Does Bora Care Kill Mold

Bora Care Vs Fumigation

Mold Remediation using Bora-Care with Mold-Care

23% Bora-Care finished dilution applied for remedial treatment, both eliminates and prevents infestations of dampwood, drywood, Formosan and native subterranean termites. It may also be used as a supplemental treatment or non-toxic alternative to whole house fumigation in order to provide long-term residual control. Bora Care for termites is intended for post-construction and whole house treatments.

Bora Care method of wood pest control is more eco-friendly than chemical fumigation with Vicane and bromo-gas. Borates do not contain and dont emit VOCs , which can destroy protective ozone layer. When you treat your home with boracides, you dont need to take away pets, plants and food and leave your house for some times.

Professional Bora Care termite treatment and fumigation with orange oil can be applied when the homeowner is pregnant, as they show low toxicity on humans when applied as directed.

Stop Mold Growth With Bora

Mold infestations must be taken care of quickly to prevent further damage to the structure. With Bora-Care with Mold Care, it doesn’t take long to get rid of mold from homes and businesses. It can be applied in kitchens and other areas where mold has taken hold. It also kills and prevents termites from further damaging the structure. Whether it’s wood rot, mold or carpenter ants, nothing takes care of the problem like Bora-Care.

Mold Doesnt Just Threaten Homes Its Threatening Remodelers

Mold and its potential liability is one of the big threats to remodelers. Courts have ruled that in cases where negligence or fraud is proved, the remodeler’s liability can stretch beyond a one-year warranty to an indefinite amount of time. Imagine being responsible for homes you worked on five, ten or even 20 years ago because of mold.

Thats why every home you remodel should be pretreated with Bora-Care with Mold-Care. It creates a protective barrier against mold, termites and other wood-destroying pests. Cost-effective, Bora-Care with Mold-Care is your solution.

Bora-Care® With Mold-Care® – At A Glance

Easy to apply

There are three basic types of fungi, and none of them have a place in your home.

Mold fungi

Stain fungi

These fungi cause discoloration of wood. While they can present an aesthetic challenge, they are not harmful.

Three types of fungi:

When does fungus grow?

Water is the enemy. If wood becomes wet enough, you will have a fungal problem. If the air is wet enough, you will have a problem. And it doesnt take long. Most building materials can develop mold in about a week of exposure to wet conditions.

Different types of moisture:

Inherent moisture

In a brand new home, all materials contain water. For example, in the average 2000 square foot home, there is an average of six tons of water and it can take six months to dry out. The first year of a house needs good ventilation or mold will occur.

Weather-related moisture

Water in buildings

A Closer Look

Also Check: How Much Does It Cost For Mold Removal In Basement

Will Timbor Kill Mold

Timbortreat moldwillwill killmoldwillMoldCleanmold

Timbor is made from the element Borate, which is a natural occuring element in the earth. It is very safe and non-toxic. Timbor will last for years on the shelf as long as it is not exposed to moisture or water. 24 of 28 people found this answer helpful.

Likewise, can you paint over timbor? Tim-bor is a water soluble, inorganic borate salt with insecticidal and fungicidal properties effective against wood-destroying organisms, including the target pests listed below. Tim-bor should not be applied to wood or cellulose material that has been painted, varnished or sealed.

One may also ask, is timbor safe for humans?

Timbor should not be used near water as it is highly toxic to fish. Timbor is considered to be safe for humans, as it has a very low level of toxicity. Most borate insecticides like Timbor are considered to be relatively safer for use when compared to other more conventional insecticides.

What is timbor used for?

Timbor is an insecticide, fungicide and wood preservative for the protection and treatment of lumber against fungal decay and wood destroying insects . Timbor gets its preservative power from the active ingredient DOT .

Bora Care Mixture Shelf Life

1:1, 1:2 and 1:3 mixing ratio provide 23%, 16% and 13% Bora-Care finished dilutions, which are to be applied within 24 hours after preparing. 1:5 dilution will remain stable for a month . Take into account that unused liquid must be kept in a separate container, it is forbidden to leave the mixture under pressure overnight and for longer period of time.

