Louisiana. Under certain circumstances, like natural disaster, this provision may be waived. Check with the Louisiana Contractor’s Board before taking the course.
Besides the 24 hour course, is another four hour class required?
Yes, Louisiana required a four hour course on “Unfair Trade Practices and Consumer Protection Law” which is normally scheduled with the State. BOTH of our classes incorporate this requirement so that your NORMI certificate will read “28 hours of training)
You May Like: Cleaning Mold Bathroom Ceiling
What Does The Law Define As Mold
Mold refers to any multicellular fungi growth capable of creating toxins thateven with minimal exposurecan cause pulmonary, respiratory, neurological, or other, illnesses. A wide variety of events can fall under a mold assessment, and remediation regulated definition, so its best to be not only prepared and but well informed regarding what, and who, the law covers.
Why Should I Join A Non
There are several mold organizations to choose from, but some are operated by mold labs or mold training schoolswho profit from them. Operating for-profit creates a conflict of interest for any national association whose purposeis to protect and educate the public. PMII graduates receive a $149 paid membership in the National Associationof Mold Remediators and Inspectors , which is a non-profit organization.
You May Like: Cleaning Mildew From Bathroom Ceiling
How To Renew Your Mold License
License renewal laws vary depending on the state. However, mold licenses and certifications typically expire after 2 years have passed with no further education in the industry.
All that means is that to keep your license, you must take a training course by an accredited mold assessor and remediator before your license expires. Additionally, you will have to fill out a simple renewal application and pay a renewal fee. If you are late in renewing your license, you might have to pay a slight late fee.
If you dont live in a state where mold licenses are legally required, renewing your license serves a different purpose. First, it shows your clients that you care about furthering your knowledge. It makes you more trustworthy, knowledgeable, and reputable. Second, it actually does further your knowledge. The most important quality of an independent contractor is the desire for growth. Unfortunately, you cant grow without learning.
What It Means For You When You Hire A Licensed Mold Remediation Company
Hiring a licensed mold remediation company to handle your mold problem gives you certain guarantees and ensures proper removal.
To become licensed in mold remediation, applicants are required to perform specific training programs to learn about mold and how to remediate it effectively. To even get the chance to become licensed, an applicant must complete two sets of training. The first part of training includes sessions that add up to 24 hours of instruction and covers the basics of mold identification, mold assessments, and mold remediation. The second part of training covers Louisianas Unfair Trade Practices and Consumer Protection Law for the safety of the public and takes four hours. This means a person licensed in mold remediation has knowledge on all things mold and knows how to professionally conduct the remediation within the law of Louisiana.
While your friends husband has good intentions and is usually capable of handling any minor home fixes, a professionally licensed mold remediation specialist is the best way to go when dealing with mold. The remediation specialist will have the training, insurance, and license to effectively, safely, and legally perform the mold remediation within your home.
Don’t Miss: Removing Mold From Shower Ceiling
Howlong Does The Mold Inspection And Mold Remediation Courses Take
The 90-hour mold inspection course is self-paced and can be completed in as little as 1-2 weeks or you can takeas long as you would like. The 40-hour mold remediation certification course can be completed in about 1 week.You can take the courses 100 % online from any computer or mobile device. Quiz results save automatically to thecloud, so you can check your progress from any computer. Upon passing the final exams, you will receive a certificateyou can print out.
Mold Training Providers May Offer Continuing Education Online
It has been a common practice for Mold Training Providers to hold continuing education courses in the same setting as initial training courses, which are typically held in person. With the limitations caused by COVID-19, Mold Training Providers may now offer continuing education courses online. Providers with questions should contact the Education and Examination division.
Don’t Miss: Cleaning Mold Off Basement Walls
Is Mold Testing Worth The Cost
Unless there is a specific reason or state regulation requiring a mold inspection, you can save time and money by skipping mold testing. The results of a mold test do not change the remediation process. Even in the case of black mold, remediation is the same. However, you might consider having a mold test if you are involved in a lawsuit or if legal action is pending.