Thursday, March 28, 2024

Do It Blade Bait Mold

Preventing Mould In Packed Maple Syrup

How to Build a Spinner Bait – Using the Do-It Ultra Minnow Spinner Jig Mold

Preventing mould in packed maple syrup can be a challenge. Cold-packing syrup usually guarantees mould will grow in bottled containers and can impart off-flavour in the syrup. The commercial maple industry has requested to the provincial government that hot packing be made mandatory for producers and regulated to prevent mould, to ensure food safety and to uphold the reputation of Ontario maple syrup as a quality product.

Maple researchers at the University of Maine and at Carleton University in Ontario are investigating whether current hot packing recommendations require refinement to preserve quality and prevent mould in syrup.

Mould growth often forms at the surface of the syrup in unopened containers that are improperly hot packed. Mould can also develop in maple syrup after the sealed container is opened and is not refrigerated during consumption. Always refrigerate maple syrup after opening sealed containers.

Figure 1

Fresh maple syrup is usually filtered immediately after being drawn off the evaporator while it is still hot. Immediately after filtering to remove sugar sand, the syrup is either hot packed at 85 °C into bulk food-grade containers, or the syrup is hot packed at 85 °C into new small containers of various sizes for direct market sales.

Figure 2

Figure 3

Question For Blade Bait Experts

  • Posts: 451March 18, 2022 at 10:44 am#2108765

    For you guys that fish a lot of blade baits, what would be the subtle differences that you find when fishing slightly different style blades, like in the photo. Why would you prefer one blade over the other, or do they all fish basically the same? Do you fish different styles in different situations, or am I just overthinking this? Im thinking of starting to make my own also and wondering what mold/molds would be the best. Thanks.

    Attachments:

A couple rips with each would quickly tell me which I would prefer. Biggest issue would be if the trebles fowled up on the line/snap. I would start with the bottom, then top. The middle one looks like it would fowl up the easiest.

An important note would be to keep constant contact with the lure on the drop. . Also, I tie a heavy test mono leader to help keep it from wrapping up.

Ive also made a few of my own based on the bottom one in your photo.

Here are the ones I dabbled with. It was more just to see if I could catch fish on something I made.

You can lose hours reading all the blade bait threads here fyi. I might know that from experience

Attachments:

Ill try to answer with another question. Why would you through a stick bait like a husky jerk Vs a shad rap?

Each blade has a different action. Some wiggle, some wobble, some dont do much at all. Feed the fish what they want to eat. Btw avoid a wobble in heavy current

Good luck.

I Whipped Up A New Blade Bait Mold Tonight

I need to add hooks and test them out soon…

Last edited by 21XDC 10-12-2016 at 04:40 PM.

317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176

Nice !! Need a couple 3/4s…..

BULLET 20 XRD/250 Merc Sport XS

These are chrome/nickle plated… But You can buy gold plated from B3 Blade baits.

317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176

Very Cool!!!I am very interested to see how it will perform. Looks like it should run good. Does the blade blank have holes in it so the lead doesn’t come off?

Last edited by 21XDC 10-14-2016 at 05:28 AM.

317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176

, I like the other one you made better….but what I like and what the fish like are two different things

, I like the other one you made better….but what I like and what the fish like are two different thingsWhat other one?

Mike very nice. They remind me of silver buddySilver buddy is just another copy of the Heddon Sonar….. The original blade bait.

317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176

! Of all the blades you have made, which one fished the best? .

Last edited by 21XDC 10-14-2016 at 07:32 PM.

317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176

64,104
29,121
946

Recommended Reading: How Much Crown Molding Cost

Do It Molds Blade Bait

The Do It ZV-5-A blade bait mold makes a vibrating lure that deep schooled fish cant resist. The ZV-5-A is versatile enough to be used for jigging, casting and trolling. Style ZV Vibrating Lures shimmy through the water for everything from river smallmouth to suspended walleye and largemouth bass.

Do it vibrating mold?

The Do It ZV-4-24 vibrating lure mold makes lures that catch fish, especially hard-to-reach schooling fish. Fish respond to vibrations given off by these lures, expecting their next meal. Versatile enough to be used for jigging, casting and trolling.

Do it molds crankbait blanks?

2.7 Spittin Popper Price: $5.49 2.7 Chuggin Popper Price: $5.49 2.75 Standard Popper Price: $6.75
Suspending Jerkbait 110 Price: $6.75 Suspending Jerkbait 110 Deep Price: $6.75 Minnow Lipless 2/5oz Price: $5.49
Foiled Shad Lipless 1/2 oz Price: $6.75

Popular Articles
Related news