Don’t Miss: How To Kill Mold In Washing Machine

How Effective Is Bora

Bora-Care simply eliminates wood as a food source. In addition, hundreds of studies have confirmed the effectiveness of borates as a preservative, including more than 40 studies confirming its wood-protecting power. Bora-Care prevents subterranean termites from tubing across treated wood and other structural materials.

How Do You Apply Borax To Wood

A Borax component within the wood means this wood will be effective at repelling pest animals, inhibiting fire and curing faster by being treated with a simple Borax and water solution. Spray one side and then turn on edge and spray the edge, and turn and spray the back, and turn and spray the edge.

Target Applications Of Bora Care For Termites

Bora-Care for termites is appropriate for indoor and outdoor applications. This product can be applied for:

pre-construction treatment

whole house treatment

remedial treatment

Bora Care coats the wood surfaces with protective borate layer to preserve wood structure against termite infestations in future. Nisus Bora-Care isnt intended for soil treatments.Application directions and mixing instructions of Bora Care for termites’ treatment in different materials

Wood to be treated against termites	Dilution ratio	Application
Use the 1:3 mixing ratio for active remedial treatment of termites. Use the 5:1 dilution ratio for prevention.

Ways To Use Boracare With Mold Care

How to use BoraCare with Mold Care to treat wood

1. New Construction

When a home is being built, all wood is accessible. This is the perfect time to do a whole house Bora-Care with Mold-Care treatment. This whole house treatment protects all wood from mold, termites, carpenter ants and wood boring beetles, and even discourages general pests such as cockroaches. Bora-Care with Mold-Care diffuses into the wood and remains in the wood, delivering residual power for years of protection.

2. Water Damaged Materials

If there has been damage from water such as rain, flood waters or leaking pipes, apply Boracare with Mold Care to the affected wood after the damaged wood has been cleaned and dried. After cleaning, wood decay or mold can begin to grow at once. If you apply Mold Care, you can stop the wood decay immediately as you kill the existing mold. In the advent of future flooding, you are protecting the wood, as well. Besides stopping the mold growth, Boracare with Mold Care sanitizes and disinfects damaged wood, creating a buffer zone.

3. Preventative application

To prevent high risk areas such as crawl spaces, bathrooms and kitchens, use Boracare with Mold Care as a one time preventative application. It may be applied either in a new construction phase or post construction.

Also Check: How Many Parts Bleach To Water To Kill Mold

How Do You Get Rid Of Powderpost Beetles Naturally

Borate-containing products will pentrate and get rid of Powderpost beetles inside the wood as well as those entering or exiting the surface of the wood. BoraCare and Timbor also attack the larvae inside the wood, preventing them from causing further surface damage in the future when they would have emerged as adults.

Should I Use Bleach To Clean Up Mold

Biocides are substances that can destroy living organisms. The use of a chemical or biocide that kills organisms such as mold is not recommended as a routine practice during mold cleanup. There may be instances, however, when professional judgment may indicate its use . In most cases, it is not possible or desirable to sterilize an area a background level of mold spores will remain – these spores will not grow if the moisture problem has been resolved. If you choose to use disinfectants or biocides, always ventilate the area and exhaust the air to the outdoors. Never mix chlorine bleach solution with other cleaning solutions or detergents that contain ammonia because toxic fumes could be produced.

Please note: Dead mold may still cause allergic reactions in some people, so it is not enough to simply kill the mold, it must also be removed.

For more information on mold:

Where To Use Bora

Bora-Care can be used on new construction to protect the wood from future mold and insect damage. It’s ideal for use on already water-damaged wood and porous surfaces and prevents the mold from causing further damage. If the structure is in a flood zone, applying Bora-Care with Mold Care on the wood will protect it from mold growth. It’s safe to use in homes, offices, apartments and other residential and commercial areas, including farms, stables and kennels. It targets destructive mold and also other wood-damaging pests like termites, beetles and ants.

