Hydrogen Peroxide Or Chlorine Bleach
Hydrogen peroxide is an effective anti-fungal solution that is widely used for removing viral fungi and bacteria. Chlorine bleach contains the same hydrogen peroxide solution with strong oxidizing properties which removes fungi and also sterilizes and disinfects the glass surface. The solution also works efficiently for removing black mold which is one of the stubbornest kinds of household mold.
How Do You Mold A Glass Slumping
Slumping glass into a mold is the most commonly used method. Glass is balanced on top of a mold and placed into the kiln, where gravity and heat sink the glass downwards in the mold shape. This method is best utilized with ceramic mold. Make sure there is a small hole at the bottom of your mold so that air can escape.
How Do Water Stains Develop
Getting that pristine look of glass, you see on Tv is not always easy but you deserve it. Instead, you are left with deeply stained glass. You see, these stains are caused by the presence of some minerals in high concentration in water.
In your home, your bathrooms are the likely victim because of the amount of water thats often used in the bathroom. In your bathroom, with constant contact with water, these minerals build up and become stubborn stains and even mold.
Don’t Miss: Does Spray Paint Kill Mold
Cleaning Black Colored Mold
Don’t panic. Let me share the facts according to the Center for Disease Control & Prevention :
“At present there is no test that proves an association between Stachybotrys chartarum and particular health symptoms. Individuals with persistent symptoms should see their physician. However, if Stachybotrys chartarum or other molds are found in a building, prudent practice recommends that they be removed.”
Basically, any mold can make otherwise healthy people have hay fever like symptoms. People that already have immune system issues or breathing difficulties can experience increased symptoms. My rule of thumb is: if you see any kind of mold get busy and clen it up.
There are fairly simple, inexpensive and effective ways to get rid of all colors of mold for good, providing that it is found in the early stages.
Read On For Some Tips And Advice On How To Clean Shower Mold
Vacuum
Before you clean shower mold, you will want to clean your shower walls with a vacuum with a HEPA filter. This can help remove any loose mold rather than just moving it around your shower.
Baking Soda
Baking soda is an effective, gentle inexpensive cleanser. You can use baking soda to make your own shower cleaner. Use one cup of baking soda, one teaspoon of liquid soap, a few drops of essential oils, and enough water to make a paste. Spread the paste over the mold and allow to sit for a few minutes, then wipe away with hot water. Do not forget to clean mold from the shower door. This should remove most of the mold.
Bleach
For the mold that was not removed by the baking soda paste, you should try bleach. Make a solution of 1 part bleach to 2 parts water and put in a spray bottle. Spray directly onto the mold and allow to it to dry. Spray again and then use a scrub brush to remove the mold. Rinse with water. If there is still mold left, repeat the bleach process.
Bleach can be dangerous. Make sure to wear gloves and keep the bathroom ventilated to prevent inhaling toxic fumes.
Replace Caulk or Grout
If you cannot get rid of all of the mold, you may want to consider replacing the caulk or grout in your shower.
Vinegar
If you try the vinegar method along with the baking soda method, make sure to keep your bathroom well ventilated, as the mixture of the two results in the production of carbon dioxide, which can be toxic in large quantities.
Borax
Ammonia
Read Also: What Kills Mold Spores On Wood
What Is Freeze And Fuse Glass
Freeze and Fuse is the method of taking wet powder glass, mixing it with water then packing it into a mold of some kind so it forces all the water to the top, which is then blotted off with a paper towel. The mold is then put into the freezer for about an hour until the wet powder is frozen solid in the mold.
Your Windows And Mould Issues: What You Should Know About Spotting Resolving And Preventing Mould Development
For many people, the home is the single most significant financial investment they will ever make. Protecting that investment does mean managing basic upkeep and performing maintenance when and as needed. While many homeowners do well in terms of addressing the more obvious aspects of maintenance, others can be neglected. One of those can be the presence of mould in the home.
In particular, its easy to overlook mould that has developed on the windows. Given the fact that not all mould is dark in colour, its sometimes overlooked as dust or something else thats benign and can be dealt with later. The result is that the mould has more time to damage the windows as well as cause other issues for anyone whos living in the home.
One thing that must be clear: mould in any form and in any amount is not something to take lightly. If theres any hint of mould found along the windows or any other part of the house, the time to take action is now. Here are some facts that you should know about mould, what to do when you spot it, and how to reduce the risk of it returning any time soon.
You May Like: What Is The Best Way To Remove Mold From Walls
Whats So Bad About Mould
Apart from the musty scent that most forms of mould produce, why is it such a bad thing to have in your home? The short answer is that it causes a number of health issues and can also lead to structural damage.
The World Health Organization provides a great deal of information about mould, including some of the more common health risks that mould exposure can trigger.
