Saturday, July 2, 2022

How To Mold Your Cock

How To Make Your Silicone Mold

Mr Wilson Teaches Alginate Mold Making

First, you will need a good molding medium. We like Mold Star 16 Fast by Smooth-On because its simple to use, cures fast, and doesnt require any degassing.

Its also a good middle ground in terms of hardness, and from there you can try harder molding mediums like the Mold Star 30 to see what you prefer to work with.

While it isnt optimal, if you wish to keep your price to a minimum, you could always use DragonSkin 10 A or 20 A for both your toys and your mold, but anything softer will make molding your toys extremely difficult.

Next, you will need a container to hold your mold as it cures.

You can use a variety of containers here, may it be smooth airtight boxes, water jugs, or anything else thatll fit your toys and then some. Just make sure the container you use can contain viscous liquids without leaking or breaking.

Our favorite method is building our own custom Boxes with Legos.

This makes freeing your silicone molds much easier and your boxes infinitely recyclable. Just make sure the bottom of your box lands on the smooth side of your lego blocks to avoid any issues.

Bricks can easily be bought in bulk on Amazon.

For reference, heres a little model I made to show how to orient your bricks:

Of course, when molding, you wont have the box on its side like this and youll want to have it standing with the hole facing up.

Learn From My Mistakes

In lieu of a Valentines Day gift, I wrote my girlfriend a letter explaining what Id gone through. I finished the letter with, I tried, I failed, but I will not give up. I need your help, my love.

The biggest takeaway I can give you is that the Clone-A-Willy kit requires a partner, there to facilitate the process and provide support, both physically and emotionally. Ive since bought another package of molding powderthe fact that Empire Labs sells the powder separately tells me Im not the first to muck it all upand Ill try again someday, when the shame stings less.

Replicating Body Parts In Plaster

This is the first part of a two-part series on making a silicone replica of a body part. However, before we can make the silicone replica, we’ll have to make a plaster replica.*** WARNING: Because of the body part chosen for casting , this Instructable may contain material considered offensive or objectionable to some readers. Viewer discretion is advised. ***

You May Like: How To Clean Black Mold On Shower Grout

Model Cast Of Your Penis

I want to make a cast of my penis Pre-PE and use it to compare. I feel that this will be the best for me, and also an interesting experiment. What would be the easiest, and safest, method of doing this?

Thanks,

Make one out of construction paper and duck tape. Or you could use regular modeling clay and make one from that.

Search. Read. Learn. Apply. Make weener bigger……..Eventually reach goal of giant weener

What about plaster of paris? Construction paper and duck tape wouldnt work for what I want, and modeling clay.. Would that even be feasible for a good mold? I am thinking of a mold that hardens.

There are millions of em

Yes, google is a good place to start. From my understanding, there are many kits for penis casting ready to go right out of the box.

Personally, I would have some interest in making a silicon mold of mine. Then my girlfriend could try before and after me. Lets hope that she does not like before more, heh!

Goal: 17+ cubic inches of volume, someday, currently inactive

All the kits are like $50 though. I do wish there was an inexpensive way to just get a dimensionally correct physical representation of my dick for comparison purposes down the line. Its true that that could be major source of inspiration and satisfier of curiosity since measurements arent nearly so real and also are subject to variation in measurement technique.

Cheap, simple, and fast, yet accurate? Well, I thought about this for awhile. How about aluminum foil?

BPEL 7.4″

What’s Not In The Kit

Penis Casting Mold Copy Kit LIGHT Tone Suction Cup Base

You’ll need some extra tools not supplied in the tube. The kit calls for: a measuring cup, a large mixing bowl, a timer, scissors, a disposable container to mix silicone in, and a four-inch square of cardboard, which is used to suspend the vibrator in place as the dildos silicone hardens around it.

Also Check: How To Get Mold Off Shower Grout

Making Sex Toys The Hobbyist And Pro Way

This is where things get serious.

