Black Mold In Toilet Bowl Diabetes
Theres no direct link between mold and diabetes. It, therefore, means mold doesnt cause diabetes. However black mold could highlight certain symptoms of diabetes in your body.
Well, mold is known to thrive in sugar, when one is suffering from diabetes, the body doesnt adequately hold on to enough glucose but rather releases it through urine.
Hence, when you notice a reoccurrence of mold in your toilet with all other factors constant, it could mean your urine contains too much sugar meaning you may be suffering from diabetes even without your knowledge.
The link then appears in that mold infestation could be a major indication of your blood sugar levels in sweat and urine, warranting the need for a checkup.
How To Keep Your Toilet Tank Clear Of Mold
Every once in a while, you will have to repeat this cleaning process. However, you can avoid intensive cleaning by flushing the toilet every so often to reintroduce new water into the tank.
You can also purchase products that sit inside your toilet tank that help introduce a small number of chemicals consistently to keep the water clear.
How To Prevent Mold From Growing Back Again
Now that both your toilet bowl and toilet tank are clean, you will need to tackle the problem of preventing mold from growing again. After all, they are constantly moist, so mold might grow again. Cleaning your toilet bowl and toilet tank involves the same process. However, sometimes bleach doesnt cut it.
As mentioned earlier, there are various cleaning products in the market that get rid of mold permanently. However, you can make your own with a few choice items in your household, such as vinegar, hydrogen peroxide, and even lemons. Also, you can buy toilet products that sit in the tank and mix in little bits of chemicals every time you flush, which is a good way to prevent molds from spreading again.
Don’t Miss: How To Install Crown Molding On Cabinets
Why Does Toilet Mold Build Up
Mold and mildew will naturally build up in dark and warm places and are caused by humidity. This being said, the toilet tank and the toilet bowl, filled with stagnant water, often in a warm bathroom, are a perfect place for mold to grow.
When water remains still for a short period, for example, if the toilet is not used often or if you are out of the house for a couple of days, mold can easily breed on the toilet surfaces.
Additionally, having bodily fluids or waste sitting in the toilet bowl can increase the chances of mold creation. If the toilet tank pipes are rusty, this may also lead to more frequent molding in the toilet tank itself. Mold also loves small dark areas, and so if your toilet tank has any small cracks in it, this is also an excellent place for mold to flourish.
Specifically, if mold is growing in the toilet tank, it is often due to infrequent use. When a toilet is not flushed often, the stagnant water becomes warm, and the chlorination of the water also decreases, leading to a higher chance of mold growth.
Ec3 Laundry Additive Method
Laundry additive in a toilet? Sounds weird I know. You could use EC3 mold solution concentrate. That works just as well. But I like the laundry additive because it is meant to withstand agitation in the washing machine as well as a high volume of water.
To learn why I love the EC3 product line so much as well as HOW it works to kill both mold and mycotoxins, check out this detailed post about EC3.
Don’t Miss: How To Remove Mold Spores From Furniture
Cleaning Mold From The Toilet Bowl
I am sharing not only the best way to remove mold from yourtoilet bowl but also a few other options should you preferto try one of those first.
Before you begin, start by closing the water supply line. Locate the shutoff on the wall behind the toilet and twist the valve completely clockwise to close. Then flush the toilet and drain out as much water from the bowl and tank as possible.
What Causes Black Mold In Toilet Bowl
Mold spores thrive in dark, damp places so its only natural to find mold in your toilet. However, some toilets can become moldier than others depending on your water or if you have calcium deposits built up in your toilet.
Ive even heard that if your body has higher glucose levels from diabetes, your excrement can cause additional toilet mold!
Don’t Miss: Can Mold Get In Your Lungs
Is White Vinegar Ok For Cleaning The Tank
Some people wonder whether they can put white vinegar in their toilet tank. Unlike bleach, vinegar is completely safe for the tanks insides and it deletes the stains and dirt very well. How much vinegar do you put in your toilet to clean it? To clean the tank, just pour three cups of vinegar to the tank and leave for half an hour and then flush.