Here are some examples:
Thats a good overview of the health-related consequences of mould in the home. There are some other issues to consider, including what mould can do to your homes structure. Damage to wood framing is one of the primary threats that must be address. Mould spores can travel through the home on the soles of shoes, by way of the ventilation, system, and a number of other ways. As it spreads, it can adversely affect the integrity of the wood framework of the home. Over time, the weakening can lead to shifting thats more than mere settling.
Nothing good comes from the presence of mould in your home. From your health to the structural integrity of the home, it can cost you in more than one way.
How To Clean Mold Off Wood
- Pin
The Spruce / Georgia Lloyd
Mold and mildew spores are all around us. Add some heat and humidity, and a colony of fungus will begin to grow on fabrics, shoes, walls, bathroom grout, and bare or painted wood.
The most common type of mold found in homes is mildew. Mildew is a surface mold that grows in warm, damp places like basements, laundry rooms, and shady porches. Mildew begins as a gray or white powdery colony and eventually turns black or brown. To test if the wood is covered with mildew or just dirt, dab the stain with a cotton swab dipped in household chlorine bleach. If the stain lightens or disappears after two or three minutes, it’s mildew. If not, it’s probably just dirt.
Mildew can discolor and slowly harm wood surfaces but there are much more dangerous molds that can damage the structure of your home. If a fuzzy or slimy black or green mold is visible and the drywall or wood underneath is soft or crumbles, there is irreversible rot and the damaged surfaces must be removed immediately.
Don’t Miss: Can Black Mold Cause Irregular Heartbeat
What If Your Windows Are Made With Wood
The process above works well with aluminum and PVC windows. It also works with wooden sashes and frames that are made with treated wood and that have a proper sealant. If your windows are wood and have little to no finish, another approach is called for.
Having the windows sanded may be the only real solution. It gets rid of the layer where the mould has set up. Once thats done, wipe down the area to get rid of any residue. Apply a small amount of oxalic acid to effectively bleach the spot. Rub it in using an old toothbrush or a cotton swab. Rinse with water and see if the spot darkens again. If so, apply the acid rub again. Rinse a second time and then dry the area.
Make sure the spot is completely dry before you begin to restain the wood. Remember that a coat of varnish or some other sealant will prevent mould from seeping into the wood again.
The Shocking Discovery I Made With My Glass Storage Containers
Im not giving up my eco-friendly food boxes, but I am totally changing how I clean them.
Ive been an avid fan of ditching plastic food containers for quite some time. I much prefer storing leftovers and freezing meals ahead in glass storage containers. They reheat betterno pink stains from tomato sauceand they dont warp with use.
But earlier this summer, I have to tell you, something horrible happened.
There I was, standing in my kitchen waiting for my dinner to heat up. I was flipping the lid back and forth between my handsI use it as a coaster under the container so the heat doesnt leave a mark in the woodand I noticed little black specks between the lid and the rubber seal that secures the lid when its snapped closed.
I quickly flipped on my kitchen light, and my worst fears were revealedmold!
Kimberly Holland
It seems while I wasnt paying attention, food particles, water, and whatever else inhabits my dish liquid were setting up a cozy home in the nooks and crannies of my containers. I pulled out the multitude of lids from my various containers, and sure enough, they all had little spots.
I shouldnt be surprised. The rubber band isnt secured to the lid. Its there to be a stopper, to keep air out and liquids in. Its a necessary component. I just hadnt thought about the high likelihood that mold and food particles could slip into the tiny gap.
RELATED: 11 Things You Need to Clean In Your Kitchen ASAP
You May Like: How To Eliminate Mold In Crawl Space
How Can Pink Mold Spores Be Hazardous To Health
Similar to other kinds of molds, when pink mold grows in your bathroom or anywhere in your house, it can be dangerous. As it grows, the spores or fragments can enter the air and produce irritants, allergens, and mycotoxins.
Moreover, pink mold thrives in a moist environment and grows rapidly. This process can increase the chances of this mold coming in contact with people in the house regularly.
Furthermore, it can cause a wide range of health problems for anyone who comes in contact with it. Lingering bacteria in the air can cause a range of issues, from allergic reactions to bladder infections.
While it can result in just mild issues, such as coughing, skin rash, and eye irritation, it can lead to worse issues as well. In some worst cases, severe exposure to this mold can cause lung inflammation and health risk related to the urinary tract.
Moreover, it can cause serious damage to health in cases of people with compromised immune systems.