If youre looking for a finish closer to the toys you can buy in traditional sex shops and Etsy stores or if youre planning on selling multiple copies of your creations, this method will work best.

Of course, this process is much more involved, but the quality youll get out of your DIY dildo creations along with the profits you can make if you do decide to sell them is much more rewarding than what youll get with the pre-made kits mentioned above.

This method is also the most expensive up front, but, once youre set-up, the cost of making your DIY sex toys will be way cheaper than any other method.

If you want to keep the price down, weve isolated optional steps from the process.

Theyre not essential, but if youre looking for a truly professional finish and quality, youll want to follow them still, especially if you intend on selling your toys.

What Is A Homemade Dildo

A homemade dildo could technically be any kind of everyday object which you stick inside of yourself. However, in the context of this article, lets say that a homemade dildo is a penis-shaped object which you use for sexual purposes. It might not be the most scientific definition of a homemade dildo, but I have yet to encounter a dildo scientist in my life, so lets let it slide for now, shall we?

If it looks like a penis, if it acts like a penis, and if you made it yourself then there you go you have yourself a homemade dildo! Before we move on to the actual methods on how to make a dildo, lets highlight some methods on how you should NOT make yourself a homemade dildo.

Read Also: Remove Mold From Brick Pavers

How To Make A Dildo

With all that out of the way, lets get to the part which you are probably most interested in. How do you make your very own dildo?

Well, in order to show you the process, we should first clarify which kind of a dildo you are trying to make. Is it a fully homemade dildo made of household objects, or is it a dildo created with a penis molding kit? If you are unsure of what you want, then dont worry I will cover both of them in greater detail.

In short, though, creating a fully homemade dildo involves using household objects for sexual pleasure. They can be effective at times, but in reality, they are no match to a real high-quality dildo. Penis molding kits, on the other hand, are very easy to make, and they look and feel superb.

Lets explore our options more closely, shall we?

How Its Supposed To Work

Injection Molding: Mold Design & Making

Easy to make! the packaging shouts, with four simple steps outlined below. First, mix the molding powder with water. Next, pour the mixture into the tube and insert your erect penis. Three, pull away the mold and fill it with silicone. Lastly, slide out an exact copy of your penis. Easy, indeed!

My fantastic confidence in this endeavor and product waned considerably when I unfurled the poster-size directions. The four simple steps had transformed into more than a dozen, and the incredible specificity of each step had me in an immediate state of panic.

For example, the molding powder must be mixed with water that is exactly 90 degrees Fahrenheit. You must mix the powder and 90-degree water for exactly 45 seconds, then pour the mixture into the tube as quickly as possible.

You then must hasten to shove your erect penis into the mixture “immediately,” carefully avoiding touching the sides of tube. The tone of the directionslighthearted and humorousoutline a process that required careful, diligent planning. As the impetuous man I am, directives such as, Timing is very important! stress me out, and I realized how unprepared I was for the Clone A Willy’s litany of commands.

Recommended Reading: Best Way To Remove Mildew From Boat Seats

I Tried To Clone My Willy Heres What Happened

Staying hard has never been so hard.

The thought took me by surprise: Why dont you make your dick into a dildo? Two weeks before Valentines Day, I didnt know what gift to get my girlfriend, and the idea of making a rubberized replica of my penis sprang from some strange, unfortunate corner of my mind. At least it came from a heartfelt place. My girlfriend and I are in a long-distance relationship as she finishes nursing school, and life is worse when we cant rub our genitals together. I wouldnt say my penis is gift-worthy, but for whatever reason she enjoys it.

I asked my friends: Would a dildo of myself make a good gift? The response was a resounding yes. After my inquiry, my best friend, James, liked the idea so much that decided he, too, would craft a dildo for his girlfriend. At least I wouldn’t be venturing into uncharted territory alone. Right around this point was when we started to realize we’d overlooked a crucial part of this plan: How does one make a dildo of one’s penis?