If Its Growing In The Toilet Tank
Mold which is growing in the toilet water tank may be due to the following causes
- Infrequent flushing if the toilet in question is not used very often this can lead to mold or mildew. The water turns stagnant and mold spores enter and feed on nutrients and algae which tend to be present in the water supply. Also, the stagnant water will gradually lose the effectiveness of the chlorine which helps prevent mold formation and the temperature may warm to room temperature, making it even more attractive for mold to make a home.
- Contaminated water supply see above.
- Infrequent cleaning most people do not think to clean here often, if ever, and so there may be mineral deposits on the sides which can gather and feed any mold spores that manage to get in. It is also dark which mold loves.
Also Check: What To Do About Mold In Home
Signs Of Mold Growth In Toilets
It can be off putting to lift the lid of the toilet and spot unsightly black rings or worse lurking deep within.
You might be in a public toilet, at a friends house or perhaps in a café, bar or other social establishment. You might begin to wonder if you really need to go after all and whether you can just put it off, I mean, that thing looks like a health hazard, right?
But what does it mean when it happens to your own toilet at home? And how did it get there?
In this guide we will examine exactly how mold gets into a toilet and what steps to take to treat it and prevent it from coming back.
Lysol Automatic Toilet Cleaning Click Gel
While this gel is advertised as a cleaning solution for the toilet bowl, its just as efficient in cleaning the toilet tank as it is for the toilet bowl. Just like in the toilet bowl, you just smear the gel around the edge of the toilet tank such that its in constant contact with the water. This way, it dissolves with time and cleans the tank. Its also added a fragrance to make it smell nice.
Picking one of these will make your toilet cleaning process effortless but with great results.
More on Toilet Cleaning
Don’t Miss: How To Kill Black Mold In Attic
Where Do You Find It
Toilet mold loves moist and dark places because it favors its growth. Therefore, if you have a calcium deposit or your toilet is damp, then you are at risk of having mold. You can find these mold in the bowl because it is a conducive environment. You might also notice a greyish-black ring on the upper rim of your toilet bowl.
Recommended Reading: Prevent Mold On Bathroom Ceiling
Maintaining Your Toilet Tank
To avoid nasty buildup and extensive cleaning sessions, consider using drop-in tablets to help maintain your toilet tank and prevent the formation of mildew, rust, and bacteria, making it a lot easier to clean the next time around.
Look for tablets that are non-toxic and bleach freethe harsh chemicals found in some drop-ins have been known to cause corrode and cause damage to toilet tank parts.
You May Like: How To Get Mold Off Aluminum Siding
Section 2 Of : Cleaning With Baking Soda Vinegar And Dish Soap
How To Clean A Toilet Tank
Also Check: How To Remove Mold From Clothes With Hydrogen Peroxide
What Is Black Mould And Why Does It Form
Mould is a fungus that grows in damp, warm conditions, such as a bathroom, where there is very little airflow. It can start as mildew, a white form of fungus found on a flat surface.
The growth of black mould on bathroom walls and ceilings is due to excess moisture, which may start with condensation building up over time following a shower or bath. The warm, moist air meets a cold surface and clings to it, like windows.
Mould can build-up for many reasons, apart from a lack of ventilation in your bathroom these include leaking pipes, poor insulation or if condensation has not been removed following a shower.
Recommended Reading: How To Clean Bathroom Ceiling
What To Do If There Are Obstinate Stains
Here and there on the white porcelain of toilets appear hard stains during exploitation.
If you dont use the toilet the problem arises from the water staying inside. Colored rings and remains appear on the surfaces and spoil the look.
To remove them you can clean the toilet with vinegar plus second powerful ingredient soda!
Recommended Reading: How Do You Identify Black Mold
How To Clean Mold In Toilet
If you do discover mold growing in your toilet, dont panic. Because toilets are made of glazed porcelain, they can be cleaned using common household cleaners , and likely wont need to be replaced. Its important to remember, however, that cleaning mold requires killing and removing the fungus completely, so that it doesnt continue to grow even after youve removed the surface growth.