How To Apply Bora Care For Termites Diy

Bora care for termites can be easily applied to surfaces of wood or other construction materials. The finished dilution can be brushed on structure with a paint brush, or rolled on, or sprayed on, as DOT products require direct contact with the wood for better penetration inside and soaking through. Boracare termite treatment establishes a borate barrier in the food source, so treated wood wont be breached. The borate barrier remains in place to continue controlling different termite species. Once Bora Care in the wood, it will protect the wood for a lifetime.

Solutions from Bora Care concentrate are applied effectively to bare wood and surfaces where a water repellent or other finish is not present. Prior to application, it is necessary to remove finisn and paint. Prior to treatment, it is required to clean interior, unfinished surfaces, especially when dirt accumulated on them, with a strong detergent.

Mix a 23% Bora-Care finished dilution to the point of surface saturation to all interior and exterior wood surfaces. Apply 2 coats of Bora-Care solution to log ends, notches, corners and sill logs. Wait at least 1 hour before reapplication.

You May Like: How To Check For Mold In The Air

Does Boracare Kill Powder Post Beetles

POWDER POST BEETLE CONTROL IN ATTICS AND CRAWL SPACES For light to moderate infestations Boracare will do an excellent job. In attics and crawl spaces you may find old house borer damage also. This beetle is much bigger than the powderpost beetle and their exit holes are huge. Boracare will kill these also.

How Do I Get Rid Of Powder Post Beetles

Surface Treatments- Active infestations present in bare, exposed wood should be treated with a pesticide containing borate, such as BoraCare or Timbor. Borate-containing products will pentrate and get rid of Powderpost beetles inside the wood as well as those entering or exiting the surface of the wood.

You May Like: Do Water Filters Remove Mold

Inhibits Mold Growth & Stops Wood Destroying Insects

Mold Care prevents the growth and establishment of mold, dry rot or wet rot. Mold Care was formulated to work with Bora-Care. Boracare will add protection from wood destroying insects such as Termites, Powderpost Beetles, Anobiid Beetles, Old House Borers and Decay Fungi for years. Application of Bora Care with Mold Care can be used on bare wood, drywall, particleboard or OSB. This product is designed to penetrate wood it doesn’t just remain on the surface. It will penetrate and absorb into the interior of the wood for inside out protection.

This is a picture from Nisus showing results from a test inside a mold incubator for six months. Half of the wood was left untreated. Mold grew on the untreated side.

Mold Treatment & Removal:

Bora-Care with Mold-Care – Mold-Care Training for Builders and Remodelers

Why should you use Bora-care® with Mold-care®? How does this benefit you and your home or property?

Bora-Care with Mold-Care helps prevent and control wood decay fungi Mold-Care is labeled for the control and prevention of mold and wood surface fungi. This combination provides the best solution for controlling decay fungi and mold on wood in structures. This combination offers the most effective solution in preventing mold-like substances from evolving and/or escalating in your crawl space.

A Bora-Care with Mold-Care is typically applied to wood surfaces in the structure to kill and prevent wood decay, mold and other wood destroying organisms.

During new constructions, the treatment is applied to all wood in the structure.

In existing structures, Bora-Care with Mold-Care is applied to wood in areas such as crawl spaces, attics, and basements and is usually done in conjunction with mechanical moisture controls such as auto-vents.

Dryer vents that send air into crawl spaces
Everyday familiy activities such as cooking, bathing – evenbreatthin

Without proper ventilation and insulation, mold and fungi will grow from the moisture that condenses on walls. Bora-Care with Mold-Care acts as a mold and fungal decay preventative against the damaging effects of water and the conditions that promote insect infestation.

Various types of fungi:

Fungi come in several different forms. Fungi are visibly noted as black spores or white spores.