How Not To Make A Homemade Dildo

If you want to avoid getting diseases and rupturing your pleasure patches, then take some precautions:

  • DONT insert any household object inside of yourself unless it has been sterilized or covered with a condom. Inserting dirty plastic inside of yourself is dangerous and an easy way of catching diseases.
  • DO make sure that any object you insert of yourself will not smash or break into pieces. There is nothing worse in this world than having to clean your insides from broken-down pieces of a Cheetos-covered TV remote.
  • DO make sure that the material of your homemade dildo is nonporous and free of phthalates. Dildo materials such as silicone are body-safe because they do not react with or release any chemicals which could cause bodily harm. If in doubt, dont insert. Simple as that.
  • These precautions are most relevant if you are using a regular household object such as a cucumber or a TV remote as your dildo. If youre using a penis molding kit to make your dildo, or if you bought a regular dildo from a trusted sex toy store, then you can rest easy. You will not have any issues!

    Read Also: Moss Prevention On Pavers

    The Fun Doesnt Stop There Consider Fists Vulvas And Dream Dicks Sculpted Out Of Clay Too

    If learning how to DIY cast a silicone dildo at home seriously interests you, consider investing. As tedious as the Clone-A-Willy molding and casting process was, it was also fulfilling. Im looking forward to cloning a vulva and fist, too. With the amount of materials Id need, it may be cheaper in total to shop for materials outside of whats available in the kits.

    For a one-off DIY custom vibrating silicone dildo, though?

    The Clone-A-Willy is just $32 at The Vibed with my discount code, SUPER20 what a steal for what it is! Take 20% off sitewide and get free shipping on orders over $15, too.

    Check out all the Clone-A-Willy colors available:

    • Hot pink
    • Light skin tone with balls
    • Alginate molding powder refill

    Related: 10 Hard Facts About Your Man’s Member

    Copy Me! Penis Casting Ultra Kits #1 In

    It felt a little icky. Was I failing as a feminist? I thought about how I was going to earn money from the whole endeavor and felt like an immense assh*le. I wondered if Hugh Hefner ever felt this way. Then I couldn’t believe I was drawing a parallel between Hugh Hefner and myself. Who am I?

    I decided then and there to use the money to do something for my boyfriend. Guilt assuaged, I carried on.

    “I was turning part of him into an object. It felt a little icky.”

    Choosing features was easy: no to glow in the dark, yes to vibrating choosing the color, not so much. There were garish neons , a variety of flesh tones , and jet black. The features I wanted narrowed down the selection.

    I imagined he wouldn’t want it to be hot pinkand I’m not much for pink anyway. Neon green was possible, but I couldn’t imagine putting an opaque silicone penisthe color of my third-grade slap braceletsin my vag. So I ended up choosing a flesh tone reminiscent of a peachy crayon. In real life, it’s even uglier than you think. $35 and a shipping address later, it was a done deal.

    The next time my boyfriend came over, we opened the box and looked at the contents. One thing was clear: We weren’t making a Lelo-grade product here. We spread the components across my bed and he grabbed the flimsy clear plastic tube meant for housing the mold.

    “How long am I supposed to stay hard while that sets?”

    “Is it going to be cold?”

    “Are you gonna watch? How are we doing this?

    Recommended Reading: Boat Seat Mold Remover

    Preparing The Plastic Tube

    First things first, you gotta size up the plastic tube. To do this, you place your erect penis next to the plastic tube with the open end facing away from you. Take a sharpie and mark about half an inch beyond where you dick stops, giving it some leeway. I accidentally did this with the tube the wrong way round at first, which is why there are random sharpie marks in the wrong place.

    If its safe for you to do so, you might want to take a Viagra or a generic sildenafil pill to help you stay hard throughout this non-erotic process.