The first thing you need to do is get a good pair or rubber gloves. Then, flush the toilet and try to drain out as much of the water as you can.
Next clean the toilet bowl with a mild household cleaner and the toilet brush or a rag to loosen the mold. Flush and repeat until all the mold appears to be gone.
Now pour a cup of bleach into the toilet bowl and let it sit for 15-30 minutes. Never use ammonia when cleaning with bleach because the mixture emits a toxic gas.
Flush and then clean the toilet bowl one last time. You can either use a diluted bleach solution , or a commercial disinfectant, like RMR-141 Mold Killer. Scrub with the toilet brush and flush again.
If you have mold in the toilet tank, pour distilled vinegar into the tank and let sit for 20-30 minutes. Bleach is corrosive and could affect the plumbing parts in the tank, so it is better to use vinegar. Flush a few times, scrubbing inside of the tank if needed. Repeat until the mold is gone.
Ways To Remove Toilet Mold
Because toilets are made of glazed porcelain, removing mold from them is usually pretty easy. A word of caution NEVER use bleach to clean mold. Please read that post if you are considering a bleach cleaner in your toilet. Also, never use a pumice stone to scrub the inside of your toilet. This damages the porcelain.
Since mold can be hazardous to your health, you want to makesure that you are wearing a mask, eye protection, and gloves before using oneof these methods to remove mold from the toilet bowl or tank.
Don’t Miss: Can You Get Mold Out Of Wood
How To Clean Hard Water Stains From Toilet
If that doesn’t get the job done, try it again, but this time replace the first two steps with the simple step of adding 1/4 cup of borax.
Is Toilet Mold Dangerous
The black mold growing in the tank, behind it, and under the toilet bowl can be a hazard to anyone, healthy or unhealthy. According to EPA and other health experts, exposure to mold can lead to a stuffy nose, wheezing, red or itchy eyes and skin, hay fever and shortness of breath.
It is worse, especially for individuals who are allergic to spores. It is recommended that you have safety measures put in place so as not to encourage its growth. You could put on a respirator so that the spores from the mold dont trigger allergic reactions as you clean.
Further Reading
Don’t Miss: Can Mold In Home Make You Sick
How To Remove Black Mold In Toilet
Black mold removal needs to done correctly. Prolonged exposure to the spores is dangerous, so its essential that you take care of the problem swiftly and use the right equipment.
Before you begin, put together everything youll need: goggles, gloves, boots and breathing protection. Get bleach to kill it, borate and one other household cleaner. Open windows so that youre not breathing in the bleach. If your bathroom doesnt have windows, open the door and open doors and windows in other parts of the house to keep air flowing. After that, youre ready to begin.
Step 1: Flush the toilet and drain as much water out of it as possible.
Step 2: Use a cleaner, such a spray bottle of vinegar or some laundry detergent, to clean the toilet and loosen the fungus. Flush. Repeat this step until you no longer see the toilet mold.
Step 3: Put a cup of bleach into the toilet and let it sit. Do the same with the toilet tank if youve seen evidence of a problem there, too. Leave it for 15-30 minutes. Do not add ammonia because the mixture emits a toxic gas. Do not add other household cleaners. Flush and repeat.
Step 4: Using a mixture of water and bleach , scrub down the toilet boil and tank while wearing gloves.
Step 5: Flush your toilet again and dry as much of it as you can. Flush again.
Step 6: Apply borate, which can be found in the laundry aisle at the grocery store, to your toilet bowl. This can prevent mildew from growing again.
Step 7: Wash your hands and face.
Contact Your Local Puroclean Office For Mold Remediation Services
We recommend that mold remediation and cleanup should be handled by professionals whenever possible. PuroClean specializes in mold removal and cleanup, as well as remediation of the source of mold odor to return your home or business to its pre-loss condition. Mold remediation may be a time-consuming process, and PuroClean has the knowledge and technology needed for the job. Give us a call 24/7 at 1-800-775-7876, or head to our website to get connected with your local office immediately.
Don’t Miss: How Can I Tell If There’s Mold In My House