Here is a list of some common health risks related to pink molds:
Urinary tract infections
Respiratory tract infection
Removing Mold From Non
To remove mold from non-porous surfaces such as tile, tubs, sinks, glass, and metal, we recommend using a non-ammonia based cleaner or an antimicrobial mold remover such as Foster 40-80. Apply the mold remover to the moldy surface and scrub with a rag or brush. Clean the surrounding area, as well, since sometimes not all traces of mold are readily visible.
Wear protective gear when removing mold, including disposable gloves and an N-95 face mask . Tape sheets of plastic over air vents and close doors leading to other rooms to prevent the spread of mold throughout the home during the cleanup process. If youre working in a large room, mold removal experts recommend using large sheets of plastic to block off a small work area so that mold spores dont spread throughout the whole room during the cleanup process.
Mold sometimes grows inside heating and air conditioning ducts, which are typically made of metal which is non-porous. However, removing mold from heating and air conditioning ducts is much more complex than removing it from a bathtub or tile floor. The Environmental Protection Agency recommends calling in a professional if you have mold in your ductwork. A professional will know how to remove mold from heating and air conditioning ducts and have the equipment required to do the job right.
You May Like: Is It Bad To Breathe In Mold
Spray The Affected Area
Remember that empty spray bottle? Fill it with water thats at room temperature. Youll use it to saturate the area where the mould seems to be present. Theres a method to this apparent madness that you may have overlooked.
Spray the area thoroughly. That may seem odd since you know that mould thrives in moisture. That youre doing is to wet the mould so that the spores are less likely to spread. Be sure to spray the area around each spot as well.
Preventing Mold In The Window Frame
Window frames, like window sills, are typically either made of aluminum or wood and both types can develop mold. On aluminum frames, dust that is rich in organic matter can accumulate in the joint where the glass meets the frame. This joint can trap the condensation that exists near the windows, ensuring optimum conditions for the growth of mold.
On wood window frames, the moisture trapped near the joints of the wood and glass is enough to encourage the growth of mold. Damp wood is a very common food for mold. To prevent the growth of mold, make sure that the joint between the wood and glass is free of dust and moisture. Scheduling weekly cleaning of these parts of the window will help you stay ahead of it.
Read Also: Can You Kill Mold With Uv Light
Before I Dive Into The Method I Use And Recommend To Cleandishes Glassware And Kitchen Items That Have Been Exposed To Mold Lets Lookat What Exactly Can Be Salvaged From Your Kitchen
- All dishes including glass, glazed clay, china or porcelain.
- All serving dishes like bowls, pots, gravy servers, carafes, casserole dishes including glass, glazed clay, china or porcelain.
- All items made of glass including jars, glasses, boxes, figurines, ash trays, dishes, bowls etc.
- All metal silverware including everyday stainless and/or fancier silverware for entertaining.
- Most pots and pans including lids can be cleaned. The main exception is cast iron. It simply cannot be properly cleaned to remove mycotoxins. In addition, if you have copper or one of those other green pans, you shouldnt try to save it if it has scratches on it.
- All bakeware, including silicon and glazed stoneware.
- Most utensils can be saved unless they are made of wood.
Anything not on this list that has been exposed to mold shouldbe thrown out. This is especially true of:
- Wooden cutting boards
- Wooden utensils
- Appliances with a motor
- Appliances or kitchen items with little nooksand crannies
- Knife block
- Anything with fabric
The mold and mycotoxin removal process is a bit time consuming. The solution I recommend has been independently lab tested and proven to reduce the amount of mold and mycotoxins. You might see a lot of other suggestions out there but I assure you, I have done far too much research and experimentation and I know what I am recommending works.
How To Clean Mold Off Of Windows
In many cases, mold around windows doesnt become a major problem and home owners can remove it using a mild detergent before scrubbing and wiping the windows clean. You can also mix just a cap full of bleach in with a gallon of warm water and use that on a clean rag to scrub the window and any affected areas.
When you clean and remove mold from windows, dont take any risks and make sure that you wear protective gear to prevent any mold from coming into contact with your skin. Wear rubber gloves and face mask while youre cleaning too. As you finish, open the window or run exhaust fans for ventilation.
Recommended Reading: Do Water Filters Remove Mold
What Causes Devitrification In Glass
Devitrification is the growth of crystalline structures within or on the surface of glass. Devit can result from firing too slowly through the devitrification range of temperatures. It can also result from firing contaminants like oils and fingerprints onto glass and thus seeding the growth of crystals.
Wash Down Sealed Or Painted Wood
If the mold has grown on painted wood or a sealed wood finish , begin by washing down with a liquid dishwashing detergent and water solution. Mix one tablespoon of detergent to one quart of water. Use a soft-bristled brush to scrub down the surface. Try not to saturate the wood, use a sponge to remove excess water as you clean.
The Spruce / Georgia Lloyd
You May Like: How To Get Rid Of Black Mold In Hot Tub