    Now use scissors to cut off the end of the tube. This is easier said than done, especially if youre trying to make the edges smooth. Consider taping over the edges with duct tape for a more comfortable fit against your groin.

    How To Mix Your Colors

    Mixing colors is a lot like mixing any other type of paint.

    Our favorite method is to color only Part A with the pigments. This will not only leave you with more time to color your silicone but itll also ensure a uniform mix of the two parts when the time comes.

    If youd like to know how to create marbled designs, gradients or any of that fancy stuff, Candirus Vimeo page is an excellent resource with many more advanced coloring methods.

    Once you have your mold handy and youre ready to mix the colored part A to part B, proceed just like with the molding process.

    Optional Pro Step: At this point, if youre using a Silicone with a high viscosity, you might want to do some silicone degassing to get rid of as many bubbles as possible.

    Youll need a

    Vacuum Pump& Chamber and follow the process found in this handy video.

    Don’t Miss: How To Clean Mold Off Bathroom Ceiling

    What Comes With The Clone

    Clear packaging tube

    The default container for the Clone-A-Willy kit components stands about 11 inches tall and 2.5 inches wide. Most penis-owners will have enough room in the tube to make a mold of their penis.

    Unfortunately, my boyfriends penis was too big for the included Clone-A-Willy kit tube. Remember: we needed some extra room for the molding compound to form walls and maintain its shape around the thing we cast. If the penis is wider than 1.75, you may need to find a bigger container.

    Penis casting instructions

    Mold making sounds simple, but its not necessarily easy so many things can go wrong. The kit includes basic instructions and troubleshooting tips. This Clone-A-Willy review will go into where they could have elaborated more.

    Alginate powder

    This algae-based mold compound is squishy, non-toxic, and flexible. Theres just enough for one Clone-A-Willy attempt, so you may want to consider buying more especially with a penis too big for the Clone-A-Willy kits included tube. Ill elaborate on that later.

    Thermometer

    Cold alginate takes a longer time to set, while warmer alginate solidifies quickly. You want a nice balance between working time and, well, how long you have to keep a penis erect in goo.

    Liquid silicone

    Silicone is body-safe, easy-to-clean, and practically non-porous all the good stuff.

    Catalyst for curing

    Self-explanatory. The silicone included in the Clone-A-Willy kit wont start solidifying until you mix the two liquids.

    Pigment powder

    It Is Now Finally Time To Pour The Silicone Into Your Mold

    Make your own silicone molds

    This step is exactly like when you poured your mold except it is now mandatory to spray Mann Ease Release 200 into your mold beforehand. Otherwise, the two silicones will bond and youll have to make a new mold from scratch.

    So repeat all the steps from the mold pouring process above but this time around, youll be pouring into the silicone mold.

    Now set your DIY dildo to cure in the open or in the pressure chamber at around 40 PSI for the amount of time required by the silicone youre using.

    Once this is done, pull it out, give it a good wash with some grease-fighting detergent and youre done!

    You May Like: Best Way To Clean Mold Off Leather

    Related: 5 Outrageous Things We Bet You Never Knew About Masturbation

    Afterward, lying amidst the components of our aborted project, we laughed about the “failure” and vowed to try again next weekend. We would not be distracted. I gathered the pieces, shoved them back in the box, and stashed it under my bed. Next time.

    Only next time didn’t happen.

    Our next few interactions didn’t take us back to my place and then a few weeks later, my boyfriend disappeared. I don’t mean in the form-a-search-party way, just in the turns-out-he’s-a-massive-coward way.

    “All that accomplished was a perfectly good erection being used for some actual sex.”

    That bastard ghosted me, and he took my dreams of having a replica of his cock in my nightstand with him.

    It’s hard to be mad, though. As much as I enjoyed his girth and length and the idea of having the world’s best screwvenir, I imagine few things would kill my lady boner like pulling out a plastic shrine to what ended up being the second-biggest dick in that relationship.

    Popular Articles
    Related news