How Can I Remove Mold
Given the danger posed by mold, you need to get it out of your house. Because molds eat the surface theyre growing on, they need to be removed before the surface is weakened or destroyed.
Step one: The first step is to spray the affected area lightly with water. This helps prevent the escape of spores into the air.
Step two: Next, scrub the area lightly with a scrub brush. This will knock off the outer layer of mold and break up the inner layers, exposing them for the next step.
Step three: Spray the area with mold killer. Be careful to follow the directions on the bottle concerning ventilation, PPE , treatment surface, and other cautions. Many mold removal products will cause damage if you use them on the wrong surface. Luckily, there are mold killers for almost any surface.
Step four: Once the mold killer has finished its chemical work, thoroughly rinse the area to remove any remaining chemicals.
Shockwave Disinfectant Helping Hurricane Sandy Clean Up
If youre like many others that have been affected by the hurricane Sandy devastation then you probably have or had mold. Mold is something that no one wants see. Its something that if you leave untreated it can kill.
Once you have killed the mold using either our MMR Mold Remover or bleach then its time for the next step. Dont just treat the mold and then leave it alone. Make sure that its gone forever and wont grow back in the same spot. Shockwave is a disinfectant product that you need for completely resolving a mold issue.
Shockwave is a disinfectant that you use after the process of mold remover. Shockwave will make sure that the mold wont grow back. It will also sanitize the area. Shockwave is one of the best mold disinfectants you can buy.
At Fast Mold Remover we guarantee that youll be satisfied with our disinfectant. Its a product to use and has proven to stop mold growth. Shockwave has killed over 130 different organisms, which if you have been affected by the hurricane, would be great for you to use.
We at Fast Mold Removal are here to help disinfect all traces of mold. Its a very serious issue and we take pride in our work. Shockwave is one of our signature products. It goes on AFTER you bleach or use MMR Mold Remover. Do NOT use it as a mold killer.
Buying Guide For Best Mold Killers
What can you do when mold makes an unwelcome appearance in or around your home? You could break out the soap and water, get a scrub brush, and start applying a lot of elbow grease, or you could take care of it the easy way: with a mold killer.
Mold can cause a lot of health-related problems, so you need to address it as soon as it appears. There are lots of choices available. Some mold killers are best used on concrete but not wood while others are designed specifically for use on wood. Mold killer can take several forms, too. There are sprays, foams, gels, and concentrates that need to be diluted before you use them.
Its crucial that you pay close attention to safety issues with mold killers due to the chemicals they contain.
Don’t Miss: How To Clean Mold Off Concrete
Shockwave Ready To Use Disinfectant Sanitizer And Cleaner Mold Killer: $11995
This is the Ready-To-Use version of Shockwave.
ShockWave RTU is an EPA registered disinfectant, sanitizer and cleaner designed specifically for mold remediation contractors. ShockWave RTU is designed to meet all your disinfecting, sanitizing, cleaning, and deodorizing needs. ShockWave RTU is strong enough to be used in a hospital or medical environment, and has been specifically formulated to be used on both porous and non-porous materials. ShockWaveRTU is a powerful ready-to-use quaternary ammonium chloride blend, which is ideal for use when clean water is not readily available or for any situation where a ready-to-use formula is required. ShockWave RTU has over 120 organism kill claims including Aspergillus niger, Penecillium spinulosum, E. coli, Salmonella, HIV, Hepatitis-B, Herpes, Poliovirus, and many other pathogenic and environmental microbial organisms.
The most versatile EPA Registered disinfectant for the restoration professional.Every project is unique. You need the right tools to handle the situation quickly, easily, and cost effectively. ShockWave is the only tool youll need for sewer cleanup, mold remediation, disinfection, porous surface sanitization, deodorizing or infectious organisms.
ShockWave is EPA Registered for use in water damage restoration, carpet sanitization, sewer backups , on porous & non-porous materials, and non-food contact surfaces.Product Specifications:
Choosing The Best Shockwave For Mold
Are you stressed out by finding the perfect shockwave for mold? When considering the purchase of shockwave for mold in general, have you ever felt uncertain about what model to select?
You dont have to worry about being alone sometimes just knowing that you arent. The perfect shockwave for mold can be hard to find for many people. That is why were here to assist!
This page is obviously regarding Cheap shockwave for mold Reviews which is why youve come here. Before committing, locate a source with a variety of options to make an informed decision.
Obtaining information can be done in several ways using online buying guides, independent product reviews you find across the internet, word-of-mouth recommendations, forums where users share their experiences, and even YouTube channels. It is only through thorough research that one can come across the best products.
Correct? Does it always seem too hard to accomplish that? For that reason, we have gathered a list of the top shockwave for mold products on the market, for your convenience.
Our list was compiled based on what led us to do so? How did we come up with this guide?
We first gathered product information from reliable sources using the algorithms we had created.
Various methods for verification of collected data were used, including artificial intelligence and big data sets.
Our products arent chosen randomly. We take several factors into consideration before putting together a list. Among them are:
Read Also: Does Led Light Kill Mold
Fiberlock Shockwave Concentrate Disinfectant/sanitizer
-
Registered on the Environmental Protection Agencys list of disinfectants for use in fighting the new coronavirus pandemic!
-
Over 130 organism kill claims
-
Effective in 791 ppm hard water
-
Approved for use against H5N1 Avian Flu
-
1 Gallon Containers. Four 1-Gallon Containers Per Case.
ShockWave is an EPA registered disinfectant, sanitizer and cleaner designed specifically for mold remediation contractors. ShockWave is designed to meet all your disinfecting, sanitizing, cleaning, and de-odorizing needs. ShockWave is strong enough to be used in a hospital or medical environment, and has been specifically formulated to be used on both porous and non-porous materials. ShockWave is a powerful concentrated quaternary ammonium chloride blend that yields up to 64 gallons of usable product from every gallon of concentrate. ShockWave has over 130 organism kill claims including Aspergillus niger, Penecillium spinulosum, E. coli, Salmonella, HIV, Hepatitis-B, Herpes, Poliovirus, and many other pathogenic and environmental microbial organisms.
1 Gallon Containers. Four 1-Gallon Containers Per Case.
HOW TO USE
WATER DAMAGE RESTORATION:
SEWER BACKUP & RIVER FLOODING:
DISINFECTION:
VIRUCIDAL:
When used on inanimate, hard, non-porous, environmental surfaces at 2 ounces per gallon of water for a 10 minute contact time , except for Poliovirus type 1 : which requires a 20 minute contact time and HIV-1 which requires only a 30 second contact time.
CLEANING AND DEODORIZATION:
What Causes Mold
Mold needs a food source such as cotton, drywall, or wood. It only grows in the dark, so to thrive, it needs an area that is sheltered from the sun. It also needs warmth and moisture. Mold cant grow in freezing temperatures or dry climates.
A shaded backyard near a swimming pool is an excellent place for mold to grow.
Don’t Miss: How To Paint Pvc Molding
How To Use
ShockWave is designed to be diluted two ounces per gallon of water, yielding 64 gallons of usable product per gallon of concentrate, making it an economical solution for your cleaning, disinfecting, and sanitizing needs. ShockWave is available in 1-gallon containers and in convenient 10-ounce bottles that make five gallons of usable product.
ShockWave concentrate is designed to be economical and efficient. ShockWave concentrate should be diluted with water before use. Do not use full strength. ShockWave is also available in ready-to-use.
*ALWAYS READ AND FOLLOW THE LABEL INSTRUCTIONS ON THE PRODUCT BEFORE USE.