Mold fungi

Stain fungi

Also Check: What Are The Effects Of Mold Exposure

Terminix Releases Top 10 Cities For Roof Rats

Memphis ranks first in a new list Terminix created by compiling inbound lead data from the more than 300 Terminix branches across the country.

MEMPHIS, TN Move over, clowns. Something much scarier is popping up across the country.

Things that go bump in the night might be in your attic and they could be roof rats. Leading pest control provider Terminix today announced the top 10 cities with the most reported roof rat infestations, giving Memphis, Tenn., the “honor” of the top spot. Autumn is a very active time of year for these pests, as roof rats often seek entry into homes after their outdoor food sources are exhausted.

The cities in the United States with the most reported roof rat infestations are:

1. Memphis, Tenn.

9. San Antonio, Texas

10. Plano, Texas

The list was created by compiling inbound lead data from the more than 300 Terminix branches across the country. The rankings represent metropolitan statistical areas with the highest volume of leads from Jan. 1, 2016 to Aug. 31, 2016. to read the entire Terminix press release.

Does Timbor Kill Mold

Timbortreat moldwillwill killmoldwillMoldCleanmold

Timbor should not be used near water as it is highly toxic to fish. Timbor is considered to be safe for humans, as it has a very low level of toxicity. Most borate insecticides like Timbor are considered to be relatively safer for use when compared to other more conventional insecticides.

what is timbor used for? Timbor is an insecticide, fungicide and wood preservative for the protection and treatment of lumber against fungal decay and wood destroying insects . Timbor gets its preservative power from the active ingredient DOT .

Also to know is, how long does timbor treatment last?

Will timbor kill powder post beetles?

The surface of unpainted or otherwise unprotected wood can be treated, and the galleries injected with disodium octaborate tetrahydrate such as BoraCare or Timbor. These products kill exposed larvae and prevent re-infestation when the eggs hatch and immature larvae begin to penetrate the wood.

Don’t Miss: How To Detect Mold In Carpet

How Do You Mix Bora Care With Mold

MixBoraCare with Mold CareMixmixed solutionBoracare Mold Care

Not only does Bora–Care with Mold–Care treat mold, but it also acts as a surface protectant, killing all forms of fungi, sanitizing and disinfecting the treated area. In addition, wood treated with Bora–Care with Mold–Care will render wood impervious to termites, powderpost beetles and othe wood-destroying insects.

Furthermore, how do you kill wood destroying fungus? Although borates will kill wood destroying fungi, it will not add strength to the damaged wood. The most effective and common method for moderate to severe damage is to replace the damaged wood. However, if only a small area is affected, borates and reinforcing the damaged wood are a cost-effective alternative.

Similarly, is Boracare toxic?

Answer: Boracare is known to be a green product and less toxic than many other wood preservative products. Having said that, any product that has the ability to kill insects and fungus does have some level of toxicity. Once dry, Boracare is known to be less toxic than common table salt.

Does mold rot wood?

Mold and wood rot are both produced by fungi, but one is more dangerous to wood than the other. While mold is unhealthy, it will not break down wood like wood rot does. However, because mold also requires moisture to form, its presence is a warning that wood rot could happen.

Does Boracare Kill Mold

4.9/5BoraCareMoldBoraCareMoldkillingBoracare

Not only does Bora–Care with Mold–Care treat mold, but it also acts as a surface protectant, killing all forms of fungi, sanitizing and disinfecting the treated area. In addition, wood treated with Bora–Care with Mold–Care will render wood impervious to termites, powderpost beetles, and other wood-destroying insects.

Similarly, how long does Bora care last? For registered pest control companies registered under the BoraShield program, Levels 1-3 cover product replacement, labor and damage repair up to $2500 for a period of 12 years. The mold protection in Levels 4 and 5 covers product replacement for 25 years.

Also to know, how do you kill wood destroying fungus?

Although borates will kill wood destroying fungi, it will not add strength to the damaged wood. The most effective and common method for moderate to severe damage is to replace the damaged wood. However, if only a small area is affected, borates and reinforcing the damaged wood are a cost-effective alternative.